On 23/07/2016 18:23, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.este...@nxp.com>
>
> imx_ddr_size() can be used to calculate the DDR size in runtime.
>
> By using this function we no longer need to define PHYS_SDRAM_SIZE.
>
> Cc: Martin Donnelly <martin.donne...@ge.com>
> Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
> ---
> board/ge/bx50v3/bx50v3.c | 2 +-
> include/configs/ge_bx50v3.h | 2 --
> 2 files changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
> index d45ed44..e9729f8 100644
> --- a/board/ge/bx50v3/bx50v3.c
> +++ b/board/ge/bx50v3/bx50v3.c
> @@ -60,7 +60,7 @@ DECLARE_GLOBAL_DATA_PTR;
>
> int dram_init(void)
> {
> - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
> + gd->ram_size = imx_ddr_size();
>
> return 0;
> }
> diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
> index 4de2460..7a54546 100644
> --- a/include/configs/ge_bx50v3.h
> +++ b/include/configs/ge_bx50v3.h
> @@ -32,8 +32,6 @@
> #define CONFIG_MXC_UART_BASE UART3_BASE
> #define CONFIG_CONSOLE_DEV "ttymxc2"
>
> -#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
> -
> #define CONFIG_SUPPORT_EMMC_BOOT
>
>
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
