Am 14.04.2017 um 15:39 schrieb Andreas Färber:
> Am 14.04.2017 um 10:24 schrieb Heiner Kallweit:
>> In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
>> was assigned dev number 1 (0 is the SD slot). So on uboot prompt
> 
> U-Boot
> 
>> we had to manually switch the mmc device first. Therefore change the
>> device number assignment.
> 
> Objection, this differs from Linux and will be overwritten on next dts sync.
> 
That's true .. From my perspective best solution would be if U-Boot wouldn't
assign a device id at all to a SD slot w/o card inserted.
However it seems like the current mmc core doesn't support this.

Rgds, Heiner

> Regards,
> Andreas
> 
>>
>> Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
>> ---
>>  arch/arm/dts/meson-gxbb-odroidc2.dts | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts 
>> b/arch/arm/dts/meson-gxbb-odroidc2.dts
>> index c737183..5ec67ca 100644
>> --- a/arch/arm/dts/meson-gxbb-odroidc2.dts
>> +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
>> @@ -53,6 +53,8 @@
>>  
>>      aliases {
>>              serial0 = &uart_AO;
>> +            mmc0 = &sd_emmc_c;
>> +            mmc1 = &sd_emmc_b;
>>      };
>>  
>>      chosen {
>>
> 
> 

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to