By extracting these defines into a header, they can be re-used by other
C sources as well. This will be done by the SPL framework OS boot
support.
Signed-off-by: Stefan Roese
---
arch/powerpc/include/asm/processor.h | 6 ++
arch/powerpc/lib/bootm.c | 6 --
2 files changed, 6
This patchset ports the SPL framework to powerpc. Its based on the
SPL generalization lately done by Tom Rini. The patches is based
on the current "next" branch.
Additionally, a new MPC5200 board port is included, the a3m071 board
port. This board port uses this SPL framework mainly to speed up
b
With this patch, getenv_f() can be included easily into the SPL
binary. With this, SPL boards can now use getenv_f() to read
environment variables (e.g. to detect if the OS or U-Boot shall
be executed).
In the approach this is done for env stored in NOR flash, as this
will be used by an upcoming M
This patch enables the SPL framework to be used on powerpc platforms
and not only ARM.
Signed-off-by: Stefan Roese
---
Changes in v4:
- Build spl.o only for SPL image
Changes in v2:
- Rebased on Tom's SPL framework patches v4
- Add option to skip copying of the mkimage header
arch/powerpc/lib/
This patch adds SPL booting support (NOR flash) for the
MPC5200 platforms.
Signed-off-by: Stefan Roese
---
Changes in v3:
- Don't use special MPC5xxx memcpy in SPL
- Move linker symbols to header spl.h (checkpatch)
Changes in v2:
- Rebased on Tom's SPL framework patches v4
arch/powerpc/cpu/mpc
This patch adds support for the a3m071 board based on the
MPC5200.
Signed-off-by: Stefan Roese
---
Changes in v4:
- Add remark to call "fdt chosen" to board/a3m071/README
- Configure PCS2 as CODEC2 (SPI)
Changes in v2:
- Rebased on Tom's SPL framework patches v4
- a3m071 build: Concat SPL binary
This patch enabled boards using the SPL framework to set
an entry point in the U-Boot mkimage image "u-boot.img".
Until now the entry point in the header has been set to 0.
By setting CONFIG_SYS_UBOOT_START in the board header, boards
can override this default location.
This will be used by the up
This new make target "u-boot-img.bin" consists of the U-Boot
SPL image with the real, full-blown U-Boot image directly
attached to it. The full-blown U-Boot image has the mkimage
header included, with its load-address and entry-point.
This will be used by the upcoming a3m071 MPC5200 board port.
S
From: Xiangfu Liu
* After create u-boot-spl.bin. it needs those 4 commands create final image
for jz4740 cpu.
dd if=spl/u-boot-spl.bin of=u-boot-nand.bin conv=sync bs=8192 count=1
dd if=spl/u-boot-spl.bin of=u-boot-nand.bin conv=sync,notrunc oflag=append
bs=8192 count=1
tr '\0' '\
On 05/10/2012 10:16, Lukasz Majewski wrote:
> Since the pmic_reg_read is the u32 value, the order in which bytes
> are placed to form u32 value is important.
>
> This commit adds the reverse (which is default) and normal byte order.
>
> Signed-off-by: Lukasz Majewski
> Signed-off-by: Kyungmin Pa
On 05/10/2012 10:16, Lukasz Majewski wrote:
> It is necessary to introduce a new system wide function- power_board_init()
>
> It turns out, that power initialization must be done as early as possible.
> In the case of PMIC framework redesign, which aims to support multiple
> instances of PMIC devi
On 05/10/2012 10:16, Lukasz Majewski wrote:
> Enable support for power_board_init() method at TRATS board.
>
> Signed-off-by: Lukasz Majewski
> Signed-off-by: Kyungmin Park
> ---
> Changes for v2:
> - None
> ---
> board/samsung/trats/trats.c | 15 +++
> include/configs/trats.h
On 05/10/2012 10:16, Lukasz Majewski wrote:
> The PMIC framework has been moved to its more natural place
> ./drivers/power from ./drivers/misc directory.
>
> Signed-off-by: Lukasz Majewski
> Signed-off-by: Kyungmin Park
> ---
> Changes for v2:
> - New patch for v2
> ---
> drivers/misc/Makefile
Hi, Andreas
Any feedback of these patches?
Best Regards,
Josh Wu
On 9/14/2012 4:22 PM, Josh Wu wrote:
This patch series enable MCI0 solt in at91sam9x5ek board.
Josh Wu (3):
mmc: at91: add multi block read/write support.
ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
mmc: at91:
Hi Stefano,
> On 05/10/2012 10:16, Lukasz Majewski wrote:
> > Since the pmic_reg_read is the u32 value, the order in which bytes
> > are placed to form u32 value is important.
> >
> > This commit adds the reverse (which is default) and normal byte
> > order.
> >
> > Signed-off-by: Lukasz Majewsk
Hi,
Add support for adjusting the cachability of an L1 section by updating
the MMU. The mmu_set_region_dcache() function allows drivers to make
these changes after the MMU is set up.
It is implemented only for ARMv7 at present.
This is needed for LCD support, where we want to make the LCD fram
Hi Stefano,
> On 05/10/2012 10:16, Lukasz Majewski wrote:
> > It is necessary to introduce a new system wide function-
> > power_board_init()
> >
> > It turns out, that power initialization must be done as early as
> > possible. In the case of PMIC framework redesign, which aims to
> > support mu
Hi,
I am using a u-boot-2010-12 version for the smdkv310 board. I used
dnw tool for loading a u-boot on to the RAM with C0008000 as a load adress.
*Go* command is not working and gets hang when i type the following command
to run the u-boot code on to the u-boot prompt.
go
Hi Stefano,
On Monday, October 1, 2012 8:36:25 PM, Benoît Thébaudeau wrote:
> On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is
> not
> suitable for the multi-instance use case (initialization made
> directly with
> fsl_esdhc_initialize()).
>
> This patch fixes this issue by ad
Hi Stefano,
> On 05/10/2012 10:16, Lukasz Majewski wrote:
> > Enable support for power_board_init() method at TRATS board.
> >
> > Signed-off-by: Lukasz Majewski
> > Signed-off-by: Kyungmin Park
> > ---
> > Changes for v2:
> > - None
> > ---
> > board/samsung/trats/trats.c | 15 +++--
Hi Stefano,
> On 05/10/2012 10:16, Lukasz Majewski wrote:
> > The PMIC framework has been moved to its more natural place
> > ./drivers/power from ./drivers/misc directory.
> >
> > Signed-off-by: Lukasz Majewski
> > Signed-off-by: Kyungmin Park
> > ---
> > Changes for v2:
> > - New patch for v2
Hi Balaji,
On 9 October 2012 16:00, VISWANADHULA BALAJI wrote:
> Hi,
>
> I am using a u-boot-2010-12 version for the smdkv310 board. I used
> dnw tool for loading a u-boot on to the RAM with C0008000 as a load adress.
> *Go* command is not working and gets hang when i type the following c
On 09/10/2012 12:35, Benoît Thébaudeau wrote:
> Hi Stefano,
>
> On Monday, October 1, 2012 8:36:25 PM, Benoît Thébaudeau wrote:
>> On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is
>> not
>> suitable for the multi-instance use case (initialization made
>> directly with
>> fsl_es
On 09/10/2012 11:52, Lukasz Majewski wrote:
> Hi Stefano,
>
>> On 05/10/2012 10:16, Lukasz Majewski wrote:
>>> Since the pmic_reg_read is the u32 value, the order in which bytes
>>> are placed to form u32 value is important.
>>>
>>> This commit adds the reverse (which is default) and normal byte
>
On 09/10/2012 12:25, Lukasz Majewski wrote:
>> Now you want to add a new one. This means we have cases where the PMIC
>> must be initialized before flash, right ?
>
> The case is that PMIC (and other devices) needs to be setup after
> malloc init and before MMC (in our case).
> The board_init() i
On 09/10/2012 12:30, Lukasz Majewski wrote:
>> This enforces my comment in previous patch. We have two CONFIG_
>> options, both must be turned on. So at least one is redundant.IMHO
>> you can drop both of them if power_board_init() is declared weak.
>
> I can define power_board_init() as __weak i
Dear VISWANADHULA BALAJI,
In message
you wrote:
>
> I am using a u-boot-2010-12 version for the smdkv310 board. I used
This is very old code. Please update.
> dnw tool for loading a u-boot on to the RAM with C0008000 as a load adress.
> *Go* command is not working and gets hang when i
Hi Stefano,
> On 09/10/2012 12:30, Lukasz Majewski wrote:
>
> >> This enforces my comment in previous patch. We have two CONFIG_
> >> options, both must be turned on. So at least one is redundant.IMHO
> >> you can drop both of them if power_board_init() is declared weak.
> >
> > I can define pow
Hi,
On Thu, Oct 4, 2012 at 3:14 AM, wrote:
> From: Viktor Krivak
>
> Signed-off-by: Viktor Krivak
> ---
> Simple spi driver which only cache input data and send them back
> on next call. Usefull for high level testing in sandbox.
>
> drivers/spi/Makefile |1 +
> drivers/spi/sandbox
Hi Nikita,
On Thu, Oct 4, 2012 at 1:48 AM, Nikita Kiryanov wrote:
> Hi Simon,
>
>
> On 09/29/2012 03:11 AM, Simon Glass wrote:
>>
>> From: Tom Wai-Hong Tam
>>
>> For bpix == 16, each pixel is 2-byte. fb offset should shift more x bytes.
>>
>> Signed-off-by: Tom Wai-Hong Tam
>> Signed-off-by: Si
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/08/12 17:39, Tom Rini wrote:
> On 10/07/12 04:17, Igor Grinberg wrote:
>> Increase the MAXARGS to support more than 16 arguments.
>
>> Signed-off-by: Igor Grinberg ---
>> include/configs/cm_t35.h |2 +- 1 files changed, 1
>> insertions(+),
On Monday 08 of October 2012 16:38:46 Tom Rini wrote:
> On Sun, Oct 07, 2012 at 05:56:12PM +0200, Pavel Herrmann wrote:
> > Move special case of ide_swap_read() for AU1X00 SoC into SoC-specific
> > directory.
> >
> > Signed-off-by: Pavel Herrmann
>
> Two problems:
> > diff --git a/arch/mips/cpu/
On Sunday 07 of October 2012 20:20:08 Marek Vasut wrote:
> Dear Pavel Herrmann,
>
> > Move input_data() and friends to board/cpc45/ide.c, as overrides for weak
> > aliases in cmd_ide.c
> >
> > note: checkpatch emits warnings about using volatile
> >
> > Signed-off-by: Pavel Herrmann
> > ---
> >
On Sunday 07 of October 2012 20:14:23 Marek Vasut wrote:
> Dear Pavel Herrmann,
>
> > This changes input_data() and friends from static function to global
> > symbols under weak alias, to enable board specific overrides (and
> > therefore get rid of board-specific code in cmd_ide.c)
> > Also decla
Is it possible that a further differentiation is required for setting the I2C
clock frequency in arch/powerpc/cpu/mpc85xx/speed.c? For P1022 and P1013
devices the default ratio CCB/2 is taken. However, on those devices the I2C
clock frequency is equal to CCB. If I'm not mistaken, P1022 and P101
On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
> NOTE: I get a few more size issues with ELDK 4.2 on IXP (that big-endian ARM)
> after this patchset is applied. I wonder if we shouldn't just throw these
> away,
> since they're dead code mostly.
>
> The following changes since com
Hi Tom,
The following changes since commit 661c21dd46e857b74682b0610d83cfea7f3ac3c2:
usb.h: Add udc_disconnect prototype to usb.h (2012-10-08 18:01:17 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm next
for you to fetch changes up to 0d6b8f29a3c59306d6cd8f2baa9
On Mon, Oct 08, 2012 at 11:23:20PM -0700, Grant wrote:
> >> >> git clone git://arago-project.org/git/projects/u-boot-am33x.git
> >> >
> >> > This is definitely NOT what you want to use when somebody mentions
> >> > "latest version". This term always refers to top of tree in mainline
> >> > U-Boot,
On Tue, Oct 09, 2012 at 04:28:05PM +0800, xian...@openmobilefree.net wrote:
> From: Xiangfu Liu
>
> * After create u-boot-spl.bin. it needs those 4 commands create final image
> for jz4740 cpu.
>
> dd if=spl/u-boot-spl.bin of=u-boot-nand.bin conv=sync bs=8192 count=1
> dd if=spl/u-b
On Sun, Sep 30, 2012 at 02:49:09AM +0200, Marek Vasut wrote:
> The mkcksum() function now takes one parameter, the pointer to
> 11-byte wide character array, which it then operates on.
>
> Currently, the function is wrongly passed (dir_entry)->name, which
> is only 8-byte wide character array. Th
Hi Stefano,
On Mon, 08 Oct 2012 11:56:23 +0200, Stefano Babic
wrote:
> Hi Albert,
>
> these changes are in my -next branch, so please pull them into arm/next.
>
> The following changes since commit 4668a086bb0a769b741e3a4ffab85f1c41c7cdb8:
>
> sandbox: Add asm/errno.h (2012-09-29 10:00:29 -
Hi R,
On Tue, 9 Oct 2012 11:16:06 +0530, R Sricharan
wrote:
> On Monday 08 October 2012 10:05 PM, Tom Rini wrote:
> > On Sat, Oct 6, 2012 at 4:34 AM, Albert ARIBAUD
> > wrote:
> >> Hi,
> >>
> >> On Sat, 6 Oct 2012 13:02:49 +0200, Albert ARIBAUD
> >> wrote:
> >>
> >>> Hi All,
> >>>
> >>> With
move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created
ide_init_postreset() (invoked after calling ide_reset after ide_preinit),
some cleanup to make checkpatch happy, enable IDE init hooks in configs of
affected boards.
confusingly, these hooks are used by more than just mpc
This changes input_data() and friends from static function to global symbols
under weak alias, to enable board specific overrides (and therefore get rid of
board-specific code in cmd_ide.c)
Also declare ide_bus_offset in the header file, so other files can use
ATA_CURR_BASE as well.
Signed-off-by:
Keep all IDE-related hooks and overrides in a single file, to avoid confusion
Signed-off-by: Pavel Herrmann
---
Changes for v2:
style fixes
board/cpc45/cpc45.c | 15 ---
board/cpc45/ide.c | 15 +++
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/board
Hi Piotr,
On Tue, 09 Oct 2012 08:45:42 +0200, Piotr Wilczek
wrote:
> This patch turns power down for unused core 1
>
> Signed-off-by: Piotr Wilczek
> Signed-off-by: Kyungmin Park
> CC: Minkyu Kang
> ---
> board/samsung/trats/trats.c |4
> 1 files changed, 4 insertions(+), 0 deletio
move special case of ide_swap_read() for AU1X00 SoC into SoC-specific directory.
Signed-off-by: Pavel Herrmann
---
Changes for v2:
rebase on top of next
include missing to fix compilation
arch/mips/cpu/mips32/au1x00/Makefile | 2 +-
arch/mips/cpu/mips32/au1x00/au1x00_ide.c | 32
Dear Pavel Herrmann,
> On Sunday 07 of October 2012 20:14:23 Marek Vasut wrote:
> > Dear Pavel Herrmann,
> >
> > > This changes input_data() and friends from static function to global
> > > symbols under weak alias, to enable board specific overrides (and
> > > therefore get rid of board-specific
On Wed, Oct 03, 2012 at 02:38:45PM -0500, Joe Hershberger wrote:
> This is a gutted version of my previous env series in an effort to reduce the
> risk to the release that is approaching shortly.
>
> Changes in v2:
> - Further simplified based Mike's comments
>
> Joe Hershberger (5):
> tools/e
On Thu, Sep 27, 2012 at 06:18:39PM -0700, Simon Glass wrote:
> This is a small series of patches to improve keyboard input for matrix
> keyboards:
>
> - Fix an fdt decoding bug which breaks seaboard
> - Permit key repeat/delay to be altered after init
> - Allow key ghosting filter to be enabled/d
Dear Pavel Herrmann,
> On Sunday 07 of October 2012 20:20:08 Marek Vasut wrote:
> > Dear Pavel Herrmann,
> >
> > > Move input_data() and friends to board/cpc45/ide.c, as overrides for
> > > weak aliases in cmd_ide.c
> > >
> > > note: checkpatch emits warnings about using volatile
> > >
> > > Si
On Sat, Sep 29, 2012 at 01:51:47PM -0700, Tom Rini wrote:
> Hey all,
>
> I ran into this problem while testing Pavel Herrmann's patch to move
> externs to . To fix these problems I've taken over the patch.
> Pavel's patch makes all of the sata drivers include , and this
> exposed a number of bui
On Thu, Sep 27, 2012 at 03:06:02PM -, Simon Glass wrote:
> Sometimes it is possible to forget the name of the branch you used to
> generate an upstream series. To assist with this, add an optional
> patman does not use this.
>
> Signed-off-by: Simon Glass
Applied to u-boot/next, thanks!
--
On Thu, Sep 27, 2012 at 03:33:46PM -, Simon Glass wrote:
> Sometimes we don't get a valid filename or line number from checkpatch.pl,
> for example if the patch is in a bad format. Deal with this by using a
> default value, rather than a stack trace.
>
> Signed-off-by: Simon Glass
Applied t
On Fri, Sep 21, 2012 at 12:28:17PM -, Kim Phillips wrote:
> Add support for running source code checkers on u-boot source, e.g.,
> using sparse to aid with typechecking. This comes in especially
> handy as SoC vendors mix and match cores and devices with different
> endianness, thus here we a
On Thu, Sep 27, 2012 at 02:57:34PM -, Kim Phillips wrote:
> thanks to Tom Rini for the good idea.
>
> Signed-off-by: Kim Phillips
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boo
On Fri, Sep 28, 2012 at 03:36:14AM -, Fabio Estevam wrote:
> There are some errors reported by checkpatch.pl that can be easily cleaned up
> by
> using the cleanpatch tool.
>
> Import the cleanpatch script from linux kernel 3.5.4 stable version as from
> the
> following commit:
>
> commi
On Wed, Oct 03, 2012 at 08:36:11AM -, Daniel Schwierzeck wrote:
> From: Daniel Schwierzeck
>
> This fixes a warning when compiling with ELDK-5.2.1 for MIPS64:
>
> cmd_bdinfo.c: In function 'print_lnum':
> cmd_bdinfo.c:56:2: warning: format '%llX' expects argument of type 'long long
> unsig
The mkcksum() function now takes one parameter, the pointer to
11-byte wide character array, which it then operates on.
Currently, the function is wrongly passed (dir_entry)->name, which
is only 8-byte wide character array. Though by further inspecting
the dir_entry structure, it can be noticed th
On Tue, Oct 09, 2012 at 01:34:35PM +0200, Stefano Babic wrote:
> On 09/10/2012 12:25, Lukasz Majewski wrote:
[snip]
> >> We use often the "weak" mechanism to avoid that a board maintainer is
> >> constrained to implement an empty function only to make happy the
> >> linker. It is better to declare
On 10/06/2012 11:59:17 AM, Albert ARIBAUD wrote:
Hi Anatolij,
On Sat, 6 Oct 2012 11:31:03 +0200, Anatolij Gustschin
wrote:
> Fix:
> yaffs_guts.c: In function 'yaffs_check_chunk_erased':
> yaffs_guts.c:324:6: warning: variable 'result' set but not used
> [-Wunused-but-set-variable]
[snip]
Te
On Mon, Oct 08, 2012 at 09:50:18PM +0200, Albert ARIBAUD wrote:
> Under option -munaligned-access, gcc can perform local char
> or 16-bit array initializations using misaligned native
> accesses which will throw a data abort exception. Fix files
> where these array initializations were unneeded, a
Hi Tom,
On Tue, 9 Oct 2012 11:34:11 -0700, Tom Rini wrote:
> On Mon, Oct 08, 2012 at 09:50:18PM +0200, Albert ARIBAUD wrote:
>
> > Under option -munaligned-access, gcc can perform local char
> > or 16-bit array initializations using misaligned native
> > accesses which will throw a data abort e
On Tue, Oct 09, 2012 at 01:09:22PM -0500, Scott Wood wrote:
> On 10/06/2012 11:59:17 AM, Albert ARIBAUD wrote:
> >Hi Anatolij,
> >
> >On Sat, 6 Oct 2012 11:31:03 +0200, Anatolij Gustschin
> >wrote:
> >
> >> Fix:
> >> yaffs_guts.c: In function 'yaffs_check_chunk_erased':
> >> yaffs_guts.c:324:6: w
On Tue, Oct 09, 2012 at 08:42:26PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> On Tue, 9 Oct 2012 11:34:11 -0700, Tom Rini wrote:
>
> > On Mon, Oct 08, 2012 at 09:50:18PM +0200, Albert ARIBAUD wrote:
> >
> > > Under option -munaligned-access, gcc can perform local char
> > > or 16-bit array init
On 10/09/2012 01:51:14 PM, Tom Rini wrote:
On Tue, Oct 09, 2012 at 01:09:22PM -0500, Scott Wood wrote:
> On 10/06/2012 11:59:17 AM, Albert ARIBAUD wrote:
> >Hi Anatolij,
> >
> >On Sat, 6 Oct 2012 11:31:03 +0200, Anatolij Gustschin
> >wrote:
> >
> >> Fix:
> >> yaffs_guts.c: In function 'yaffs
Under option -munaligned-access, gcc can perform local char
or 16-bit array initializations using misaligned native
accesses which will throw a data abort exception. Fix files
where these array initializations were unneeded, and for
files known to contain such initializations, enforce gcc
option -m
Under option -munaligned-access, gcc can perform local char
or 16-bit array initializations using misaligned native
accesses which will throw a data abort exception. Fix files
where these array initializations were unneeded, and for
files known to contain such initializations, enforce gcc
option -m
Under option -munaligned-access, gcc can perform local char
or 16-bit array initializations using misaligned native
accesses which will throw a data abort exception. Fix files
where these array initializations were unneeded, and for
files known to contain such initializations, enforce gcc
option -m
This patch has been sent without a proper Vx indication.
Resending.
Amicalement,
--
Albert.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 09/29/2012 03:53 PM, Marek Vasut wrote:
> Enable CONFIG_SERIAL_MULTI for all builds of U-Boot. That includes
> both SPL builds and non-SPL builds, everything. To avoid poluting
> this patch with removal of ifdef-endif constructions containing
> CONFIG_SERIAL_MULTI, the CONFIG_SERIAL_MULTI is tem
From: Stephen Warren
The FAT filesystem code knows which partition ID it is operating on.
Currently, this is passed to fat_register_device() as a parameter.
In order to convert FAT to the more standardized fat_set_blk_dev(), the
information needs to come from somewhere else, and the partition
def
From: Stephen Warren
This removes the standalone cur_part_nr variable, opening the way to
replacing fat_register_device() with fat_set_blk_dev().
Note that when get_partition_info() fails and we use the entire disk,
the correct partition number is 0 (whole disk) not 1 (first partition),
so that
From: Stephen Warren
This makes the FAT filesystem API more consistent with other block-based
filesystems. If in the future standard multi-filesystem commands such as
"ls" or "load" are implemented, having FAT work the same way as other
filesystems will be necessary.
Convert cmd_fat.c to the new
On 10/09/2012 08:23 AM, Tom Rini wrote:
> On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
>
>> NOTE: I get a few more size issues with ELDK 4.2 on IXP (that
>> big-endian ARM) after this patchset is applied. I wonder if we
>> shouldn't just throw these away, since they're dead code mo
Hi Graeme,
On Wed, Oct 3, 2012 at 6:01 PM, Graeme Russ wrote:
> Hi Simon,
>
> At first I thought this patch dealt with the 'board reset' code but
> then realised it deals with the 'reset vector' - Can you fix the patch
> subject please
Will do.
>
> On Thu, Oct 4, 2012 at 10:39 AM, Simon Glass
2012/10/9 Tom Rini :
> On Tue, Oct 09, 2012 at 04:28:05PM +0800, xian...@openmobilefree.net wrote:
>
>> From: Xiangfu Liu
>>
>> * After create u-boot-spl.bin. it needs those 4 commands create final image
>> for jz4740 cpu.
>>
>> dd if=spl/u-boot-spl.bin of=u-boot-nand.bin conv=sync bs=8
On Tue, Oct 09, 2012 at 03:03:28PM -0600, Stephen Warren wrote:
> On 10/09/2012 08:23 AM, Tom Rini wrote:
> > On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
> >
> >> NOTE: I get a few more size issues with ELDK 4.2 on IXP (that
> >> big-endian ARM) after this patchset is applied. I w
On Tue, Oct 09, 2012 at 02:33:51PM -0600, Stephen Warren wrote:
> On 09/29/2012 03:53 PM, Marek Vasut wrote:
> > Enable CONFIG_SERIAL_MULTI for all builds of U-Boot. That includes
> > both SPL builds and non-SPL builds, everything. To avoid poluting
> > this patch with removal of ifdef-endif constr
On Tue, Oct 09, 2012 at 05:34:13PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit 661c21dd46e857b74682b0610d83cfea7f3ac3c2:
>
> usb.h: Add udc_disconnect prototype to usb.h (2012-10-08 18:01:17 -0700)
>
> are available in the git repository at:
>
> git://git.
Hi Josh,
On 09.10.12 12:11, Josh Wu wrote:
> Hi, Andreas
>
> Any feedback of these patches?
short answer: no ;)
I think they could go into next (no obvious objections), but I would
like to do some runtime tests on avr32 before. Beside that, if you do
not insist on applying them ASAP to next I w
On Tue, Oct 09, 2012 at 02:08:13PM -0500, Scott Wood wrote:
> On 10/09/2012 01:51:14 PM, Tom Rini wrote:
> >On Tue, Oct 09, 2012 at 01:09:22PM -0500, Scott Wood wrote:
> >> On 10/06/2012 11:59:17 AM, Albert ARIBAUD wrote:
> >> >Hi Anatolij,
> >> >
> >> >On Sat, 6 Oct 2012 11:31:03 +0200, Anatolij
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/09/12 15:09, Stephen Warren wrote:
> On 10/09/2012 03:38 PM, Tom Rini wrote:
>> On Tue, Oct 09, 2012 at 02:33:51PM -0600, Stephen Warren wrote:
>>> On 09/29/2012 03:53 PM, Marek Vasut wrote:
Enable CONFIG_SERIAL_MULTI for all builds of U-Boo
On 10/09/2012 03:32 PM, Tom Rini wrote:
> On Tue, Oct 09, 2012 at 03:03:28PM -0600, Stephen Warren wrote:
>> On 10/09/2012 08:23 AM, Tom Rini wrote:
>>> On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
>>>
NOTE: I get a few more size issues with ELDK 4.2 on IXP
(that big-endi
On 10/09/2012 03:38 PM, Tom Rini wrote:
> On Tue, Oct 09, 2012 at 02:33:51PM -0600, Stephen Warren wrote:
>> On 09/29/2012 03:53 PM, Marek Vasut wrote:
>>> Enable CONFIG_SERIAL_MULTI for all builds of U-Boot. That
>>> includes both SPL builds and non-SPL builds, everything. To
>>> avoid poluting th
On 10/09/2012 04:13 PM, Tom Rini wrote:
> On 10/09/12 15:09, Stephen Warren wrote:
>> On 10/09/2012 03:38 PM, Tom Rini wrote:
>>> On Tue, Oct 09, 2012 at 02:33:51PM -0600, Stephen Warren wrote:
On 09/29/2012 03:53 PM, Marek Vasut wrote:
> Enable CONFIG_SERIAL_MULTI for all builds of U-Boot
Hi Tom,
On Tue, 9 Oct 2012 14:32:08 -0700, Tom Rini wrote:
> On Tue, Oct 09, 2012 at 03:03:28PM -0600, Stephen Warren wrote:
> > On 10/09/2012 08:23 AM, Tom Rini wrote:
> > > On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
> > >
> > >> NOTE: I get a few more size issues with ELDK 4
On Tue, Oct 09, 2012 at 03:15:40PM -0700, Stephen Warren wrote:
> On 10/09/2012 04:13 PM, Tom Rini wrote:
> > On 10/09/12 15:09, Stephen Warren wrote:
> >> On 10/09/2012 03:38 PM, Tom Rini wrote:
> >>> On Tue, Oct 09, 2012 at 02:33:51PM -0600, Stephen Warren wrote:
> On 09/29/2012 03:53 PM, Ma
On Tue, Oct 09, 2012 at 05:34:13PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit 661c21dd46e857b74682b0610d83cfea7f3ac3c2:
>
> usb.h: Add udc_disconnect prototype to usb.h (2012-10-08 18:01:17 -0700)
>
> are available in the git repository at:
>
> git://git.
Hi Łukasz,
On Tue, 9 Oct 2012 14:45:33 -0700, Tom Rini wrote:
> On Tue, Oct 09, 2012 at 05:34:13PM +0200, Albert ARIBAUD wrote:
>
> > Hi Tom,
> >
> > The following changes since commit 661c21dd46e857b74682b0610d83cfea7f3ac3c2:
> >
> > usb.h: Add udc_disconnect prototype to usb.h (2012-10-08
On Sun, Sep 30, 2012 at 02:21:31AM +0200, Marek Vasut wrote:
> This patch series implants slightly modified kernel-doc documentation
> generator from Linux kernel into U-Boot. First patch pulls in all the
> necessary components with minor modifications made to them to work with
> the layout of U-B
Dear Tom Rini,
> On Sun, Sep 30, 2012 at 02:21:31AM +0200, Marek Vasut wrote:
> > This patch series implants slightly modified kernel-doc documentation
> > generator from Linux kernel into U-Boot. First patch pulls in all the
> > necessary components with minor modifications made to them to work w
Rework the RX buffer init so that it's easier to understand.
Firstly, allocate the whole RX buffer as one large continuous
piece of memory. Also, drop all these writel() accessors used
on the FEC RX DMA descriptor, since it's all flat bogus.
Finally, this makes recoverable stalls of the FEC on i.M
Hi Stephen,
On Tue, 09 Oct 2012 16:14:23 -0600, Stephen Warren
wrote:
> This actually turns out to be less work for custodians if there aren't
> any dependencies between patch series, since whenever you send a pull
> request right now, you do:
>
> a) Fetch latest upstream.
> b) Rebase onto it.
Add memory barrier to cache invalidate and flush calls.
Signed-off-by: Marek Vasut
CC: Albert Aribaud
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/cache.c | 10 ++
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/arm92
On Mon, Oct 01, 2012 at 12:37:26PM +0200, Marek Vasut wrote:
> Dear Wolfgang Denk,
>
> > Dear Marek Vasut,
> >
> > In message <201210011107.45164.ma...@denx.de> you wrote:
> > > Agreed, not the whole file. But, can you check the rules I tried to
> > > outline?
> >
> > Is there a summary somewher
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/09/12 15:37, Marek Vasut wrote:
> Dear Tom Rini,
>
>> On Sun, Sep 30, 2012 at 02:21:31AM +0200, Marek Vasut wrote:
>>> This patch series implants slightly modified kernel-doc
>>> documentation generator from Linux kernel into U-Boot. First
>>>
Hi Simon,
On Wed, Oct 10, 2012 at 8:15 AM, Simon Glass wrote:
>>> diff --git a/arch/x86/cpu/resetvec.S b/arch/x86/cpu/resetvec.S
>>> index 44aee5f..5b359ff 100644
>>> --- a/arch/x86/cpu/resetvec.S
>>> +++ b/arch/x86/cpu/resetvec.S
>>> @@ -25,6 +25,10 @@
>>>
>>> /* Reset vector, jumps to start16
On Tue, Oct 09, 2012 at 04:14:23PM -0600, Stephen Warren wrote:
> On 10/09/2012 03:32 PM, Tom Rini wrote:
> > On Tue, Oct 09, 2012 at 03:03:28PM -0600, Stephen Warren wrote:
> >> On 10/09/2012 08:23 AM, Tom Rini wrote:
> >>> On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
> >>>
>
On 10/09/2012 05:14:23 PM, Stephen Warren wrote:
On 10/09/2012 03:32 PM, Tom Rini wrote:
> On Tue, Oct 09, 2012 at 03:03:28PM -0600, Stephen Warren wrote:
>> On 10/09/2012 08:23 AM, Tom Rini wrote:
>>> On Sun, Oct 07, 2012 at 08:49:00PM +0200, Marek Vasut wrote:
>>>
NOTE: I get a few more si
1 - 100 of 120 matches
Mail list logo
