With this patch, getenv_f() can be included easily into the SPL binary. With this, SPL boards can now use getenv_f() to read environment variables (e.g. to detect if the OS or U-Boot shall be executed).
In the approach this is done for env stored in NOR flash, as this will be used by an upcoming MPC5200 board port. Signed-off-by: Stefan Roese <s...@denx.de> --- Changes in v4: - getenv_f not extracted into separate file. Only Makefile additions for SPL_BUILD needed. Changes in v3: - Rebased on current master plus SPL framework v7 common/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/common/Makefile b/common/Makefile index a4eb477..8dd5568 100644 --- a/common/Makefile +++ b/common/Makefile @@ -197,6 +197,9 @@ COBJS-$(CONFIG_CMD_DFU) += cmd_dfu.o endif ifdef CONFIG_SPL_BUILD +COBJS-y += cmd_nvedit.o +COBJS-y += env_common.o +COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o -- 1.7.12.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
