Hi, all.
2009/6/17 Timur Tabi
>
> Kim Phillips wrote:
>
> > based on the content of the patch:
> >
> > -/* This macro is used by RTL8139 but not defined in PPC architecture */
> >
> > I'd say 2, all ppc boards.
>
> rd2plus.h, which is an SH board, has this:
>
> /*
> * Network device (RTL8139) su
Scott Wood wrote:
> Wolfgang Denk wrote:
>> Dear "Michele De Candia (VT)",
>>
>> In message <4a37f7bf.2090...@valueteam.com> you wrote:
> this patch fixes a bug for 'nand erase' command: when bad blocks
> are present into erasing area, they were skipped but the erased
> size was updat
The following changes since commit 57fe30194d3c15c37d9ff06dbd2a4c1ffccda018:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git repository at:
git://www.denx.de/git/u-boot-blackfin.git master
Mike Frysinger (4):
Blackfin: bf548-e
Michele De Candia (VT) wrote:
> Scott Wood wrote:
>
>> Wolfgang Denk wrote:
>>
>>> Dear "Michele De Candia (VT)",
>>>
>>> In message <4a37f7bf.2090...@valueteam.com> you wrote:
>>>
>> this patch fixes a bug for 'nand erase' command: when bad blocks
>> are present into erasin
Michele De Candia (VT) wrote:
> Scott Wood wrote:
>
>> Wolfgang Denk wrote:
>>
>>> Dear "Michele De Candia (VT)",
>>>
>>> In message <4a37f7bf.2090...@valueteam.com> you wrote:
>>>
>> this patch fixes a bug for 'nand erase' command: when bad blocks
>> are present into erasin
Dear all,
The cpu/arm_cortexa8/start.S dosen't have the code about onenand_ipl.
But, If the new ARM CortexA8 specific code is addad and the new code needs
to be
used the onenand_ipl features, it's hard to be implemented this new code.
So, I wonder whether it's right or not to be changed like this
Dear Scott,
In message <4a37fe47.3030...@freescale.com> you wrote:
>
> > I see - thanks for the explanation.
> >
> > Hm... actually I think the write should fail in such a case...
> >
> > Scott, what do you think?
>
> I think the current behavior is reasonable. You're erasing a specific
> reg
Hello all,
I like to use u-boot to boot from NAND flash on a board with the i.MX31.
I found your posings about the patch series ([U-Boot] [PATCH v4 0/6] MX31: NAND
boot for PDK boards.) which I gladly like to test for my board. You wrote that
the patches apply to u-boot/next. My problem is that
Dear "Ulrich Gerster",
In message <4a38dceb024d00014...@hochblauen.ba-loerrach.de> you wrote:
>
> I found your posings about the patch series ([U-Boot] [PATCH v4 0/6] MX31:
> NAND boot for PDK boards.) which I gladly like to test for my board. You
> wrote that the patches apply to u-boot/ne
Kumar Gala wrote:
>
> On Jun 16, 2009, at 3:50 PM, Richard Retanubun wrote:
>
>> [snip]
>>> How about removing the include "netdev.h" and adding:
>>>
>>> extern int uec_standard_init(bd_t *bis);
>>>
>> D'oh!
>>
>> diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
>> index c4331ae..f29b848 10064
On Jun 17, 2009, at 7:27 AM, Richard Retanubun wrote:
> Kumar Gala wrote:
>> On Jun 16, 2009, at 3:50 PM, Richard Retanubun wrote:
>>> [snip]
How about removing the include "netdev.h" and adding:
extern int uec_standard_init(bd_t *bis);
>>> D'oh!
>>>
>>> diff --git a/cpu/mpc8
cpu.c: In function 'cpu_eth_init':
cpu.c:371: warning: implicit declaration of function 'uec_standard_init'
Signed-off-by: Kumar Gala
---
include/netdev.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/netdev.h b/include/netdev.h
index aed5c4c..92eceb1 100644
--
On Jun 16, 2009, at 3:50 PM, Richard Retanubun wrote:
> [snip]
>> How about removing the include "netdev.h" and adding:
>>
>> extern int uec_standard_init(bd_t *bis);
>>
> D'oh!
>
> diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
> index c4331ae..f29b848 100644
> --- a/cpu/mpc83xx/cpu.c
> +++
On Jun 17, 2009, at 8:22 AM, Kumar Gala wrote:
> cpu.c: In function 'cpu_eth_init':
> cpu.c:371: warning: implicit declaration of function
> 'uec_standard_init'
>
> Signed-off-by: Kumar Gala
> ---
> include/netdev.h |1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/i
Does anyone have experience with uboot debugging in CodeWarrior through
USB TAP Controller (Freescale)?
Best Regards
R.K.
-Original Message-
From: Wolfgang Denk [mailto:w...@denx.de]
Sent: Tuesday, June 16, 2009 8:14 PM
To: Kysilka Radek
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] Com
David Hawkins wrote:
>> I see you guys talking about BDI3000 and I decided to ask a related
>> question.
>>
>> Those who happen to own MPC8548CDS or something like this know it comes with
>> a small box called CodeWarrior USB TAP.
>>
>> It is supposed to work with their software one has to pay for.
Signed-off-by: Grzegorz Bernacki
---
include/configs/digsy_mtc.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index 558010f..6ccebfa 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@
The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet driver, but
the code that used that macro was removed over a year ago, so board
configuration files no longer need to define it.
The _IO_BASE macro is also automatically defined to 0 if it isn't already set,
so there's no need to de
On Wed, 17 Jun 2009, Wolfgang Denk wrote:
> Dear David Hawkins,
>
> In message <4a382998.4010...@ovro.caltech.edu> you wrote:
> >
> > The USB-TAP has a PowerPC processor in it ... so even if you
> > had to blow away the original firmware, I'm sure it wouldn't
> > be too hard to figure out what c
On Wed, Jun 17, 2009 at 09:44:41AM +0200, Michele De Candia (VT) wrote:
> Moreover, I think that if you want to erase a specific NAND area, the
> correct way to use 'nand erase' command would be:
>
> 'nand erase start end'
>
> If you want to erase an area but you want to be sure that 'size' byte
Hi Jerry,
>> That being said, a weekend with a logic analyzer on a
>> BDI2000 JTAG connection would probably give you all the
>> info you need to figure out the appropriate JTAG
>> commands.
>
> The problem is that it is going to be different for every processor
> family and it may even change b
Scott Wood wrote:
> On Wed, Jun 17, 2009 at 09:44:41AM +0200, Michele De Candia (VT) wrote:
>
>> Moreover, I think that if you want to erase a specific NAND area, the
>> correct way to use 'nand erase' command would be:
>>
>> 'nand erase start end'
>>
>> If you want to erase an area but you w
This patch fixes a compilation warning for some Ethernet PHY-less PPC4xx
platforms (440SPE based ones) and a potential compilation error for 440SP
platforms (use of undefined 'ethgroup' variable). In the original code and in
case of 440SPE platforms, 'ethgroup' is initialized to -1 and never m
Hi Riverful,
HeungJun Kim wrote:
> Dear all,
> The cpu/arm_cortexa8/start.S dosen't have the code about onenand_ipl.
> But, If the new ARM CortexA8 specific code is addad and the new code needs
> to be
> used the onenand_ipl features, it's hard to be implemented this new code.
>
> So, I wonder wh
Add WATCHDOG_REFRESH() inside nand write and read
--
Giulio Benetti
R&D
Micronova srl
diff -urpN u-boot-2009.03.orig/drivers/mtd/nand/nand_util.c u-boot-2009.03/drivers/mtd/nand/nand_util.c
--- u-boot-2009.03.orig/drivers/mtd/nand/nand_util.c 2009-03-21 22:04:41.0 +0100
+++ u-boot-2009.
2009/6/17 Wolfgang Denk :
> Dear "Ulrich Gerster",
>
> In message <4a38dceb024d00014...@hochblauen.ba-loerrach.de> you wrote:
>>
>> I found your posings about the patch series ([U-Boot] [PATCH v4 0/6] MX31:
>> NAND boot for PDK boards.) which I gladly like to test for my board. You
>> wrote t
Greetings,
Trying to make the hp jornada 700 flashboard u-boot friendly. Anyhow, the
compilation
goes well until the last step where it spits out an :
arm-linux-ld:/home/kristoffer/work/projects/u-boot.git/cpu/sa1100/u-boot.lds:42:
Greetings,
Our board have one PHY's SMI attached via GPIO (bitBang SMI)
and the other network device (a switch) connected to the 8360e's real SMI
controller.
This patch aims to make u-boot able to use both at the same time. I am checking
if I am
on the right track and if I have missed something
On Wed, 17 Jun 2009 10:34:55 -0500
Timur Tabi wrote:
> The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet driver, but
> the code that used that macro was removed over a year ago, so board
> configuration files no longer need to define it.
>
> The _IO_BASE macro is also automatical
On 22:11 Wed 17 Jun , Kristoffer Ericson wrote:
> Greetings,
>
> Trying to make the hp jornada 700 flashboard u-boot friendly. Anyhow, the
> compilation
> goes well until the last step where it spits out an :
>
> arm-linux-ld:/home/kristoffer/work/projects/u-boot.git/cpu/sa1100/u-boot.lds:42
Michele De Candia (VT) wrote:
>> I'm a little uneasy about changing the normal erase command from size
>> to end
>> -- it would break existing uses. Though, it would make it consistent
>> with
>> the NOR erase command. Perhaps a period where it warns but accepts
>> anyway a
>> size, if the sec
Dear Scott,
In message <20090617155421.gb6...@loki.buserror.net> you wrote:
> > If you want to erase an area but you want to be sure that 'size' bytes
> > were erased, you should use:
> >
> > 'nand erase off size'
>
> How would the "nand erase" command reliably distinguish between the two
> a
Dear Scott,
In message <4a39685f.6030...@freescale.com> you wrote:
>
> Hmm... perhaps check the alignment? If "end" is supposed to be the last
> to-be-erased byte, not the first not-to-be-erased byte, then if the low
> bits are 0 it's a size (and gets a warning) and if they're 1 it's an end?
Hi Johan,
> Seems like that was the trick. After removing the breakout board it
> works much better.
>
> I still got some problems which I don't know if its software related.
> Sometimes when I power on the board the ethernet LEDs does not turn
> green and the network does not work. If I power cyc
How about something like this ?
It is all done in #define's and follows what the kernel does.
The clocks are
I2C_IP_CLK
I2C_INTERNAL_SAMPLING_CLK
The scll and sclh can be modifed by
I2C_SCLL_TRIM
I2C_SCLH_TRIM
Tom
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 09:02 Thu 11 Jun , Tom wrote:
Wolfgang Denk wrote:
> Dear Scott,
>
> In message <4a39685f.6030...@freescale.com> you wrote:
>> Hmm... perhaps check the alignment? If "end" is supposed to be the last
>> to-be-erased byte, not the first not-to-be-erased byte, then if the low
>> bits are 0 it's a size (and gets a warning) and
Because this function is soc specific, it should be moved to omap3
Signed-off-by: Minkyu Kang
---
cpu/arm_cortexa8/omap3/interrupts.c | 14 ++
cpu/arm_cortexa8/start.S| 14 --
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/cpu/arm_cortexa
Richiesta di autorizzazione all'invio dell'email
L'Altra Dimensione esegue lavori di Ristrutturazione, imbiancature,
controsoffittature,
decorazione, coibentazioni termoacustici, trattamenti antimuffa, canne fumarie
ecc...
Fornitura e posa di parquet, porte,finestre, zanzariere, sanitari,
Current MDs in the United States
Physicians in many different specialties
Over a dozen sortable fields
Price for this week only = $393
{}{}{} A gift to you when you purchase, receive these 4 databases below !!!
++> Alternative Medicine
** Psychologists
-> Physical Therapists
--> Nur
Kumar Gala wrote:
> cpu.c: In function 'cpu_eth_init':
> cpu.c:371: warning: implicit declaration of function 'uec_standard_init'
>
> Signed-off-by: Kumar Gala
> ---
> include/netdev.h |1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/include/netdev.h b/include/netdev.
Kim Phillips wrote:
> fix this gcc 4.4 warning:
>
> tsec.c: In function 'tsec_init':
> tsec.c:200: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
>
> Signed-off-by: Kim Phillips
> ---
> drivers/net/tsec.c |5 -
> 1 files changed, 4 insertions(+), 1 deletion
David,
David Brownell wrote:
> CSB337 boards originally shipped with MicroMonitor, not U-Boot;
> and with a version using a different convention for recording
> Ethernet addresses than anyone else. To avoid breaking Linux
> when it uses U-Boot, have it use the same convention on that
> hardware.
Dear Dirk,
2009/6/18 Minkyu Kang
> Because this function is soc specific, it should be moved to omap3
>
> Signed-off-by: Minkyu Kang
> ---
> cpu/arm_cortexa8/omap3/interrupts.c | 14 ++
> cpu/arm_cortexa8/start.S| 14 --
> 2 files changed, 14 insertions(
43 matches
Mail list logo
