On 28.7.2016 04:24, Simon Glass wrote:
> Hi Michal,
>
> On 24 July 2016 at 20:07, Simon Glass wrote:
>> On 15 July 2016 at 01:35, Michal Simek wrote:
>>> Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
>>> U-Boot shouldn't update memory setup in DTB file.
>>> One example
Hi Ziyuan,
On 07/28/2016 11:25 AM, Ziyuan Xu wrote:
> The former implement, dw_mmc will push and pop the redundant data to
> FIFO, we should transfer it according to the real size.
Looks good to me.
Acked-by: Jaehoon Chung
Best Regards,
Jaehoon Chung
>
> Signed-off-by: Ziyuan Xu
> ---
>
>
Hi Ziyuan,
On 07/28/2016 11:25 AM, Ziyuan Xu wrote:
> This patch fixes data starvation by host timeout(HTO) error interrupt
> which occurred under FIFO mode transfer on rk3036 board.
>
> The former implement, the actual bytes were transmitted may be less than
> should be. The size will still subt
Masahiro-san
>#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) #error Must call
>Cyrus CONFIG with a specific CPU enabled.
>#endif
>diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index
>0d51aeb..a11b692 100644
>--- a/include/configs/dra7xx_evm.h
>+++ b/incl
Masahiro-san
>>#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) #error Must
>>call Cyrus CONFIG with a specific CPU enabled.
>>#endif
>>diff --git a/include/configs/dra7xx_evm.h
>>b/include/configs/dra7xx_evm.h index 0d51aeb..a11b692 100644
>>--- a/include/configs/dra7xx_evm.h
>>+++
Hi York,
> -Original Message-
> From: york sun
> Sent: Wednesday, July 27, 2016 10:55 PM
> To: Qianyu Gong ; u-boot@lists.denx.de; Simon Glass
>
> Cc: Shaohui Xie ; Zhiqiang Hou ;
> Wenbin Song ; Yao Yuan ; Mingkai
> Hu ; Prabhakar Kushwaha
>
> Subject: Re: [PATCH 2/2] config.h: clean un
Hi Yangbo,
On 07/28/2016 11:45 AM, Yangbo Lu wrote:
> Hi Ziyuan and Jaehoon,
>
>
>> -Original Message-
>> From: Ziyuan Xu [mailto:xzy...@rock-chips.com]
>> Sent: Wednesday, July 27, 2016 9:37 PM
>> To: Jaehoon Chung; Yangbo Lu; u-boot@lists.denx.de; Tom Rini
>> Cc: Pantelis Antoniou
>> S
> -Original Message-
> From: york sun
> Sent: Wednesday, July 27, 2016 10:48 PM
> To: Yangbo Lu; u-boot@lists.denx.de
> Subject: Re: [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620
>
> On 07/27/2016 12:10 AM, Yangbo Lu wrote:
> >> -Original Message-
> >> From: york sun
>
On 22/07/2016 20:21, Fabio Estevam wrote:
> There is no need for introducing MX7_SEC, as there is the
> CONFIG_ARMV7_BOOT_SEC_DEFAULT option for this purpose.
>
> Switch to CONFIG_ARMV7_BOOT_SEC_DEFAULT and get rid of
> MX7_SEC.
>
> Tested by booting a 4.1.15 NXP kernel with mx7dsabresd_secure_de
Hi Akshay,
this looks good to me. I apply it, and I let you think about an upgrade
to SPL for this board.
Best regards,
Stefano Babic
On 21/07/2016 16:29, Akshay Bhat wrote:
> Add support for Advantech DMS-BA16 board. The board is based on Advantech
> BA16 module which has a i.MX6D processor. Th
For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
booting linux kernel, which occurred on rk3288-base development board
such as evb-rk3288, rock2-rk3288. And something output via console like:
=> boo
On 27/07/2016 16:07, Soeren Moch wrote:
> HDMI output must be enabled very early to also enable the pre-console buffer
>
> Signed-off-by: Soeren Moch
> ---
> Cc: Stefano Babic
> Cc: u-boot@lists.denx.de
> ---
> include/configs/tbs2910.h | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
On 27/07/2016 16:07, Soeren Moch wrote:
> 'usb start' is much faster now, so always enable usb keyboard
>
> Signed-off-by: Soeren Moch
> ---
> Cc: Stefano Babic
> Cc: u-boot@lists.denx.de
> ---
> include/configs/tbs2910.h | 13 ++---
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
On 15/07/2016 16:14, Tim Harvey wrote:
> The Ventana U-Boot target supports a family of IMX6 based boards (6 boards
> currently) which have a variety of features. Make RS232 and the number of
> digital IO's baseboard specific.
>
> Tim Harvey (4):
> imx: ventana: make RS232 enable board specific
On 17/06/2016 15:20, Tim Harvey wrote:
> The IMX6 PCIe host controller does not have a proper reset and as such there
> are several issues that can arise if PCI is enabled in the bootloader follwed
> by Linux trying to re-configure LTSSM and/or toggling PERST# to the devices.
>
> For now, the best
On 17/06/2016 15:20, Tim Harvey wrote:
> Signed-off-by: Tim Harvey
> ---
> drivers/pci/pci.c | 4
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 4b73a0f..6b36c18 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -458,6 +458,10
On 17/06/2016 15:10, Tim Harvey wrote:
> The GW16082 mini-PCI expansion mezzanine uses a TI XIO2001 PCIe-to-PCI
> bridge with legacy INTA/B/C/D interrupts. These interrupts are assigned
> in the reverse order according to the PCI spec.
>
> If the TI bridge is found on the Ventana PCI bus, add devi
On 17/06/2016 15:10, Tim Harvey wrote:
> Ventana boards with a PCI Marvell Sky2 GigE MAC require the MAC address to
> be placed in a DT node in order for the mainline linux driver to obtain it.
>
> Signed-off-by: Tim Harvey
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 29/06/2016 17:58, Tim Harvey wrote:
> 3b1f681131149b5f62602f582a7e60b0185a2a49 caused a regression that removes
> board info dispaly for Gateworks Ventana boards because it made the invalid
> assumption that CONFIG_DISPLAY_BOARDINFO_LATE was the same thing as
> CONFIG_DISPLAY_BOARDINFO.
>
> Ven
On 15/07/2016 16:16, Tim Harvey wrote:
> Tim Harvey (2):
> imx: ventana: refactor board-specific dt fixups (no functional change)
> imx: ventana: add dt fixup for watchdog external reset
>
> board/gateworks/gw_ventana/gw_ventana.c | 192
>
> 1 file changed, 1
Hi Simon,
Am Mittwoch, 27. Juli 2016, 21:42:47 schrieb Simon Glass:
> On 22 July 2016 at 15:51, Heiko Stuebner wrote:
> > Second version. Simon already applied the cleanup patches from my
> > first version. I've tried to address Simons comments and hopefully
> > haven't overlooked any.
> >
> > S
Hi Tim,
On 15/07/2016 16:17, Tim Harvey wrote:
> Signed-off-by: Tim Harvey
> ---
> include/configs/gw_ventana.h | 7 ---
> tools/logos/gateworks.bmp| Bin 0 -> 56202 bytes
> 2 files changed, 4 insertions(+), 3 deletions(-)
> create mode 100644 tools/logos/gateworks.bmp
>
> diff --git
On 22/07/2016 14:11, Breno Lima wrote:
> It's not necessary to implement the is_mx6q function, there is a macro in
> sys_proto.h already implemented.
>
> Signed-off-by: Breno Lima
> ---
> board/solidrun/mx6cuboxi/mx6cuboxi.c | 12 ++--
> 1 file changed, 2 insertions(+), 10 deletions(-)
>
On 22/07/2016 14:11, Breno Lima wrote:
> It's not necessary to use the is_cpu_type function, there is a macro in
> sys_proto.h already implemented.
>
> Signed-off-by: Breno Lima
> ---
> board/wandboard/wandboard.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/boar
On 22/07/2016 14:12, Breno Lima wrote:
> It's not necessary to implement the is_mx6q function, there is a macro in
> sys_proto.h already implemented.
>
> Signed-off-by: Breno Lima
> ---
> board/congatec/cgtqmx6eval/cgtqmx6eval.c | 14 +++---
> 1 file changed, 3 insertions(+), 11 deletion
On 07/28/2016 12:13 PM, Ziyuan Xu wrote:
For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
booting linux kernel, which occurred on rk3288-base development board
such as evb-rk3288, rock2-rk3288. And
Hi Stefan,
sorry for delay:
On 21/07/2016 06:27, Stefan Agner wrote:
> From: Stefan Agner
>
> This commit adds support for the Toradex Computer on Modules
> Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence
> can be easily supported by one board. The board code detects RAM
> siz
On 22/07/2016 20:29, Breno Lima wrote:
> Currently it's recommended to move some configuration options to the
> defconfig file.
>
> Move some USB related options to the defconfig file.
>
> Signed-off-by: Breno Lima
> ---
> configs/warp7_defconfig | 6 ++
> include/configs/warp7.h | 9 --
On 23/07/2016 18:23, Fabio Estevam wrote:
> From: Fabio Estevam
>
> imx_ddr_size() can be used to calculate the DDR size in runtime.
>
> By using this function we no longer need to define PHYS_SDRAM_SIZE.
>
> Signed-off-by: Fabio Estevam
> ---
> board/warp/warp.c | 2 +-
> include/config
On 23/07/2016 18:23, Fabio Estevam wrote:
> From: Fabio Estevam
>
> imx_ddr_size() can be used to calculate the DDR size in runtime.
>
> By using this function we no longer need to define PHYS_SDRAM_SIZE.
>
> Cc: Heiko Schocher
> Signed-off-by: Fabio Estevam
> ---
> board/aristainetos/arista
On 23/07/2016 18:23, Fabio Estevam wrote:
> From: Fabio Estevam
>
> imx_ddr_size() can be used to calculate the DDR size in runtime.
>
> By using this function we no longer need to define PHYS_SDRAM_SIZE.
>
> Cc: Martin Donnelly
> Signed-off-by: Fabio Estevam
> ---
> board/ge/bx50v3/bx50v3.c
On 23/07/2016 18:23, Fabio Estevam wrote:
> From: Fabio Estevam
>
> novena uses the imx_ddr_size() function to calculate the DDR size in
> runtime, so there is no need to define PHYS_SDRAM_SIZE.
>
> Remove the unneeded definition.
>
> Cc: Marek Vasut
> Signed-off-by: Fabio Estevam
> ---
> in
On 23/07/2016 18:23, Fabio Estevam wrote:
> From: Fabio Estevam
>
> cgtqmx6eval uses the imx_ddr_size() function to calculate the DDR size in
> runtime, so there is no need to define PHYS_SDRAM_SIZE.
>
> Remove the unneeded definition.
>
> Cc: Otavio Salvador
> Signed-off-by: Fabio Estevam
>
On 25/07/2016 18:45, Diego Dorta wrote:
> Remove unused define constant.
>
> Signed-off-by: Diego Dorta
> ---
> board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
> b/board/freescale/mx6
On 26/07/2016 19:35, Stefan Agner wrote:
> Hi Max,
>
> On 2016-07-26 02:31, Max Krummenacher wrote:
>> Hi Stefan
>>
>>> From: Stefan Agner [mailto:ste...@agner.ch]
>>> Sent: Dienstag, 26. Juli 2016 07:58
>>>
>>> Use CONFIG_TIMER_CLK_FREQ to let the non-secure init code initialize the
>>> generic t
On 27/07/2016 02:08, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Add an entry for the mx7dsabresd_secure_defconfig target.
>
> Signed-off-by: Fabio Estevam
> ---
> board/freescale/mx7dsabresd/MAINTAINERS | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/board/freescale/mx7dsabresd/M
Hi Fabio,
On 27/07/2016 02:27, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Pass the board/freescale/*mx*/ path as files maintained by Stefano
> Babic.
>
> While this is not ideal and does not cover all the i.MX board cases,
> it gives at least a better hint for the /scripts/get_maintainer.pl
Hi,
On Thu, Jul 28, 2016 at 6:13 PM, Ziyuan Xu wrote:
> For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
>
> This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
> booting linux kernel, which occurred on rk3288-base development board
> such as evb-rk3
On Wed, Jul 27, 2016 at 08:24:17PM -0600, Simon Glass wrote:
> Hi Tom,
>
> Here is a new power domain uclass, the rest of the MMC conversion
> (moving over zynq and socfpga) and a few other dm improvements.
>
> The following changes since commit 0b6699ad8ea95803d7ce40d1dc1caea902a6d22c:
>
> M
Masahiro-san
>>>#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) #error Must
>>>call Cyrus CONFIG with a specific CPU enabled.
>>>#endif
>>>diff --git a/include/configs/dra7xx_evm.h
>>>b/include/configs/dra7xx_evm.h index 0d51aeb..a11b692 100644
>>>--- a/include/configs/dra7xx_evm.h
On 07/27/2016 08:00 PM, york sun wrote:
> On 07/21/2016 04:45 AM, Marek Vasut wrote:
>> On 07/21/2016 10:02 AM, Rajesh Bhagat wrote:
>>> Hi All,
>>>
>>> Any Comments?
>>
>> York, please check this.
>
> Passed compiling tests on powerpc and arm platforms.
And the patches are OK ?
> York
>
>>
>>>
2016-07-28 17:18 GMT+09:00 B, Ravi :
> Masahiro-san
>
>>#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) #error Must
>>call Cyrus CONFIG with a specific CPU enabled.
>>#endif
>>diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
>>index 0d51aeb..a11b692 100644
>>
Hi,
On 2016年07月28日 19:03, Chen-Yu Tsai wrote:
Hi,
On Thu, Jul 28, 2016 at 6:13 PM, Ziyuan Xu wrote:
For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
booting linux kernel, which occurred on rk32
Hi Akshay,
On 28/07/2016 12:12, Stefano Babic wrote:
> Hi Akshay,
>
> this looks good to me. I apply it, and I let you think about an upgrade
> to SPL for this board.
>
The patch breaks most of i.MX6 boards because it redefines IMX_CONFIG.
In fact:
>> source "board/ge/bx50v3/Kconfig"
>> +sou
Hi Tom,
please pull from u-boot-imx (master), thanks!
The following changes since commit 19ce924ff914f315dc2fdf79f357825c513aed6e:
Prepare v2016.07 (2016-07-11 15:01:01 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up
AM437x SK and AM437x IDK EVMs have 64MB flash, therefore enable
CONFIG_SPI_FLASH_BAR to access flash regions above 16MB.
Signed-off-by: Vignesh R
---
configs/am43xx_evm_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index
Hi Alexander,
On 2016年07月28日 18:39, Alexander Graf wrote:
On 07/28/2016 12:13 PM, Ziyuan Xu wrote:
For ARMv7-A architecture, the valid ISB instruction is asm
volatile("isb").
This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
booting linux kernel, which occurred on rk3288
Traditionally the DFU support is available only
as part 2nd stage boot loader(u-boot) and DFU
is not supported in SPL.
The SPL-DFU feature is useful for boards which
does not have MMC/SD, ethernet boot mechanism
to boot the board and only has USB inteface.
This patch add DFU support in SPL with R
Traditionally the DFU support is available only
as part 2nd stage boot loader(u-boot) and DFU
is not supported in SPL.
The SPL-DFU feature is useful for boards which
does not have MMC/SD, ethernet boot mechanism
to boot the board and only has USB inteface.
This patch add DFU support in SPL with R
Adding support functions to run dfu spl commands.
Signed-off-by: Ravi Babu
Reviewed-by: Tom Rini
---
common/spl/Makefile |1 +
common/spl/spl_dfu.c | 57 ++
include/spl.h|8 +++
3 files changed, 66 insertions(+)
create mode
The cmd_dfu functionality is been used by both SPL and
u-boot, saperating the core dfu functionality moving
it to common/dfu.c.
Signed-off-by: Ravi Babu
Reviewed-by: Tom Rini
---
cmd/dfu.c | 61 ++
common/Makefile |2 ++
common/dfu.c| 87 +++
This patch enables the SPL-DFU support for
dra7x platform.
Signed-off-by: Ravi Babu
Reviewed-by: Tom Rini
---
include/configs/dra7xx_evm.h | 20 +++-
include/configs/ti_omap5_common.h |2 --
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/include/confi
This patch enables the DFU boot mode support
for dra7x platform.
Signed-off-by: Ravi Babu
Reviewed-by: Tom Rini
---
arch/arm/cpu/armv7/omap-common/boot-common.c |5 +
arch/arm/include/asm/arch-omap5/spl.h|2 +-
common/spl/spl.c | 10 +-
On 07/27/2016 04:26 PM, Paul Burton wrote:
> This patch introduces support for building U-Boot to run on the MIPS
> Boston development board. This is a board built around an FPGA & an
> Intel EG20T Platform Controller Hub, used largely as part of the
> development of new CPUs and their software sup
On 07/27/2016 05:37 AM, Keerthy wrote:
>
>
> On Wednesday 27 July 2016 09:05 AM, Keerthy wrote:
>> On SoCs like DRA7, OMAP5 one cannot enable hypervisor mode directly
>> from the
>> u-boot because the ROM code puts the chip to supervisor mode after it
>> jumps to boot loader.
>>
>> Patch 1: Intro
Masihiro-san
>See, the following hunk
>> diff --git a/arch/arm/cpu/armv7/omap5/Kconfig
>> b/arch/arm/cpu/armv7/omap5/Kconfig
>> index 4fb5ef9..a8600b1 100644
>> --- a/arch/arm/cpu/armv7/omap5/Kconfig
>> +++ b/arch/arm/cpu/armv7/omap5/Kconfig
>> @@ -13,6 +13,7 @@ config TARGET_OMAP5_UEVM config
Ziyuan,
I tested this patch and it works for me with the current u-boot.git/master.
Re the EFI support. The problem was that when you compile in efi_runtime.c
it breaks booting the kernel. Probably rubbing the caching system the wrong
way. With this patch we are able to boot the kernel with the E
Hi Marek,
On Thursday 28 July 2016 05:38 PM, Marek Vasut wrote:
On 07/27/2016 05:37 AM, Keerthy wrote:
On Wednesday 27 July 2016 09:05 AM, Keerthy wrote:
On SoCs like DRA7, OMAP5 one cannot enable hypervisor mode directly
from the
u-boot because the ROM code puts the chip to supervisor mode
Hello,
I wonder whether it is possible to dynamically enable/disable a command.
Since u-boot does not provide any secure authentication method, it is
dangerous to keep some commands available to a potential hacker. E.g.
the "fuse" command. On the other hand, I need these commands during the
ma
Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
U-Boot shouldn't update memory setup in DTB file.
One example of usage of this option is to boot OS with different memory
setup than U-Boot use.
Signed-off-by: Michal Simek
---
Changes in v3:
- Fix MIPS macro
Changes in v2
Hello,
I would like to use netconsole instead of serial console. It works fine
if the Ethernet cable is plugged in the device. The problem is that it
hangs forever if the cable is unplugged, which can generally happen. Is
this a normal behavior or a bug? Any workaround?
(u-boot 2016.01, vf610t
On Thu, Jul 28, 2016 at 04:09:10AM +, B, Ravi wrote:
> Tom
>
> > On 27-Jul-2016, at 8:55 PM, Tom Rini wrote:
> >
> >> On Wed, Jul 27, 2016 at 02:04:24PM +, B, Ravi wrote:
[snip]
> diff --git a/common/command.c b/common/command.c index
> e5d9b9c..d1c049c 100644
> --- a/com
On 28 July 2016 at 08:06, Qianyu Gong wrote:
>
>
>> -Original Message-
>> From: york sun
>> Sent: Thursday, July 28, 2016 1:35 AM
>> To: Qianyu Gong ; u-boot@lists.denx.de; Prabhakar
>> Kushwaha ; Mingkai Hu
>> Cc: Shaohui Xie ; Zhiqiang Hou ;
>> Wenbin Song
>> Subject: Re: [PATCH 1/2] n
On 27 July 2016 at 17:40, Vignesh R wrote:
>
>
> On Wednesday 27 July 2016 12:05 PM, Jagan Teki wrote:
>> On 25 July 2016 at 15:45, Vignesh R wrote:
>>> According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, update
>>> the driver to use the same.
>>>
>>> Signed-off-by: Vignesh R
>>> ---
On 25 July 2016 at 19:16, Vignesh R wrote:
>
>
> On Monday 25 July 2016 07:08 PM, Tom Rini wrote:
>> On Mon, Jul 25, 2016 at 03:45:47PM +0530, Vignesh R wrote:
>>
>>> According to AM572x DM SPRS953A, QSPI max bus speed is 76.8MHz.
>>> Therefore update the spi-max-frequency value of QSPI node for D
On Thu, Jul 28, 2016 at 02:08:10PM +0200, Marek Vasut wrote:
> On 07/27/2016 05:37 AM, Keerthy wrote:
> >
> >
> > On Wednesday 27 July 2016 09:05 AM, Keerthy wrote:
> >> On SoCs like DRA7, OMAP5 one cannot enable hypervisor mode directly
> >> from the
> >> u-boot because the ROM code puts the chi
On Wed, Jul 27, 2016 at 09:05:35AM +0530, Keerthy wrote:
> On some of the SoCs one cannot enable hypervisor mode directly from the
> u-boot because the ROM code puts the chip to supervisor mode after it
> jumps to boot loader. Hence introduce a weak function which can be
> overridden based on the
On Wed, Jul 27, 2016 at 09:05:36AM +0530, Keerthy wrote:
> Override the switch_to_hypervisor function to switch cpu to hypervisor
> mode using the available ROM code hook early in the boot phase before
> the boot loader checks for HYP mode.
>
> Based on the work done by Jonathan Bergsagel jbergsa
Add an extra byte so that this data is not byteswapped.
Signed-off-by: Sandy Patterson
---
arch/arm/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/dts/rk3288-veyron.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/rk3288-rock2-square.dts
b/arch/arm/dt
On Thu, Jul 28, 2016 at 1:36 AM, Bin Meng wrote:
> On Thu, Jul 28, 2016 at 6:01 AM, George McCollister
> wrote:
>> Pad configuration for SERIRQ is not set to enable the SERIRQ function
>> on soft reset though strangely, it is on initial boot.
>>
>
> What does "soft reset" mean?
My apologies, thi
Hello
In the sdram_config.h files for the ARM SoC (Arria5 and Cyclone5):
- board/altera/cyclone5-socdk/qts/sdram_config.h
- board/altera/arria5-socdk/qts/sdram_config.h
There are 2 values for self-refresh exit and power-down exit DRAM timing:
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNE
Explicitly enable ILB_SERIRQ function 1 in
cfio_regs_pad_ilb_serirq_PCONF0.
Pad configuration for SERIRQ is not set to enable the SERIRQ function
after a reset though strangely, it is on initial boot.
Rebooting from Linux, reset command in u-boot and even pushing the reset
button on the developme
On 07/27/2016 07:09 PM, Jaehoon Chung wrote:
Hi Stephen,
On 07/28/2016 06:24 AM, Stephen Warren wrote:
From: Stephen Warren
Tegra186 supports the new standard clock and reset APIs. Older Tegra SoCs
still use custom APIs. Enhance the Tegra MMC driver so that it can operate
with either set of A
On 07/27/2016 07:57 PM, Qianyu Gong wrote:
> Hi York,
>
>> -Original Message-
>> From: york sun
>> Sent: Wednesday, July 27, 2016 10:55 PM
>> To: Qianyu Gong ; u-boot@lists.denx.de; Simon Glass
>>
>> Cc: Shaohui Xie ; Zhiqiang Hou ;
>> Wenbin Song ; Yao Yuan ; Mingkai
>> Hu ; Prabhakar Kus
Hi Vikas,
I was an holiday and am still catching up. Apart from that I'm still
working on this patchset and integrating the comments and API-changes.
What I'm currently missing is to setup the frequencies directly from
clk_stm32.c. When this is done, I'll send an update.
regards
Benjamin
On Thu
Hi Simon,
On Tue, Jul 12, 2016 at 10:02:43AM -0600, Simon Glass wrote:
> +Stephen
>
> Hi Benjamin,
>
> On 20 June 2016 at 12:26, Benjamin Tietz wrote:
> > From: Benjamin Tietz
> >
> > Currently, clocks can be enabled, only. To be feature-complete - and allow
> > a bit of power-saving in applic
Greetings,
I don't see U-Boot support for the TechNexion designed/built LS1021A-IoT.
I've got one on my desk and am still muddling through the
overly-complicated NXP BSP and I haven't found where they are building
U-Boot from yet or with what patchset.
Is this board supported by perhaps a config
On 27 July 2016 at 03:58, Hans de Goede wrote:
> There is a new Orange Pi PC *Plus* version available now,
> this is an extended version of the regular Orange Pi PC
> with sdio wifi and an eMMC.
>
> The upstream kernel devs have decided that they want a separate
> dts for the PC Plus rather then s
On 27 July 2016 at 23:55, Ian Campbell wrote:
> On Wed, 2016-07-27 at 18:10 +0200, Hans de Goede wrote:
>> With the recent bug fixes for the sun8i_emac driver all known issues
>> are resolved, so we can re-enable the driver.
>>
>> While at it, also enable the emac on the Orange Pi One.
>>
>> Cc: C
On 07/28/2016 10:42 AM, Tim Harvey wrote:
> Greetings,
>
> I don't see U-Boot support for the TechNexion designed/built
> LS1021A-IoT. I've got one on my desk and am still muddling through the
> overly-complicated NXP BSP and I haven't found where they are building
> U-Boot from yet or with what pa
Hi,
On 28-07-16 05:13, Chen-Yu Tsai wrote:
Hi,
On Thu, Jul 28, 2016 at 3:14 AM, Siarhei Siamashka
wrote:
Hello Hans,
On Wed, 27 Jul 2016 18:10:34 +0200
Hans de Goede wrote:
It seems that bytes 13-14 of the SID / bytes 1-2 from word 3 of the SID
are always 0 on H3 making it a poor candidat
Hi,
On 27-07-16 19:11, Amit Tomer wrote:
Hello,
index 7c088c3..877859c 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -32,7 +32,8 @@
#define CONFIG_TX_DESCR_NUM32
#define CONFIG_RX_DESCR_NUM32
-#define CONFIG_ETH_BUFSIZE 2024
+#define CONFIG_ETH_BUFSIZE
Hi,
On 28-07-16 19:58, Jagan Teki wrote:
On 27 July 2016 at 03:58, Hans de Goede wrote:
There is a new Orange Pi PC *Plus* version available now,
this is an extended version of the regular Orange Pi PC
with sdio wifi and an eMMC.
The upstream kernel devs have decided that they want a separate
On 29 July 2016 at 00:09, Hans de Goede wrote:
> Hi,
>
>
> On 28-07-16 19:58, Jagan Teki wrote:
>>
>> On 27 July 2016 at 03:58, Hans de Goede wrote:
>>>
>>> There is a new Orange Pi PC *Plus* version available now,
>>> this is an extended version of the regular Orange Pi PC
>>> with sdio wifi and
On 27 July 2016 at 13:58, Ian Campbell wrote:
> On Wed, 2016-07-27 at 00:28 +0200, Hans de Goede wrote:
>> There is a new Orange Pi PC *Plus* version available now,
>> this is an extended version of the regular Orange Pi PC
>> with sdio wifi and an eMMC.
>>
>> The upstream kernel devs have decided
On 07/28/2016 04:34 AM, Marek Vasut wrote:
> On 07/27/2016 08:00 PM, york sun wrote:
>> On 07/21/2016 04:45 AM, Marek Vasut wrote:
>>> On 07/21/2016 10:02 AM, Rajesh Bhagat wrote:
Hi All,
Any Comments?
>>>
>>> York, please check this.
>>
>> Passed compiling tests on powerpc and arm p
On Thu, Jul 28, 2016 at 3:37 AM, Stefano Babic wrote:
>
> Hi Tim,
>
> On 15/07/2016 16:17, Tim Harvey wrote:
> > Signed-off-by: Tim Harvey
> > ---
> > include/configs/gw_ventana.h | 7 ---
> > tools/logos/gateworks.bmp| Bin 0 -> 56202 bytes
> > 2 files changed, 4 insertions(+), 3 dele
On Thu, Jul 28, 2016 at 07:03:17PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Jul 28, 2016 at 6:13 PM, Ziyuan Xu wrote:
> > For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
> >
> > This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
> > booting lin
On Thu, Jul 28, 2016 at 06:13:26PM +0800, Ziyuan Xu wrote:
`
> For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
>
> This patch fixes the U-Boot was stuck in invalidate_dcache_all() before
> booting linux kernel, which occurred on rk3288-base development board
> such as e
Hi Tom,
On 2016年07月29日 06:15, Tom Rini wrote:
On Thu, Jul 28, 2016 at 07:03:17PM +0800, Chen-Yu Tsai wrote:
Hi,
On Thu, Jul 28, 2016 at 6:13 PM, Ziyuan Xu wrote:
For ARMv7-A architecture, the valid ISB instruction is asm volatile("isb").
This patch fixes the U-Boot was stuck in invalidate_d
From: Fabio Estevam
mx7dsabresd has two targets:
- mx7dsabresd_defconfig: boots in non-secure mode
- mx7dsabresd_secure_defconfig: boots in secure mode
Print the mode that is being used to help users to easily identify
which target is running on the board.
Signed-off-by: Fabio Estevam
---
bo
On Fri, Jul 29, 2016 at 07:34:09AM +0800, Ziyuan Xu wrote:
> Hi Tom,
>
> On 2016年07月29日 06:15, Tom Rini wrote:
> >On Thu, Jul 28, 2016 at 07:03:17PM +0800, Chen-Yu Tsai wrote:
> >>Hi,
> >>
> >>On Thu, Jul 28, 2016 at 6:13 PM, Ziyuan Xu wrote:
> >>>For ARMv7-A architecture, the valid ISB instructi
Add driver model support while retaining the existing legacy code.
This allows the driver to support boards that have converted to
driver model as well as those that have not.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v7:
- Move gpio_request_list_by_name() to _probe(),
Convert the driver to the driver model while retaining the existing
legacy code. This allows the driver to support boards that have
converted to driver model as well as those that have not.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
Reviewed-by: Jaehoon Chung
---
Changes in v9:
- Add
Hi Tom,
On 2016年07月29日 08:34, Tom Rini wrote:
On Fri, Jul 29, 2016 at 07:34:09AM +0800, Ziyuan Xu wrote:
Hi Tom,
On 2016年07月29日 06:15, Tom Rini wrote:
On Thu, Jul 28, 2016 at 07:03:17PM +0800, Chen-Yu Tsai wrote:
Hi,
On Thu, Jul 28, 2016 at 6:13 PM, Ziyuan Xu wrote:
For ARMv7-A architectu
Hello Vikas, hello Simon,
the new clk-API leaves me with a problem. Previously there was a
seperate way to access the clock-device itself (using clk_[gs]et_rate) and
the peripherals connected (clk_[gs]et_periph_rate). The former case now isn't
available no more. But the system clock in STM32 doesn
Hi Jagan,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: 2016年7月26日 14:21
> To: Wenyou Yang
> Cc: U-Boot Mailing List
> Subject: Re: [U-Boot] [PATCH v6] dm: at91: Add driver model support for the
> spi
> driver
>
> On 25 July 2016 at 15:27, Wenyou Yan
On Fri, Jul 29, 2016 at 09:06:29AM +0800, Ziyuan Xu wrote:
> Hi Tom,
>
> On 2016年07月29日 08:34, Tom Rini wrote:
> >On Fri, Jul 29, 2016 at 07:34:09AM +0800, Ziyuan Xu wrote:
> >>Hi Tom,
> >>
> >>On 2016年07月29日 06:15, Tom Rini wrote:
> >>>On Thu, Jul 28, 2016 at 07:03:17PM +0800, Chen-Yu Tsai wrote:
On 2016年07月29日 09:12, Tom Rini wrote:
On Fri, Jul 29, 2016 at 09:06:29AM +0800, Ziyuan Xu wrote:
Hi Tom,
On 2016年07月29日 08:34, Tom Rini wrote:
On Fri, Jul 29, 2016 at 07:34:09AM +0800, Ziyuan Xu wrote:
Hi Tom,
On 2016年07月29日 06:15, Tom Rini wrote:
On Thu, Jul 28, 2016 at 07:03:17PM +0800,
This patchset add basic driver like clock, grf, sysreset for rk3399,
and enable clock init in emmc driver.
This patchset has tested on rk3399 evb.
Changes in v2:
- include '_SHIFT_' in '_MASK' MACRO
- fix comment style
- use DIV_ROUND_UP instead of div_round_up
- use uclass_get_device_by_driver
1 - 100 of 121 matches
Mail list logo
