In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
was assigned dev number 1 (0 is the SD slot). So on uboot prompt
we had to manually switch the mmc device first. Therefore change the
device number assignment.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
arch/arm/dts/meson-gxbb-odroidc2.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts
b/arch/arm/dts/meson-gxbb-odroidc2.dts
index c737183..5ec67ca 100644
--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
+++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -53,6 +53,8 @@
aliases {
serial0 = &uart_AO;
+ mmc0 = &sd_emmc_c;
+ mmc1 = &sd_emmc_b;
};
chosen {
--
2.12.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
