The purpose of the patch set is to enhance the peripheral clock to
support both at9sam9x5's and at91rm9200's peripheral clock, and align
the clk-master's and at91-pmc's compatibles with kernel.
Changes in v4:
- Incorporate [PATCH v2] clk: at91: pmc: align the at91 pmc's compatibles.
- Rebase on
Enhance the peripheral clock to support both at9sam9x5's and
at91rm9200's peripheral clock via the different compatibles.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Use an enum with a descriptive name to denote the clock typ
Add the compatible "atmel,at91rm9200-clk-master" to align with
the kernel.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Add the Reviewed-by tags.
drivers/clk/at91/clk-master.c | 1 +
1 file changed, 1 insertion(+)
diff --gi
Align the at91 pmc's compatibles with kernel.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
Reviewed-by: Andreas Bießmann
---
Changes in v4:
- Incorporate [PATCH v2] clk: at91: pmc: align the at91 pmc's compatibles.
- Rebase on the master branch (22e10be45) of u-boot-dm git tree.
- Ad
From: Hou Zhiqiang
Signed-off-by: Hou Zhiqiang
---
configs/ls1043aqds_defconfig | 1 +
configs/ls1043aqds_lpuart_defconfig | 1 +
configs/ls1043aqds_nand_defconfig| 1 +
configs/ls1043aqds_nor_ddr3_defconfig| 1 +
configs/ls1043aqds_qspi_defconfig| 1 +
conf
From: Hou Zhiqiang
The PPA is a EL3 firmware, which support PSCI, hotplug,
power-management features etc.
Signed-off-by: Hou Zhiqiang
---
board/freescale/ls1046aqds/ls1046aqds.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c
b/board/freescale/
From: Hou Zhiqiang
The PPA is a EL3 firmware, which support PSCI, hotplug,
power-management features etc.
Signed-off-by: Hou Zhiqiang
---
board/freescale/ls1043aqds/ls1043aqds.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c
b/board/freescale/
From: Hou Zhiqiang
Signed-off-by: Hou Zhiqiang
---
configs/ls1046aqds_defconfig | 1 +
configs/ls1046aqds_lpuart_defconfig | 1 +
configs/ls1046aqds_nand_defconfig| 1 +
configs/ls1046aqds_qspi_defconfig| 1 +
configs/ls1046aqds_sdcard_ifc_defconfig | 1 +
conf
The patches is rework the uart init to fix the early debug not work
in SPL, and add the clock support.
Changes in v3:
- Rebase on the master branch (22e10be45) of u-boot-dm git tree.
Changes in v2:
- Fix the DBGU clock handling.
- Add Reviewed-by tag.
Wenyou Yang (2):
serial: atmel_usart: F
Add the clock support.
Note that the clock handling of the DBGU peripheral is different
from the USART.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v3:
- Rebase on the master branch (22e10be45) of u-boot-dm git tree.
Changes in v2:
- Fix the DBGU clock handling.
- Add
Add the uart init function to be used on both probe and the early
debug uart init. For the latter, the input clock should be from
CONFIG_DEBUG_UART_CLOCK.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
drivers/serial/atmel_usart.c | 36
Hi Simon,
On 04/11/2017 09:55 PM, Simon Glass wrote:
Hi Kever,
On 9 April 2017 at 20:36, Kever Yang wrote:
Hi Simon,
On 04/10/2017 03:28 AM, Simon Glass wrote:
Hi Kever,
On 7 April 2017 at 04:35, Kever Yang wrote:
Need to enablt CONFIG_OF_EMBED if we use separate uboot and dtb
in FIT i
Number of blocks is a 9 bit field where 0 stands for a unlimited
number of blocks. Therefore the max number of blocks which can
be set is 511.
Signed-off-by: Heiner Kallweit
---
drivers/mmc/meson_gx_mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/meson_gx_mm
In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
was assigned dev number 1 (0 is the SD slot). So on uboot prompt
we had to manually switch the mmc device first.
Therefore change the device number assignment. Thanks to Jaehoon for
the hint how to do it.
In addition allow to s
In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
was assigned dev number 1 (0 is the SD slot). So on uboot prompt
we had to manually switch the mmc device first. Therefore change the
device number assignment.
Signed-off-by: Heiner Kallweit
---
arch/arm/dts/meson-gxbb-odroid
Support storing uboot environment in eMMC.
Signed-off-by: Heiner Kallweit
---
include/configs/meson-gxbb-common.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/meson-gxbb-common.h
b/include/configs/meson-gxbb-common.h
index cc2b5b6..5951263 100644
--- a/
> -Original Message-
> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Yogesh Gaur
> Sent: Thursday, April 13, 2017 2:35 PM
> To: u-boot@lists.denx.de; york sun
> Cc: Priyanka Jain ; Yogesh Narayan Gaur
>
> Subject: [U-Boot] [PATCH] driver: net: fsl-mc: Update fsl_mc_ldpa
From: Hou Zhiqiang
Signed-off-by: Hou Zhiqiang
---
include/configs/ls1046a_common.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 8ec1247..2779bb4 100644
--- a/include/configs/ls1046a_common.h
+++ b/incl
Hi David,
On 04/14/2017 05:02 PM, David Wu wrote:
If the tx_delay is not enabled, the RGMII/1000M can't work.
Signed-off-by: David Wu
---
arch/arm/include/asm/arch-rockchip/grf_rk3288.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-rockchip/g
> On 14 Apr 2017, at 11:02, David Wu wrote:
>
> If the tx_delay is not enabled, the RGMII/1000M can't work.
>
> Signed-off-by: David Wu
> ---
> arch/arm/include/asm/arch-rockchip/grf_rk3288.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/include/asm/arch-roc
On 31 March 2017 at 22:23, Simon Glass wrote:
>
> On 29 March 2017 at 13:20, Philipp Tomsich
> wrote:
> > The RK3399 hangs during DMA of the Designware MMC controller, when
> > performing DMA-based transactions in SPL due to the DDR security settings
> > left behind by the BootROM (i.e. accesses
On 31 March 2017 at 22:23, Simon Glass wrote:
> On 29 March 2017 at 13:20, Philipp Tomsich
> wrote:
>> Signed-off-by: Philipp Tomsich
>
> Always nice to have a commit message. Also, please can you always add
> a 'rockchip: ' tag?
>> ---
>>
>> Changes in v3: None
>>
>> arch/arm/dts/rk3399-puma.d
On 9 April 2017 at 13:27, Simon Glass wrote:
> On 5 April 2017 at 16:19, Heiko Stuebner wrote:
>> Most Rockchip socs have the ability to either map the bootrom or a sram
>> area to the starting address of the cpu by flipping a bit in the GRF.
>>
>> Newer socs leave this untouched and mapped to th
On 9 April 2017 at 13:28, Simon Glass wrote:
> On 7 April 2017 at 04:12, Kever Yang wrote:
>> The lower address is reserved for ATF, do not use it.
>>
>> Signed-off-by: Kever Yang
>> ---
>>
>> include/configs/rk3399_common.h | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> Acked
On 9 April 2017 at 13:27, Simon Glass wrote:
> On 5 April 2017 at 16:19, Heiko Stuebner wrote:
>> Somehow 43b5c78d8d91 ("rockchip: cosmetic: Sort RK3288 boards") moved
>> the rock board in between some rk3288 board, probably as a result of
>> rebasing.
>>
>> So move it back to its original positi
On 11 April 2017 at 07:55, Simon Glass wrote:
> On 9 April 2017 at 20:17, Eric Gao wrote:
>> To enable mipi display, we need to enable pmic
>> rk808 first for lcd3v3 power,which use i2c0 to
>> communicate with soc. So enable i2c0.
>>
>> Signed-off-by: Eric Gao
>>
>> ---
>>
>> arch/arm/dts/rk339
On 5 April 2017 at 21:44, Simon Glass wrote:
> On 1 April 2017 at 00:46, Eddie Cai wrote:
>> tinker board support ethernet and usb host, so enable USB, PXE and DHCP
>> support.
>>
>> Signed-off-by: Eddie Cai
>> ---
>> include/configs/tinker_rk3288.h | 5 -
>> 1 file changed, 4 insertions(+
On 9 April 2017 at 13:28, Simon Glass wrote:
> On 7 April 2017 at 11:09, Philipp Tomsich
> wrote:
>> The RK3399-Q7 (Puma) DTS should (of course) be dual-licensed.
>> This updates the licensing info in the rk3399-puma.dts.
>>
>> Signed-off-by: Philipp Tomsich
>>
>> ---
>>
>> arch/arm/dts/rk3399-
On 9 April 2017 at 13:28, Simon Glass wrote:
> On 7 April 2017 at 04:38, Heiko Stuebner wrote:
>> The warm-reset of rk3188 socs keeps the remap setting as it was, so if
>> it was enabled, the cpu would start from address 0x0 of the sram instead
>> of address 0x0 of the bootrom, thus making the re
On 11 April 2017 at 07:55, Simon Glass wrote:
> On 9 April 2017 at 20:41, Eric Gao wrote:
>> For using mipi display, we need to enable lcd3v3
>> which supplied by rk808,so enable rk808 first.
>>
>> Signed-off-by: Eric Gao
>> ---
>>
>> arch/arm/dts/rk3399-evb.dts | 39 ++
On 9 April 2017 at 13:28, Simon Glass wrote:
> On 7 April 2017 at 11:13, Philipp Tomsich
> wrote:
>> From: Klaus Goger
>>
>> The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
>> connector) system-on-module from Theobroma Systems, featuring the
>> Rockchip RK3399.
>>
>> It provides t
On 10 April 2017 at 20:13, Kever Yang wrote:
> Hi Eric,
>
>
>
> On 04/10/2017 09:53 AM, Eric Gao wrote:
>>
>> when enable PMIC rk808,the system will halt at very
>> early stage,log is shown as bellow.
>>
>> INFO:plat_rockchip_pmu_init(1211): pd status 3e
>> INFO:BL31: Initializing runtim
On 5 April 2017 at 21:44, Simon Glass wrote:
> On 1 April 2017 at 00:49, Eddie Cai wrote:
>> Now that most rockchip SoC based board have usb host support, enable
>> USB boot targets by default.
>>
>> Signed-off-by: Eddie Cai
>> ---
>> include/configs/rockchip-common.h | 1 +
>> 1 file changed,
There are 3 region used by rk3399 ATF:
- bl31 code, locate at 0x1;
- cortex-m0 code and data, locate at 0xff8c;
- bl31 data, locate at 0xff8c1000 ~ 0xff8c4000;
SPL_TEXT_BASE starts from 0xff8c2000, we need to reserve memory
for ATF data, or else there will have memory corrupt after SPL
loa
On 10 April 2017 at 13:24, Simon Glass wrote:
> An early version of this is available upstream. Bring it in as a starting
> point. This is from dtc upstream commit e56f2b0.
>
> Future work will plumb it into dtoc and remove the now-unnecessary local
> libraries.
>
> Signed-off-by: Simon Glass
> -
On 04/13/2017 07:41 PM, Ley Foon Tan wrote:
> Restructure clock manager driver in the preparation to support A10.
> Move the Gen5 specific code to _gen5 files.
>
> - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift.
> - Check return value from wait_for_bit(). So change retur
On 04/13/2017 07:41 PM, Ley Foon Tan wrote:
> Add config and defconfig for the Arria10 and update socfpga_common.h.
>
> Signed-off-by: Tien Fong Chee
> Signed-off-by: Ley Foon Tan
[...]
> @@ -298,7 +306,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> */
> #define CONFIG_SPL_FRAMEW
On 04/13/2017 07:41 PM, Ley Foon Tan wrote:
> Add i2c, timer and other A10 macros.
What's NOC anyway ?
> Signed-off-by: Ley Foon Tan
> ---
> arch/arm/mach-socfpga/include/mach/base_addr_a10.h | 8 +++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-socfpga/
This patch series is a resubmission of the v6 patch series
https://lists.denx.de/pipermail/u-boot/2017-February/281941.html
by Heiner Kallweit.
Patch 1 updates the device tree to a recent Linux version.
Patch 2 add a MMC driver for the GXBB SOC
Both patches are unchanged relative to version 6 of t
To enable booting from MMC the MMC devices 0 and 1 are added to the
BOOT_TARGET_DEVICES.
Signed-off-by: Heinrich Schuchardt
---
v7:
- added this patch to patch series
---
include/configs/meson-gxbb-common.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/meson-gxbb-common.h
From: Carlo Caione
This driver implements MMC support on Meson GX (S905) based systems.
It's based on Carlo Caione's work, changes:
- BLK support added
- general refactoring
Signed-off-by: Carlo Caione
Signed-off-by: Andreas Färber
Signed-off-by: Heiner Kallweit
Tested-by: Heinrich Schuchardt
As a prerequisite for adding a Meson GX MMC driver update the
Meson GXBB / Odroid-C2 device tree in Uboot with the latest
version from Linux.
Signed-off-by: Neil Armstrong
Signed-off-by: Carlo Caione
Signed-off-by: Andreas Färber
Signed-off-by: Heiner Kallweit
Tested-by: Heinrich Schuchardt
This patch is based on
[U-Boot,v6,3/3] odroid-c2: enable new Meson GX MMC driver in board defconfig
by Heiner Kallweit
CC: Heiner Kallweit
Signed-off-by: Heinrich Schuchardt
---
v7:
- made applicable to current U-boot master
v6:
- no changes
---
configs/odroid-c2_defconfig | 5 -
1 file ch
Hi Jean-Jacques,
On 13 April 2017 at 08:17, Jean-Jacques Hiblot wrote:
>
>
> On 09/04/2017 21:27, Simon Glass wrote:
>>
>> Hi,
>>
>> On 7 April 2017 at 05:42, Jean-Jacques Hiblot wrote:
>>>
>>> The PHY framework provides a set of APIs to control a PHY. This API is
>>> derived from the linux vers
Am 14.04.2017 um 12:26 schrieb Heinrich Schuchardt:
> This patch series is a resubmission of the v6 patch series
> https://lists.denx.de/pipermail/u-boot/2017-February/281941.html
> by Heiner Kallweit.
>
A updated version of this series was just applied:
http://git.denx.de/?p=u-boot/u-boot-mmc.git
Kever,
Do we really need to change the SPL layout (i.e. BL2) for this?
The SPL code should remain independent of later stages. This change would tie
the
U-Boot SPL (BL2) to a specific implementation/memory layout of the later BL31
stage.
It should rather remain the responsibility of the BL31 st
Hi Heinrich,
On 04/14/2017 07:26 PM, Heinrich Schuchardt wrote:
> This patch series is a resubmission of the v6 patch series
> https://lists.denx.de/pipermail/u-boot/2017-February/281941.html
> by Heiner Kallweit.
>
> Patch 1 updates the device tree to a recent Linux version.
> Patch 2 add a MMC
There are 3 region used by rk3399 ATF:
- bl31 code, locate at 0x1;
- cortex-m0 code and data, locate at 0xff8c;
- bl31 data, locate at 0xff8c1000 ~ 0xff8c4000;
SPL_TEXT_BASE starts from 0xff8c2000, we need to reserve memory
for ATF data, or else there will have memory corrupt after SPL
loa
This series adds support for SATA using the driver model on omap platforms.
It is based on the work of Mugunthan V N in Feb 2016
The first 2 patches are preparatory work.
The 3rd patch adds a new framework to handle PHYs in a generic manner. The idea
is to move the phy initialization out of the b
All the clocks which has to be enabled has to be done in
enable_basic_clocks(), so moving enable sata clock to common
clocks enable function.
Signed-off-by: Mugunthan V N
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
---
arch/arm/mach-omap2/omap5/hw_data.c | 12
arch/ar
Those tests check:
- the ability for a phy-user to get a phy device a reference in the
device-tree
- the ability to perform operations on the phy (init,deinit,on,off)
- the behavior of the uclass when optional operations are not implemented
Signed-off-by: Jean-Jacques Hiblot
---
arch/sandbox/d
The PHY framework provides a set of APIs to control a PHY. This API is
derived from the linux version of the generic PHY framework.
Currently the API supports init(), deinit(), power_on, power_off() and
reset(). The framework provides a way to get a reference to a phy from the
device-tree.
Signed-
Implement a sata driver for Synopsys DWC sata device based on
U-boot driver model.
Signed-off-by: Mugunthan V N
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
---
drivers/block/Kconfig| 10 +
drivers/block/Makefile | 1 +
drivers/block/dwc_ahci.
When CONFIG_DM_SCSI is defined, the SATA initialization will be implemented
in the scsi-uclass driver.
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
---
arch/arm/mach-omap2/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-oma
We might want to get information about the scsi device without initializing the
partition.
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
---
common/scsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/common/scsi.c b/common/scsi.c
in
Enable disk driver model for dra7xx_evm as dwc_ahci supports
driver model. As a consequence we must also enable CONFIG_BLK and
CONFIG_DM_USB.
Signed-off-by: Mugunthan V N
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
---
configs/dra7xx_evm_defconfig| 12 +++-
configs/dra
With DM_SCSI enabled, blk_create_devicef() is called with blkz = 0, leading
to a divide-by-0 exception.
scsi_detect_dev() can be used to get the required parameters (block size
and number of blocks) from the drive before calling blk_create_devicef().
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by
This is a cosmetic change. target and LUN have kind of the same role in
this function. One of them was passed as a parameter and the other was
embedded in a structure. For consistency, pass both of them as parameters.
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
Reviewed-by: Simon Gl
This is needed to probe devices under that bus such as the SATA PHY.
Signed-off-by: Jean-Jacques Hiblot
---
arch/arm/dts/omap5-u-boot.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/omap5-u-boot.dtsi b/arch/arm/dts/omap5-u-boot.dtsi
index 6305f57..9247314 100644
--- a/a
This phy is found on omap platforms with sata capabilities.
Except for the part related to the DM and the PHY framework, the code is
basically a copy paste from arch/arm/mach-omap2/pipe3-phy.c
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
---
drivers/phy/Kco
On 14/04/2017 12:36, Simon Glass wrote:
Hi Jean-Jacques,
On 13 April 2017 at 08:17, Jean-Jacques Hiblot wrote:
On 09/04/2017 21:27, Simon Glass wrote:
Hi,
On 7 April 2017 at 05:42, Jean-Jacques Hiblot wrote:
The PHY framework provides a set of APIs to control a PHY. This API is
derived
On 04/14/2017 12:49 PM, Jaehoon Chung wrote:
> Hi Heinrich,
>
> On 04/14/2017 07:26 PM, Heinrich Schuchardt wrote:
>> This patch series is a resubmission of the v6 patch series
>> https://lists.denx.de/pipermail/u-boot/2017-February/281941.html
>> by Heiner Kallweit.
>>
>> Patch 1 updates the devi
Hi all,
This is the VERSION 3 of the series. Sorry for the confusion, I messed
up while preparing the patches.
Jean-Jacques
On 14/04/2017 13:07, Jean-Jacques Hiblot wrote:
This series adds support for SATA using the driver model on omap platforms.
It is based on the work of Mugunthan V N
Hi Heiner,
On 04/14/2017 07:50 PM, Heiner Kallweit wrote:
> Am 14.04.2017 um 12:26 schrieb Heinrich Schuchardt:
>> This patch series is a resubmission of the v6 patch series
>> https://lists.denx.de/pipermail/u-boot/2017-February/281941.html
>> by Heiner Kallweit.
>>
> A updated version of this se
To enable booting from MMC the MMC devices 0 and 1 are added to the
BOOT_TARGET_DEVICES.
Signed-off-by: Heinrich Schuchardt
---
This is a resubmission of
https://lists.denx.de/pipermail/u-boot/2017-April/287315.html
where this patch was part of patch series which was no longer applicable.
---
in
The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9:
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
(2017-04-11 17:54:31 +0300)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git master
for you to fetch changes up to 09397d99
On 04/13/2017 04:30 PM, Dalon Westergreen wrote:
> This series adds support to the common socfpga header for distro boot and
> moves
> the DE0/1, Socrates, C5/A5 SoCDK, and SoCKIT kits to use the common
> environment.
>
> Where available, the default devicetree is set to the devicetree for the b
The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9:
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
(2017-04-11 17:54:31 +0300)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git master
for you to fetch changes up to ca717a97ea65
A feature rich Kernel for Linux needs more than 8 MiB.
Hence enlarge CONFIG_SYS_BOOTM_LEN to 64 MiB for the Odroid C2.
As the Odroid C2 has has 2 GiB of RAM this poses no problem.
Signed-off-by: Heinrich Schuchardt
---
include/configs/meson-gxbb-common.h | 2 ++
1 file changed, 2 insertions(+)
On 04/10/2017 09:23 PM, yuiko.osh...@microchip.com wrote:
> From: Yuiko Oshino
>
> Add support for Microchip LAN7500, LAN7800 and 7850, USB to 10/100/1000
> Ethernet Controllers
>
> Signed-off-by: Yuiko Oshino
> Cc: Marek Vasut
Hi!
mostly nit-picking below, thanks for the hard work!
> +/*
Hi Stefan,
On Wed, 12 Apr 2017 10:53:01 -0700
Stefan Agner ste...@agner.ch wrote:
> On 2017-04-12 09:14, Stefano Babic wrote:
> > Hi Stefan,
> >
> > On 11/04/2017 07:42, Sanchayan Maity wrote:
> >> From: Stefan Agner
> >>
> >
> > The series is assigned to Anatolji, that the reason I do not
Am 14.04.2017 um 10:24 schrieb Heiner Kallweit:
> In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
> was assigned dev number 1 (0 is the SD slot). So on uboot prompt
U-Boot
> we had to manually switch the mmc device first. Therefore change the
> device number assignment.
Ob
On Tue, 11 Apr 2017 11:12:08 +0530
Sanchayan Maity maitysancha...@gmail.com wrote:
...
> Sanchayan Maity (1):
> Convert CONFIG_FSL_DCU_FB to Kconfig
>
> Stefan Agner (5):
> video: fsl_dcu_fb: fix framebuffer to the end of memory
> video: fsl_dcu_fb: Enable pixel clock after initialization
>
Am 14.04.2017 um 10:26 schrieb Heiner Kallweit:
> Support storing uboot environment in eMMC.
>
> Signed-off-by: Heiner Kallweit
> ---
> include/configs/meson-gxbb-common.h | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/include/configs/meson-gxbb-common.h
> b/includ
On Tue, 11 Apr 2017 16:33:30 +0800
Songjun Wu songjun...@microchip.com wrote:
...
> drivers/video/Kconfig| 6 +
> drivers/video/atmel_hlcdfb.c | 482
> ---
> 2 files changed, 417 insertions(+), 71 deletions(-)
applied to u-boot-video/master. Tha
Am 14.04.2017 um 13:46 schrieb Heinrich Schuchardt:
> To enable booting from MMC the MMC devices 0 and 1 are added to the
from eMMC
> BOOT_TARGET_DEVICES.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> This is a resubmission of
> https://lists.denx.de/pipermail/u-boot/2017-April/287315.html
> w
On Tue, 11 Apr 2017 16:33:31 +0800
Songjun Wu songjun...@microchip.com wrote:
...
> doc/device-tree-bindings/video/atme-hlcdc.txt | 42
> +++
> 1 file changed, 42 insertions(+)
> create mode 100644 doc/device-tree-bindings/video/atme-hlcdc.txt
applied to u-boot-video/ma
On 04/14/2017 03:42 PM, Andreas Färber wrote:
> Am 14.04.2017 um 13:46 schrieb Heinrich Schuchardt:
>> To enable booting from MMC the MMC devices 0 and 1 are added to the
>
> from eMMC
>
>> BOOT_TARGET_DEVICES.
>>
>> Signed-off-by: Heinrich Schuchardt
>> ---
>> This is a resubmission of
>> https
Am 14.04.2017 um 15:50 schrieb Heinrich Schuchardt:
> On 04/14/2017 03:42 PM, Andreas Färber wrote:
>> Am 14.04.2017 um 13:46 schrieb Heinrich Schuchardt:
>>> To enable booting from MMC the MMC devices 0 and 1 are added to the
>>
>> from eMMC
Sorry, was getting confused with the multiple submissio
On 03/14/2017 04:28 PM, Sylvain Lemieux wrote:
> From: Liam Beguin
>
> Add DM support for i2c functions.
>
> Signed-off-by: Liam Beguin
> Signed-off-by: Sylvain Lemieux
> ---
> Note:
> * This patch is require as part of the DM support of the LPC32xx I2C driver.
> All I2C drivers should be co
On 04/11/2017 03:23 AM, Troy Kisky wrote:
> This fixes a regression caused by
>
> commit 07b2b78ce4bc8ae25e066c65245eaf58c0d9a67c
> dm: usb: Convert USB storage to use driver-model for block devs
>
> which caused part_init to be called when it was not previously.
> Without this patch, the fol
On Mon, 10 Apr 2017 10:02:20 +0800
Eric Gao eric@rock-chips.com wrote:
...
> drivers/video/console_normal.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
applied to u-boot-video/master. Thanks!
--
Anatolij
___
U-Boot mailing list
U-Boot@
On 04/14/2017 03:55 PM, Andreas Färber wrote:
> Am 14.04.2017 um 15:50 schrieb Heinrich Schuchardt:
>> On 04/14/2017 03:42 PM, Andreas Färber wrote:
>>> Am 14.04.2017 um 13:46 schrieb Heinrich Schuchardt:
To enable booting from MMC the MMC devices 0 and 1 are added to the
>>>
>>> from eMMC
>
To enable automatic booting from SD card or eMMC the MMC devices 0 and 1
are added to the BOOT_TARGET_DEVICES.
Booting from SD card, eMMC, and DHCP are tried in sequence.
A missing or failing device is gracefully handled.
Cc: Andreas Färber
Signed-off-by: Heinrich Schuchardt
---
v2:
Enhance c
Am 14.04.2017 um 16:33 schrieb Heinrich Schuchardt:
> To enable automatic booting from SD card or eMMC the MMC devices 0 and 1
> are added to the BOOT_TARGET_DEVICES.
>
> Booting from SD card, eMMC, and DHCP are tried in sequence.
> A missing or failing device is gracefully handled.
>
> Cc: Andre
The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9:
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
(2017-04-11 17:54:31 +0300)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git master
for you to fetch changes up to 1e5eca7d4225
On 03/24/2017 01:56 PM, Marek Vasut wrote:
> On 03/24/2017 12:08 PM, Alexey Brodkin wrote:
>> Hi Marek,
>>
>> On Sun, 2017-03-05 at 02:09 +0100, Marek Vasut wrote:
>>> On 03/03/2017 02:22 PM, Alexey Brodkin wrote:
Hi Marek,
On Fri, 2017-03-03 at 00:57 +0100, Marek Vasut wrote:
>
When writing out some of our results we may now have UTF-8 characters
in there as well. Translate these to latin-1 and ignore any errors (as
this is for diagnostic and given the githash anything else can be
reconstructed by the user.
Cc: Simon Glass
Signed-off-by: Tom Rini
---
tools/buildman/b
Am 14.04.2017 um 15:40 schrieb Andreas Färber:
> Am 14.04.2017 um 10:26 schrieb Heiner Kallweit:
>> Support storing uboot environment in eMMC.
>>
>> Signed-off-by: Heiner Kallweit
>> ---
>> include/configs/meson-gxbb-common.h | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff
Am 14.04.2017 um 15:39 schrieb Andreas Färber:
> Am 14.04.2017 um 10:24 schrieb Heiner Kallweit:
>> In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
>> was assigned dev number 1 (0 is the SD slot). So on uboot prompt
>
> U-Boot
>
>> we had to manually switch the mmc device f
rockchip: video: Add mipi display support for rk3399
This serials patches add mipi dsi support for rk3399. Except the basic mipi
driver, we need also enable pmic rk808 for lcd power and enable i2c for rk808
communication. what's more, the needed clk and pwm for backlight is init in
spl stage, make
Add mipi dsi driver for rk chip. To enable this you need to enable DM, DM_VIDEO
DM_ROCKCHIP_VIDEO, DISPLAY_MIPI in menuconfig. And enable rk808 and it's i2c.
Signed-off-by: Eric Gao
---
arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 1 +
arch/arm/include/asm/arch-rockchip/grf_rk3399.h |
Add dts config for mipi display, include vop, mipi controller, panel,
backlight.And Enable rk808 for lcd_3v3 in another patch.
Signed-off-by: Eric Gao
---
arch/arm/dts/rk3399-evb.dts | 84 +
arch/arm/dts/rk3399.dtsi| 72 +++
Enable mipi dsi by default for rk3399-evb board
Signed-off-by: Eric Gao
---
configs/evb-rk3399_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index aac6d2d..f41cbf9 100644
--- a/configs/evb-rk3399_defconfig
+++ b/c
On 14 April 2017 at 08:58, Tom Rini wrote:
> When writing out some of our results we may now have UTF-8 characters
> in there as well. Translate these to latin-1 and ignore any errors (as
> this is for diagnostic and given the githash anything else can be
> reconstructed by the user.
>
> Cc: Simo
Currently $fdtfile is constructed from CONFIG_DEFAULT_TREE, containing
the filename. However on arm64 that file is located in an allwinner
subdirectory.
To avoid the need for users/distros symlinking the .dtb files, prepend
the vendor directory for ARM64.
This aligns Pine64 with other boards such
Hi Marek,
On Fri, 2017-04-14 at 16:44 +0200, Marek Vasut wrote:
> On 03/24/2017 01:56 PM, Marek Vasut wrote:
> >
> Even better, this patch breaks powerpc board lwmon5, so dropped.
Are you sure the problem is in my patch?
Maybe this PPC board just needs to UNdefine
CONFIG_EHCI_DESC_BIG_ENDIAN or
Hi,
Am 14.04.2017 um 14:17 schrieb Heinrich Schuchardt:
> A feature rich Kernel for Linux needs more than 8 MiB.
"Linux kernel"?
> Hence enlarge CONFIG_SYS_BOOTM_LEN to 64 MiB for the Odroid C2.
> As the Odroid C2 has has 2 GiB of RAM this poses no problem.
Duplicate "has", and "Odroid-C2".
Yo
0x1000 is the start of a 2 MiB area used by
ARM Trusted Firmware (BL31).
So we should not load the ramdisk here.
The legacy Ubuntu image comes with the following line in boot.ini:
setenv initrd_loadaddr "0x1300"
See
http://odroid.in/ubuntu_16.04lts/ubuntu64-16.04-minimal-odroid-c2-201608
Am 13.04.2017 um 04:42 schrieb Kyle Edwards:
> This fixes an issue with the saveenv command causing U-Boot to no
> longer work on the QEMU Mips pseudoboard. Because the offset of the
> environment was being determined by CONFIG_SYS_MONITOR_LEN, and this
> value was less than the actual size of U-
1 - 100 of 141 matches
Mail list logo
