to make USB2 worked in gadget mode, we need to set it's 'dr_mode' to
'peripheral' in hwconfig, but driver starts scan from 'usb1', it'll break
if it cannot find 'usb1', so we need to tell driver do not break until it
scaned all the 'usbx' that the board may have.
Signed-off-by: Shaohui Xie
---
ch
Disable D cache for goni target (s5p) - rationale:
1. Before change introduced in commit
SHA1:c2dd0d45540397704de9b13287417d21049d34c6 the D-cache for
GONI target was disabled. This change was supposed to
preserve this state.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minky
Hi Albert,
>> the serial device names have been changed from ttySx to ttyOx, so the
>> console device name
>> should be also changed to support the latest kernel versions.
>>
>> Signed-off-by: Yegor Yefremov
>>
>> ---
>
> This does not apply cleanly -- sorry, I should have pulled this earlier. Can
Hi Yegor,
Le 18/07/2011 09:32, Yegor Yefremov a écrit :
> Hi Albert,
>
>>> the serial device names have been changed from ttySx to ttyOx, so the
>>> console device name
>>> should be also changed to support the latest kernel versions.
>>>
>>> Signed-off-by: Yegor Yefremov
>>>
>>> ---
>>
>> This do
Hello,
a patch for this board is in u-boot-imx already, a patch that changes
the maintainer is in u-boot-arm.
Thanks,
Torsten
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk, Sandeep Paulraj and Albert Aribaud,
I'am working on the OMAP3 SPL which is part of my bachelor thesis. Some of the
code was already posted - but i staled my work to wait for the new SPL layout
and the work on OMAP4 by Aneeshi V.
This weekend Annesh V. released the OMAP4 patch
Hi all,
Le 18/07/2011 10:02, Torsten Koschorrek a écrit :
> Hello,
>
> a patch for this board is in u-boot-imx already, a patch that changes
> the maintainer is in u-boot-arm.
Indeed -- note that the bugfix patch was committed to the imx tree after
the lst pull request to ARM, so it is not yet p
Hi all,
Le 18/07/2011 00:46, Linus Walleij a écrit :
> As mentioned I'm assuming maintainership for the integratorap,
> patch is on the list since two days or so.
Patch 14/52 marked 'deferred' in patchwork pending inclusion of
integratorap patches.
Amicalement,
--
Albert.
_
Le 18/07/2011 10:29, Simon Schwarz a écrit :
> Dear Wolfgang Denk, Sandeep Paulraj and Albert Aribaud,
>
> I'am working on the OMAP3 SPL which is part of my bachelor thesis. Some of the
> code was already posted - but i staled my work to wait for the new SPL layout
> and the work on OMAP4 by Aneesh
Hi Albert,
the serial device names have been changed from ttySx to ttyOx, so the
console device name
should be also changed to support the latest kernel versions.
Signed-off-by: Yegor Yefremov
---
>>>
>>> This does not apply cleanly -- sorry, I should have pulled
>From 74f884f3d76feda60d8fa1dff1f3fef8bd89acb1 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov
Date: Mon, 18 Jul 2011 10:37:35 +0200
Subject: [PATCH] am3517evm: change console device from ttyS2 to ttyO2
the serial device names have been changed from ttySx to ttyOx, so the
console device name should
Hi Albert,
On Sun, Jul 17, 2011 at 2:35 PM, Albert ARIBAUD
wrote:
> Hi Aneesh,
>
> Le 16/07/2011 18:25, Aneesh V a écrit :
>>
>> OMAP4460 is the latest addition to the OMAP4 family.
>> OMAP4460 has dual core Cortex-A9 CPUs that can be clocked upto
>> 1.5 GHz
>>
>> The memory architecture has bee
Hello Ben,
--- On Wed, 1/6/11, Ben Gardiner wrote:
> > Using mkfs.ubifs and ubinize I have created an image
> with 5 volumes. In Linux I could flash it using "ubiformat
> /dev/mtd1 -f /root/ubi.img" and attach it using "ubiattach
> /dev/ubi_ctrl -m 1". It worked.
> >
> > In production I would pre
Hi Simon, Albert
On 18/07/11 18:47, Albert ARIBAUD wrote:
> Le 18/07/2011 10:29, Simon Schwarz a écrit :
>> Dear Wolfgang Denk, Sandeep Paulraj and Albert Aribaud,
[snip]
> Personally, when a patch was initially submitted before the end of the
> merge window, I will accept subsequent versions o
Hi Albert,
On 07/16/2011 12:51 PM, Albert ARIBAUD wrote:
> Le 15/06/2011 09:38, Holger Brunck a écrit :
>
>> I agree for a single board support, but this is not possible in our
>> approach. We
>> include config_cmd_default.h in keymile-common.h. And keymile-common.h is
>> valid
>> for our power
Le 18/07/2011 10:48, Yegor Yefremov a écrit :
>> From 74f884f3d76feda60d8fa1dff1f3fef8bd89acb1 Mon Sep 17 00:00:00 2001
> From: Yegor Yefremov
> Date: Mon, 18 Jul 2011 10:37:35 +0200
> Subject: [PATCH] am3517evm: change console device from ttyS2 to ttyO2
>
> the serial device names have been change
This patch enables ethernet support for Marvell GplugD board. Network
related commands works.
Signed-off-by: Ajay Bhargav
---
arch/arm/include/asm/arch-armada100/armada100.h | 57 +++
arch/arm/include/asm/arch-armada100/mfp.h | 19
board/Marvell/gplugd/gplu
This patch adds support for 88E3015 PHY for Marvell GplugD board.
Signed-off-by: Ajay Bhargav
---
board/Marvell/gplugd/gplugd.c | 35 +++
include/configs/gplugd.h | 14 ++
2 files changed, 49 insertions(+), 0 deletions(-)
diff --git a/board/M
This patch adds generic GPIO driver framework support for Armada100 series.
To enable GPIO driver define CONFIG_ARMADA100_GPIO and for GPIO commands
define CONFIG_CMD_GPIO in your board configuration file.
NOTE: This driver assumes proper configuration of MFP register for the GPIO
in use.
These
This patch adds support for Fast Ethernet Controller driver for
Armada100 series.
Signed-off-by: Ajay Bhargav
---
arch/arm/include/asm/arch-armada100/armada100.h |1 +
drivers/net/Makefile|1 +
drivers/net/armada100_fec.c | 816 +++
Dear Minkyu,
On 15 July 2011 14:23, Minkyu Kang wrote:
> Dear Chander Kashyap,
>
> On 12 July 2011 17:48, Chander Kashyap wrote:
>> Origen board is based upon S5PV310 SoC which is similiar to
>> S5PC210 SoC.
>>
>> Signed-off-by: Chander Kashyap
>> ---
>> MAINTAINERS |
On Monday 18 July 2011 03:12 PM, Daniel Schwierzeck wrote:
> Dear Wolfgang,
>
> On Sat, Jul 16, 2011 at 5:02 PM, Wolfgang Denk wrote:
>> Dear Daniel Schwierzeck,
>>
>> In message<4e2193dc.8040...@googlemail.com> you wrote:
>>>
>>> But CONFIG_SYS_SPL_TEXT_BASE seems to be the right name for this o
Dear Wolfgang,
On Sat, Jul 16, 2011 at 5:02 PM, Wolfgang Denk wrote:
> Dear Daniel Schwierzeck,
>
> In message <4e2193dc.8040...@googlemail.com> you wrote:
>>
>> But CONFIG_SYS_SPL_TEXT_BASE seems to be the right name for this option.
>> Shall I fix it in the SPL framework patches?
>
> This is ge
Hi Wolfgang,
Le 18/07/2011 00:16, Wolfgang Denk a écrit :
> Dear Albert,
>
> as announced a number of times before, the following patch series
> removes a number of ARM boards that have been left unmaintained and
> broken for a long time.
Generic question: since this patch arrived on july 18th, p
Dear Reinahrd Meyer,
Am 01.07.2011 16:47, schrieb Andreas Bießmann:
> The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit
> GmbH.
> See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
> for detailed information about this device.
>
> Signed-off-by:
Am 18.07.2011 11:41, schrieb Albert ARIBAUD:
> Le 18/07/2011 10:48, Yegor Yefremov a écrit :
>>> From 74f884f3d76feda60d8fa1dff1f3fef8bd89acb1 Mon Sep 17 00:00:00 2001
>> From: Yegor Yefremov
>> Date: Mon, 18 Jul 2011 10:37:35 +0200
>> Subject: [PATCH] am3517evm: change console device from ttyS2 to
Adds support for ORIGEN board with MMC Booting.
Chander Kashyap (2):
ARMV7: Add support for Samsung ORIGEN board
ORIGEN: Add MMC SPL support
MAINTAINERS |1 +
board/samsung/origen/Makefile | 46 ++
board/samsung/origen/lowlevel_
Origen board is based upon S5PV310 SoC which is similiar to
S5PC210 SoC.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- Board entry added Alphabetically in boards.cfg
- Used get_Ram_size function to calculate ram size
MAINTAINERS
Adds mmc boot support.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- Added Dirk Behme's patch
- SMDKV310: Fix host compilation of mkv310_image
Changes for v3:
- None
mmc_spl/board/samsung/origen/Makefile | 105 +++
mmc_spl/board/samsun
> -Original Message-
> From: Yegor Yefremov [mailto:yegor_s...@visionsystems.de]
> Sent: Monday, July 18, 2011 3:48 PM
> To: Albert ARIBAUD
> Cc: u-boot@lists.denx.de; Hiremath, Vaibhav
> Subject: Re: [PATCH v2] am3517evm: change console device from ttyS2 to
> ttyO2
>
> Am 18.07.2011 11:4
On Mon, Jul 18, 2011 at 9:23 AM, Lukasz Majewski wrote:
> Disable D cache for goni target (s5p) - rationale:
>
> 1. Before change introduced in commit
> SHA1:c2dd0d45540397704de9b13287417d21049d34c6 the D-cache for
> GONI target was disabled. This change was supposed to
> preserve this state.
I
Hi Yegor,
Le 18/07/2011 10:48, Yegor Yefremov a écrit :
>> From 74f884f3d76feda60d8fa1dff1f3fef8bd89acb1 Mon Sep 17 00:00:00 2001
> From: Yegor Yefremov
> Date: Mon, 18 Jul 2011 10:37:35 +0200
> Subject: [PATCH] am3517evm: change console device from ttyS2 to ttyO2
>
> the serial device names have
Le 18/07/2011 12:23, Hiremath, Vaibhav a écrit :
>
>> -Original Message-
>> From: Yegor Yefremov [mailto:yegor_s...@visionsystems.de]
>> Sent: Monday, July 18, 2011 3:48 PM
>> To: Albert ARIBAUD
>> Cc: u-boot@lists.denx.de; Hiremath, Vaibhav
>> Subject: Re: [PATCH v2] am3517evm: change cons
Name.
Tell.
Address.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Please dont. I have the patches here, will send them during the week.
Best wishes
Kristoffer
On Mon, Jul 18, 2011 at 12:16:32AM +0200, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk
> Cc: Kristoffer Ericson
> ---
> MAINTAINERS |4 -
> board/jornada/Makefile| 53 --
From: Horst Kronstorfer
Tell 'find' to follow symbolic links, so that files under include/asm
and arch/$(ARCH)/include/asm/arch are added to the indexing file list.
Signed-off-by: Horst Kronstorfer
---
Changes for v2:
- Apply this change to all source cross-reference targets
Changes for v3:
Dear Albert Aribaud,
On 18.07.11, Albert Aribaud wrote:
> You mean you can release a patch before the end of the week, right?
>
> Personally, when a patch was initially submitted before the end of
> the merge window, I will accept subsequent versions of it and apply
> them even if they are submit
Hi Simon, Albert
On Monday, July 18, 2011, Simon Schwarz wrote:
> Dear Albert Aribaud,
>
> On 18.07.11, Albert Aribaud wrote:
>> You mean you can release a patch before the end of the week, right?
>>
>> Personally, when a patch was initially submitted before the end of
>> the merge window, I will
Dear Linus, dear Albert ARIBAUD,
In message <4e23efe4.8030...@aribaud.net> Albert ARIBAUD wrote:
>
> Le 18/07/2011 00:46, Linus Walleij a écrit :
> > As mentioned I'm assuming maintainership for the integratorap,
> > patch is on the list since two days or so.
>
> Patch 14/52 marked 'deferred' in
Dear Graeme Russ,
In message <4e23ff5c.7060...@gmail.com> you wrote:
>
> And if the patch is a part of a series, update the version of *all* patches
> in the series (with a 'no changes' comment for any individual patches in
> the series which have not been update). Nothing worse than a series bei
Dear Daniel Schwierzeck,
In message
you wrote:
>
> ok I won't change the SPL patches. So CONFIG_SPL_* is the new prefix
> for all SPL specific config options?
I'm fine with that.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235
Dear Albert ARIBAUD,
In message <4e24020b.4030...@aribaud.net> you wrote:
>
> Generic question: since this patch arrived on july 18th, past the merge
> window closing time, I assume it is now intended for the ARM next
> branch, i.e. it will not be applied to the 2011-09 release. Or do you
> ex
Hi Wolfgang
On Monday, July 18, 2011, Wolfgang Denk wrote:
> Dear Graeme Russ,
>
> In message <4e23ff5c.7060...@gmail.com> you wrote:
>>
>> And if the patch is a part of a series, update the version of *all* patches
>> in the series (with a 'no changes' comment for any individual patches in
>> th
Hi Simon,
Le 18/07/2011 13:31, Simon Schwarz a écrit :
> Dear Albert Aribaud,
Just "Albert" is fine. :)
> On 18.07.11, Albert Aribaud wrote:
>> You mean you can release a patch before the end of the week, right?
>>
>> Personally, when a patch was initially submitted before the end of
>> the merg
Dear Kristoffer Ericson,
In message <20110718112058.GA2596@Boggieman> you wrote:
> Please dont. I have the patches here, will send them during the week.
You are late. Board removal has been announced a number of times,
several months ago. Why do you wake up only now, after letting me
spend the
On 07/18/2011 12:17 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk
> Cc: Konstantin Kletschke
> ---
> MAINTAINERS |3 -
> MAKEALL |1 -
> board/scb9328/Makefile| 51 --
> board/scb9328/config.mk | 10 --
> board/scb93
Hi all,
this to remind you that the merge window for the next release
(v2011.09) was closed on Sun Jul 17, 2011.
Release "v2011.09" is scheduled in 48 days - on September 04, 2011.
You may - or may not - have noticed that I posted a larger patch set
to remove all support for broken ARM boards t
Dear Graeme Russ,
In message
you wrote:
>
> > Actually I do not want to make this a requirement. =A0If we have a large
> > patch series, and there are changes requested to only one or two of
> > the patches, it is much more efficient to repost just these instead
> > always the whole stack again
On 07/18/2011 12:17 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk
> ---
> MAINTAINERS|2 -
> MAKEALL|3 -
> Makefile |9 -
> README |
Dear Albert ARIBAUD,
In message <4e242306.1000...@aribaud.net> you wrote:
>
> What might bother *you*, however, is that ATM the SPL framework patches
> are RFC, so they won't be applied as such, and Aneesh's OMAP4 patches
> are not applied yet. And you need those patches applied for yours to be.
Dear Stefano Babic,
In message <4e2425ec.5030...@denx.de> you wrote:
>
> NAK. The patch to fix this board was already sent and it was repost last
> week because I asked for some changes. I merged it into u-boot-imx and
> it is ready for the next pull request.
Then please send this pull request AS
Dear Stefano Babic,
In message <4e24273c.7040...@denx.de> you wrote:
>
> I sent patches to fix the versatile board, and tested for QEMU support:
>
> http://patchwork.ozlabs.org/patch/101790/
But I don't see it in mainline, and the state of mainline at the end
of the merge window is my reference.
Hi Wolfgang,
Le 18/07/2011 14:08, Wolfgang Denk a écrit :
> Dear Albert ARIBAUD,
>
> In message<4e24020b.4030...@aribaud.net> you wrote:
>>
>> Generic question: since this patch arrived on july 18th, past the merge
>> window closing time, I assume it is now intended for the ARM next
>> branch, i.
On 07/18/2011 12:16 AM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk
> ---
> MAKEALL |1 -
> board/mx1fs2/Makefile| 51 ---
> board/mx1fs2/config.mk | 10 -
> board/mx1fs2/flash.c | 849
> --
> boa
On 07/18/2011 10:29 AM, Albert ARIBAUD wrote:
> Hi all,
>
> Le 18/07/2011 10:02, Torsten Koschorrek a écrit :
>> Hello,
>>
>> a patch for this board is in u-boot-imx already, a patch that changes
>> the maintainer is in u-boot-arm.
>
> Indeed -- note that the bugfix patch was committed to the imx
* Fix: if using sha1 command watchdog timed out
* change function call sha1_csum(..) to the watchdog-safe variant
sha1_csum_wd(..) to support watchdog reset
Signed-off-by: Jens Scharsig
---
common/cmd_sha1sum.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/common/c
* Fix: if using md5 command watchdog timed out
* change function call md5(..) to the watchdog-safe variant
md5_wd(..) to support watchdog reset
Signed-off-by: Jens Scharsig
---
common/cmd_md5sum.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/common/cmd_md5sum.c b/
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 49473adabff703d0784f1f7457f29bde0a4893d1:
am3517evm: change console device from ttyS2 to ttyO2 (2011-07-18
12:35:52 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
David Ja
(removed my old e-mail address)
Hi Wolfgang,
Le 18/07/2011 14:34, Wolfgang Denk a écrit :
> Dear Stefano Babic,
>
> In message<4e24273c.7040...@denx.de> you wrote:
>>
>> I sent patches to fix the versatile board, and tested for QEMU support:
>>
>> http://patchwork.ozlabs.org/patch/101790/
>
> Bu
> Hi Laurence,
>
> Le 15/07/2011 13:27, Laurence Withers a écrit :
> > In preparation for a generic GPIO driver for the DA8xx processors,
> > rename to and fix up all files
> > which include it.
> >
> > Signed-off-by: Laurence Withers
> > ---
> > arch/arm/include/asm/arch-davinci/gpio.h
ถ้าคุณไม่สามารถเห็นเนื้อหาด้านล่างได้ชัดเจน กรุณาดูที่ "แสดงเนื้อหา" (Show
content) "Display Image Below" หรือ "View"
งาน Part Time ผ่านระบบ Internet 100%
กลยุทธ์การสร้างรายได้เสริมบนโลก Online
สำหรับผู้ที่กำลังมองหารายได้เสริม แต่ไม่มีเวลาที่มากพอ
นี่คืองานในรูปแบบใหม่ในการสร้าง
Hi Sandeep,
Le 18/07/2011 15:02, Paulraj, Sandeep a écrit :
>
>> Hi Laurence,
>>
>> Le 15/07/2011 13:27, Laurence Withers a écrit :
>>> In preparation for a generic GPIO driver for the DA8xx processors,
>>> rename to and fix up all files
>>> which include it.
>>>
>>> Signed-off-by: Laurence Wi
On 07/18/2011 02:47 PM, Albert ARIBAUD wrote:
> As I said, the scb9328 bugfix commit was added to the IMX tree *after*
> the last IMX pull request (which I applied), so I need a new IMX pull
> request for the ARM tree to pull the new IX commits in; then only can I
> send you a pull request of my o
Hi Aneesh,
On Sat, 16 Jul 2011 18:23:19 +0530
Aneesh V wrote:
> * omap4_rev_string() reference changed to omap_rev_string()
>+ char omap4_rev_string[50];
[snip]
> + printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev,
> U_BOOT_DATE,
> + U_BOOT_TIME);
> + omap_rev_string(om
The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
powerpc/85xx: Add default usb mode and phy type to hwconfig (2011-07-11
13:24:21 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Becky Bruce (1):
powerpc/mpc8548cds:
From: Stefan Bigler
The new SAMSUNG NAND Flash K9F1G08U0D require a bigger chip_delay.
The Data Transfer from Cell to Register is >= 35us. Other Vendors
and older chips normally use >= 25us. To have enough margin 40us
is selected.
Signed-off-by: Stefan Bigler
Signed-off-by: Holger Brunck
cc: P
Hi,
On 07/18/2011 02:29 PM, Wolfgang Denk wrote:
> Dear Graeme Russ,
>
> In message
> you
> wrote:
>>
>>> Actually I do not want to make this a requirement. =A0If we have a large
>>> patch series, and there are changes requested to only one or two of
>>> the patches, it is much more efficient
> -Original Message-
> From: Laurence Withers [mailto:lwith...@guralp.com]
> Sent: Saturday, July 16, 2011 6:42 AM
> To: u-boot@lists.denx.de; u-boot@lists.denx.de
> Cc: Laurence Withers; Paulraj, Sandeep
> Subject: [PATCH v2 0/2] DA8xx: add generic GPIO driver
>
> This adds a generic GP
Hi Simon,
On Monday 18 July 2011 06:51 PM, Simon Schwarz wrote:
> Hi Aneesh,
>
> On Sat, 16 Jul 2011 18:23:19 +0530
> Aneesh V wrote:
>
>> * omap4_rev_string() reference changed to omap_rev_string()
>
>> +char omap4_rev_string[50];
> [snip]
>> +printf("\nU-Boot SPL %s (%s - %s)\n", u_boot
On Jul 18, 2011, at 7:25 AM, Wolfgang Denk wrote:
> Hi all,
>
> this to remind you that the merge window for the next release
> (v2011.09) was closed on Sun Jul 17, 2011.
>
> Release "v2011.09" is scheduled in 48 days - on September 04, 2011.
>
> You may - or may not - have noticed that I pos
On Saturday 16 July 2011 09:55 PM, Aneesh V wrote:
> OMAP4460 is the latest addition to the OMAP4 family.
> OMAP4460 has dual core Cortex-A9 CPUs that can be clocked upto
> 1.5 GHz
>
> The memory architecture has been improved to provide better
> performance and there several other minor improvemen
Hi Stefano,
Le 18/07/2011 14:45, Stefano Babic a écrit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 49473adabff703d0784f1f7457f29bde0a4893d1:
>
>am3517evm: change console device from ttyS2 to ttyO2 (2011-07-18
> 12:35:52 +0200)
>
> are available in the
Hi Wolfgang,
The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
powerpc/85xx: Add default usb mode and phy type to hwconfig
(2011-07-11 13:24:21 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert ARIBAUD (1):
Rem
Dear Wolfgang,
On Saturday 16 July 2011 06:23 PM, Aneesh V wrote:
> This series adds mmc SPL support for OMAP4. This is essentially
> an up-streaming effort for TI's x-loader for OMAP4 using the SPL
> framework
>
> This work partly draws upon previous work done for x-loader by:
> Santosh Shi
Dear Albert ARIBAUD,
In message <4e242883.5040...@aribaud.net> you wrote:
>
> > It took me longer to prepare this series, as I actually waited for the
> > last day of the merge window for any fixes to come in.
>
> Same as I did for the UTF-8 patch -- would it qualify as a bugfix? :)
It has caus
Dear Aneesh V,
In message <4e24375d.1000...@ti.com> you wrote:
>
> I think I have addressed all the comments you and others had on the
> previous series and adapted it to the new SPL framework.
Yes, I agree.
> There are just two comments for this series so far. I have to omit the
> 'SYS' from CO
>From 53afd3a38abbaed8890ca1ba36439e0c93b69969 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov
Date: Mon, 18 Jul 2011 15:44:42 +0200
Subject: [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot
device
it is not necessary to define rootfstype for mass storage devices.
Kernel detects
Albert,
Please pull u-boot-ti/master. I am working on some other patches from
Aneesh as well. I will send a pull request for that as well as
remaining u-boot-ti patches in due course of time.
Regards,
Sandeep
The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
Dear Wolfgang,
On Monday 18 July 2011 07:20 PM, Wolfgang Denk wrote:
> Dear Aneesh V,
>
> In message<4e24375d.1000...@ti.com> you wrote:
>>
>> I think I have addressed all the comments you and others had on the
>> previous series and adapted it to the new SPL framework.
>
> Yes, I agree.
>
>> The
Dear Aneesh V,
In message <4e243da5.4080...@ti.com> you wrote:
>
> One minor question. For the OMAP spl I have some cofig flags like
>
> CONFIG_SYS_SPL_STACK, CONFIG_SYS_SPL_BSS_START_ADDR etc.
>
> Is it ok to omit the 'SYS' part of these too?
Yes, please. I think we should make this consisten
Dear Wolfgang,
On Mon, Jul 18, 2011 at 2:30 PM, Wolfgang Denk wrote:
> Dear Albert ARIBAUD,
>
> In message <4e242306.1000...@aribaud.net> you wrote:
>>
>> What might bother *you*, however, is that ATM the SPL framework patches
>> are RFC, so they won't be applied as such, and Aneesh's OMAP4 patch
Hi Albert,
On 07/18/11 16:38, Albert ARIBAUD wrote:
> Igor Grinberg (1):
>arm: add CONFIG_MACH_TYPE setting and documentation
hmm... no [2/3] and [3/3]... ?
http://patchwork.ozlabs.org/patch/103048/
http://patchwork.ozlabs.org/patch/103047/
When do you plan to pull these?
--
Regards
From: "Howard D. Gray"
Signed-off-by: Michael Jones
---
Changes for v2:
- None. Resubmitting to include custodian in cc:
arch/arm/cpu/armv7/omap3/sys_info.c | 13 -
arch/arm/include/asm/arch-omap3/omap3.h | 10 ++
2 files changed, 22 insertions(+), 1 deletions(-)
Fail in 'mmc rescan' if mmc_init() returns error
Signed-off-by: Michael Jones
---
Changes for v2:
- None. Resubmitting to include custodian in cc:
common/cmd_mmc.c |6 --
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 176646d..
Doesn't make sense to provide this function to boards which defined
CONFIG_ENV_IS_NOWHERE. Such a board gets a linking error because
common/env_nowhere.c doesn't define saveenv().
Signed-off-by: Michael Jones
---
Changes for v2:
- None. Resubmitting to include custodian in cc:
board/matrix_vi
On Mon, Jul 18, 2011 at 10:32:07AM +0530, Rajashekhara, Sudhakar wrote:
> Why not remove the LPSC constants which are not used. They can be added
> as and when required.
Hi Sudhakar,
This makes sense. I'll leave it a day or two in case there are any other
comments, and then post an updated patch
Hi Daniel, Wolfgang,
On Monday 18 July 2011 07:49 PM, Daniel Schwierzeck wrote:
> Dear Wolfgang,
>
> On Mon, Jul 18, 2011 at 2:30 PM, Wolfgang Denk wrote:
>> Dear Albert ARIBAUD,
>>
>> In message<4e242306.1000...@aribaud.net> you wrote:
>>>
>>> What might bother *you*, however, is that ATM the S
This allows the EEPROM layer to send a single i2c write command
per page, and wait CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS between
i2c write commands.
Signed-off-by: Michael Jones
---
Changes for v2:
- None. Resubmitting to include custodian in cc:
drivers/i2c/omap24xx_i2c.c | 134
Hi Aneesh,
On Mon, Jul 18, 2011 at 4:54 PM, Aneesh V wrote:
>
> Probably one more small change is required in 2/9.
> CONFIG_SYS_SPL_LDSCRIPT needs to be CONFIG_SPL_LDSCRIPT for the sake of
> consistency.
>
I'll change it. Documentation is also missing for that option.
Thanks for the pointer.
Be
Hi all,
I am busy debugging a problem with the i.MX51 FEC ethernet driver, that
stopped working after upgrading u-boot. Before the upgrade I used
v2010.06-rc3, which worked fine.
I gave up on trying to find the difference beween the old version and this one
that broke it due to BSP issues, gi
This series adds mmc SPL support for OMAP4. This is essentially
an up-streaming effort for TI's x-loader for OMAP4 using the SPL
framework
This work partly draws upon previous work done for x-loader by:
Santosh Shilimkar
Rajendra Nayak
and many others
This series depends on the
The basic hardware init of OMAP4(s_init()) can happen in 4
different contexts:
1. SPL running from SRAM
2. U-Boot running from FLASH
3. Non-XIP U-Boot loaded to SDRAM by SPL
4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
Configuration Header feature
What level of hw initialization
- separate mux settings into essential and non essential parts
- essential part is board independent as of now(so move it
to SoC directory). Will help in having single SPL for all
boards.
- Non-essential part(the pins not essential for u-boot to function)
need to be phased out eventually.
- C
Signed-off-by: Aneesh V
---
V2:
* Added a revision string in addition to the revision number
Helps in printing out the OMAP revision at bootup
V3:
* Improved the revision check function by saving the
value instead of finding it every time.
* Improved revision string function by generating
Add support for:
1. DPLL locking
2. Initialization of clock domains and clock modules
3. Setting up the right voltage on voltage rails
This work draws upon previous work done for x-loader by:
Santosh Shilimkar
Rajendra Nayak
Signed-off-by: Aneesh V
---
V2:
* Use pre-calculated
Add support for the SDRAM controller (EMIF).
Signed-off-by: Aneesh V
---
V2:
* Minor corrections in do_lpddr2_init()
* Minor corrections to read_idle interval calculation
* Sanity test of memory after doing the initialization
* Fixed warnings reported with with latest GCC compilers
V3:
* Removed
- Allow SPL to have .bss disjoint from rest of the image
- Allow for .bss setup in CONFIG_SPL_BUILD case too.
- Take care of the special case where relocation offset = 0.
- Compile out exception handling code and install a simpler
vector
Signed-off-by: Aneesh V
---
V3:
* Taken care of the case
Identify SDRAM devices connected to EMIF automatically:
LPDDR2 devices have some Mode Registers that provide details
about the device such as the type, density, bus width
etc. EMIF has the capability to read these registers. If there
are no devices connected to a given chip-select reading mode
regi
Calculate EMIF register values based on AC timing parameters
from the SDRAM datasheet and the DDR frequency rather than
using the hard-coded values.
For a new board the user doen't have to go through the tedious
process of calculating the register values. Instead, just
provide the AC timings from
- Provide alternate implementations of board_init_f()
board_init_r() for OMAP spl.
- Provide linker script
- Initialize global data
- Add serial console support
- Update CONFIG_SYS_TEXT_BASE to allow for SPL's bss and move
it to board config header from config.mk
Signed-off-by: Aneesh V
---
1 - 100 of 188 matches
Mail list logo
