Traditionally the DFU support is available only
as part 2nd stage boot loader(u-boot) and DFU
is not supported in SPL.
The SPL-DFU feature is useful for boards which
does not have MMC/SD, ethernet boot mechanism
to boot the board and only has USB inteface.
This patch add DFU support in SPL with RAM
memory device support to load and execute u-boot.
And then leverage full functionality DFU in
u-boot to flash boot inital binary images to
factory or bare-metal boards to memory devices
like SPI, eMMC, MMC/SD card using USB interface.
This SPL-DFU support can be enabled through
Menuconfig->Boot Images->Enable SPL-DFU support
Signed-off-by: Ravi Babu <ravib...@ti.com>
Reviewed-by: Tom Rini <tr...@konsulko.com>
---
Kconfig | 27 +++++++++++++++++++++++++++
common/Makefile | 1 +
scripts/Makefile.spl | 4 ++++
3 files changed, 32 insertions(+)
diff --git a/Kconfig b/Kconfig
index ef12f9f..dce9800 100644
--- a/Kconfig
+++ b/Kconfig
@@ -336,6 +336,33 @@ config SPL_FIT_IMAGE_POST_PROCESS
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
+config SPL_DFU_SUPPORT
+ bool "Enable SPL with DFU to load binaries to memory device"
+ depends on USB
+ help
+ Currently the SPL does not have capability to load the
+ binaries or boot images to boot devices like ram,eMMC,SPI,etc.
+ This feature enables the DFU (Device Firmware Upgarde) in SPL with
+ RAM memory device support. The ROM code will load and execute
+ the SPL built with dfu. The user can load binaries (u-boot/kernel) to
+ selected device partition from host-pc using dfu-utils.
+ This feature will be useful to flash the binaries to factory
+ or bare-metal boards using USB interface.
+
+choice
+ bool "DFU device selection"
+ depends on SPL_DFU_SUPPORT
+
+config SPL_DFU_RAM
+ bool "RAM device"
+ depends on SPL_DFU_SUPPORT
+ help
+ select RAM/DDR memory device for loading binary images
+ (u-boot/kernel) to the selected device partition using
+ DFU and execute the u-boot/kernel from RAM.
+
+endchoice
+
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI
int "CPU clock frequency"
diff --git a/common/Makefile b/common/Makefile
index e08cd3e..7a7a1b4 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
endif # !CONFIG_SPL_BUILD
ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 3ba9742..3b70c4d 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -57,6 +57,10 @@ libs-y += common/init/
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-y += drivers/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/dfu/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/udc/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/
libs-y += dts/
libs-y += fs/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
