Hi Fabio,
On 08.11.22 23:16, Fabio Estevam wrote:
Hi Oliver and Stefano,
On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic <sba...@denx.de> wrote:
I have tried to merge the series, but I get build errors, see:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
Could you take a look ?
One problem I noticed is the missing CONFIG_TEXT_BASE conversion:
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index 3507489a813c..442e64badc39 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
index 01183f8ade63..e8df5bb8bfea 100644
--- a/arch/arm/dts/imx8qxp-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
With this fix applied, I got:
WARNING './ahab-container.img' not found, resulting binary is not-functional
make[1]: Nothing to be done for 'SPL'.
BINMAN all
binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
spl/u-boot-spl.cfgout -T imx8image -e 0x100000
./mkimage-out.spl.mkimage': Fail open first container file
ahab-container.img
This is normal, but CI creates fakes. Most of built boards have warnings
that build does not run. It is nopt a problem.
make: *** [Makefile:1116: all] Error 1
but if I manually copy the firmware, then the build succeeds.
binman should not thrown an error in case of missing firmware. Oliver,
any ideas?
Also, some boards use ahab-container.img and others use
mx8qxc0-ahab-container.img.
Is it OK to use mx8qxc0-ahab-container.img for all of them?
I try a CI run with this fixed applied and I let you know.
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
