On Fri, Aug 11, 2017 at 09:46:05AM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_BCH
>
> Signed-off-by: Adam Ford
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
__
On Fri, Aug 11, 2017 at 08:51:20AM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_SPL_OMAP3_ID_NAND
>
> Signed-off-by: Adam Ford
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Fri, Aug 11, 2017 at 06:39:34AM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_SYS_I2C_BUS_MAX
>
> Signed-off-by: Adam Ford
> Reviewed-by: Heiko Schocher
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Fri, Aug 11, 2017 at 06:39:13AM -0500, Adam Ford wrote:
> For consistency with other platforms and in preparation of Kconfig
> migration, let's change Several TI platforms that use I2C_BUS_MAX
> to CONFIG_SYS_I2C_BUS_MAX
>
> Signed-off-by: Adam Ford
Applied to u-boot/master, thanks!
--
Tom
CONFIG_NAND_DENALI select's CONFIG_SYS_NAND_SELF_INIT, so the
NAND initialization process is driven by the driver itself.
CONFIG_SYS_NAND_MAX_CHIPS and CONFIG_SYS_NAND_BASE are unused.
Signed-off-by: Masahiro Yamada
---
include/configs/socfpga_common.h | 2 --
1 file changed, 2 deletions(-)
di
This converts the following to Kconfig:
CONFIG_NAND_OMAP_GPMC
CONFIG_NAND_OMAP_GPMC_PREFETCH
CONFIG_NAND_OMAP_ELM
CONFIG_SPL_NAND_AM33XX_BCH
CONFIG_SPL_NAND_SIMPLE (ARCH_OMAP2PLUS only)
Signed-off-by: Adam Ford
---
V4: Fix missing data from V2-V3
V3: Remove selection from CMD_NAND
On Fri, Sep 1, 2017 at 4:54 PM, Tom Rini wrote:
> On Sat, Aug 12, 2017 at 09:38:08PM -0500, Adam Ford wrote:
>
>> This converts the following to Kconfig:
>>CONFIG_NAND_OMAP_GPMC
>>CONFIG_NAND_OMAP_GPMC_PREFETCH
>>CONFIG_NAND_OMAP_ELM
>>CONFIG_SYS_NAND_BUSWIDTH_16BIT
>>CONFIG_SP
On September 1, 2017 12:25:44 PM PDT, Fabio Estevam wrote:
>On Fri, Sep 1, 2017 at 3:54 PM, Fabio Estevam
>wrote:
>
>> I have tested this method and it works, thanks.
>>
>> Do you plan to usptream this method?
>
>Or I can also put your patch as part of my series that adds SDP
>support for imx6q
On Sat, Aug 12, 2017 at 09:38:08PM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_NAND_OMAP_GPMC
>CONFIG_NAND_OMAP_GPMC_PREFETCH
>CONFIG_NAND_OMAP_ELM
>CONFIG_SYS_NAND_BUSWIDTH_16BIT
>CONFIG_SPL_NAND_AM33XX_BCH
>CONFIG_SPL_NAND_SIMPLE (ARCH_OMAP2P
On Fri, Sep 01, 2017 at 04:01:58PM +0800, Yang, Wenyou wrote:
> Hi,
>
> Do you have any comments?
>
>
> On 2017/8/3 9:00, Wenyou Yang wrote:
> >This option is an SPL-variant of the I2C_EEPROM option to enable
> >the driver for generic I2C-attached EEPROMs for SPL.
> >
> >Signed-off-by: Wenyou Ya
On 8/31/2017 4:13 PM, Troy Kisky wrote:
> On 8/31/2017 4:04 PM, Eric Nelson wrote:
>> On 08/31/2017 03:53 PM, Troy Kisky wrote:
>>> On 8/31/2017 2:28 PM, Troy Kisky wrote:
>>>
Maybe if you change the WDOG pinmux it might work ?
>>>
>>> Worked for me
>>>
>>> => mm.l 302c
>>>
On Fri, Aug 25, 2017 at 05:50:27PM -0400, Tom Rini wrote:
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Fri, Aug 25, 2017 at 05:50:26PM -0400, Tom Rini wrote:
> This syncs all of the currently Kconfig'd symbols out of the headers and
> into the defconfig files. This has two exceptions, first am335x_evm
> needs to be converted to DM in SPL and then it can stop undef'ing
> CONFIG_DM_USB. Leaving
On Fri, Sep 01, 2017 at 12:57:56PM -0400, Tom Rini wrote:
> On Fri, Sep 01, 2017 at 06:50:46PM +0200, Anatolij Gustschin wrote:
>
> > Hi Tom,
> >
> > Please pull to fixes for v2017.09.
> >
> > The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
> >
> > mtdparts: Fix u
On Fri, Sep 1, 2017 at 3:54 PM, Fabio Estevam wrote:
> I have tested this method and it works, thanks.
>
> Do you plan to usptream this method?
Or I can also put your patch as part of my series that adds SDP
support for imx6qsabresd if you prefer.
___
Hi Stefan,
On Fri, Sep 1, 2017 at 3:19 PM, Stefan Agner wrote:
> That is the issue I am describing here:
> https://lists.denx.de/pipermail/u-boot/2017-August/301952.html
>
> Either enter recovery mode explicitly (by setting the BMODE pins or
> using the bmode command)
On imx6qsabresd it is not
On 2017-09-01 09:48, Fabio Estevam wrote:
> Hi Stefan,
>
> On Wed, Aug 16, 2017 at 3:00 PM, Stefan Agner wrote:
>> From: Stefan Agner
>>
>> This series adds NXP's Serial Download Protocol (SDP) support via
>> USB for SPL/U-Boot. It allows to download U-Boot via USB from a
>> (recovered) SPL usin
On Fri, Sep 01, 2017 at 10:40:59PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull these fixes.
>
> thanks!
> Jagan.
>
> The following changes since commit ead3697d7ec491c055fe546b3a45bcfba45fa022:
>
> mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
>
> are availabl
On Fri, Sep 1, 2017 at 9:41 PM, Adam Ford wrote:
> With DM now enabled with the device tree pulled from Linux, we can
> enable DM_I2C in U-Boot.
>
> Signed-off-by: Adam Ford
>
> V2: New to series
> ---
Reviewed-by: Jagan Teki
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-B
On Fri, Sep 1, 2017 at 9:41 PM, Adam Ford wrote:
> There is a discrepency between U-Boot and Linux on the partition map.
> This enabes the MTD parts to pass MTD partition information from U-Boot to
> Linux. Linux already has a pending patch to enable MTD PARTS in
> davinci_all_defconfig
>
> Signe
On Fri, Sep 1, 2017 at 9:41 PM, Adam Ford wrote:
> With the device tree ported and DM compatible drivers, enable:
> OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL
>
> Signed-off-by: Adam Ford
> ---
Reviewed-by: Jagan Teki
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot,
On Fri, Sep 1, 2017 at 9:41 PM, Adam Ford wrote:
> The DM support is already in the driver, so add
> da830-spi to the compatible list.
>
> Signed-off-by: Adam Ford
> ---
I think you missed, last version r-w-b ?
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Ups
On Fri, Sep 1, 2017 at 8:53 PM, Jagan Teki wrote:
> From: Dave Prue
>
> SUNXI_GMAC was still used to configure the code where as the
> same has been renamed and moved to Kconfig in below commit
> "sunxi: Move SUNXI_GMAC to Kconfig"
> (sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb)
>
> Signed-off
Hi Tom,
Please pull these fixes.
thanks!
Jagan.
The following changes since commit ead3697d7ec491c055fe546b3a45bcfba45fa022:
mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to
On Fri, Sep 01, 2017 at 06:50:46PM +0200, Anatolij Gustschin wrote:
> Hi Tom,
>
> Please pull to fixes for v2017.09.
>
> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
>
> mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
>
> are available in
Hi Tom,
Please pull to fixes for v2017.09.
The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-video.git master
for you to fetch c
On Fri, Sep 1, 2017 at 10:12 PM, Tom Rini wrote:
> On Tue, Aug 29, 2017 at 12:57:43PM +0530, Jagan Teki wrote:
>
>> Hi Tom,
>>
>> These fixes need to be in for the release, please pull the same.
>>
>> thanks!
>> Jagan.
>>
>> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac5734
Hi Stefan,
On Wed, Aug 16, 2017 at 3:00 PM, Stefan Agner wrote:
> From: Stefan Agner
>
> This series adds NXP's Serial Download Protocol (SDP) support via
> USB for SPL/U-Boot. It allows to download U-Boot via USB from a
> (recovered) SPL using the same tools used to download SPL itself
> (speci
On Wed, Aug 30, 2017 at 12:35:02PM +0200, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 90ae53ce1ae665a1b43ecf5ccafc339839392427:
>
> fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long (2017-08-22
> 08:20:02 -0400)
>
>
On Wed, Aug 30, 2017 at 10:06:30AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull this last minute fix from Chris, which is needed
> to get SPI NOR working on current master.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
>
> mt
On Wed, Aug 30, 2017 at 09:22:33AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
> Here is a bit volume pull request, but changes
> are SoC-specific except the ofnode patch and denali_dt.
> The latter is reviewed by Simon.
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Di
On Tue, Aug 29, 2017 at 12:57:43PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> These fixes need to be in for the release, please pull the same.
>
> thanks!
> Jagan.
>
> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
>
> mtdparts: Fix uninitialized scalar usage (2017-
With DM now enabled with the device tree pulled from Linux, we can
enable DM_I2C in U-Boot.
Signed-off-by: Adam Ford
V2: New to series
---
arch/arm/dts/da850-evm-u-boot.dtsi | 1 +
configs/da850evm_defconfig | 3 +++
include/configs/da850evm.h | 5 +++--
3 files changed, 7 inser
There is a discrepency between U-Boot and Linux on the partition map.
This enabes the MTD parts to pass MTD partition information from U-Boot to
Linux. Linux already has a pending patch to enable MTD PARTS in
davinci_all_defconfig
Signed-off-by: Adam Ford
V2: This patch is new to the series
--
The DM support is already in the driver, so add
da830-spi to the compatible list.
Signed-off-by: Adam Ford
---
drivers/spi/davinci_spi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index 291ef95..eda252d 100644
--- a/drivers/spi/davin
With the device tree ported and DM compatible drivers, enable:
OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL
Signed-off-by: Adam Ford
---
configs/da850evm_defconfig | 9 +++--
include/configs/da850evm.h | 17 +++--
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a
This series adds the DA850-evm device tree and related dependant files, along
with enabling DM_SPI, DM_SERIAL, and DM_SPI with DM_SPIFLASH.
This is a resend of the original series. The only real change to this series
from V1 is the additional adding of MTD PARTS and I2C.
Adam Ford (4):
spi:
On Wed, Aug 30, 2017 at 10:09:27PM +0100, Peter Robinson wrote:
> On Wed, Aug 30, 2017 at 9:31 AM, Tuomas Tynkkynen
> wrote:
> > Hi,
> >
> > Sending this out in a slightly unfinished state to gauge if there's
> > interest in having this included in U-Boot. Basically this allows
> > running U-Boot
From: Dave Prue
SUNXI_GMAC was still used to configure the code where as the
same has been renamed and moved to Kconfig in below commit
"sunxi: Move SUNXI_GMAC to Kconfig"
(sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb)
Signed-off-by: Dave Prue
Reviewed-by: Simon Glass
Reviewed-by: Jagan Teki
On Thu, Aug 31, 2017 at 03:16:17PM +0200, Felix Brack wrote:
> Boards using the single-register-pin-controller can configure all
> pins by means of the device tree. This renders the implementation of
> the two functions set_uart_mux_conf and set_mux_conf_regs obsolete.
> Using the weak attribute
On Thu, Aug 31, 2017 at 08:52:34PM +0800, Simon Glass wrote:
> Hi Alex,
>
> On 28 August 2017 at 18:10, Alexander Graf wrote:
> >
> >
> >> Am 26.08.2017 um 19:43 schrieb Simon Glass :
> >>
> >> This is currently disabled, so USB keyboards are not detected in U-Boot.
> >> Enable this option to fix
On Wed, Aug 30, 2017 at 04:16:34AM +0800, Simon Glass wrote:
> Hi,
>
> On 29 August 2017 at 22:16, Rob Clark wrote:
> > On Tue, Aug 29, 2017 at 8:57 AM, Leif Lindholm
> > wrote:
> >> On Tue, Aug 29, 2017 at 02:26:48PM +0200, Alexander Graf wrote:
> >>> > > > I would add command
> >>> > > > boot
On Fri, Sep 1, 2017 at 8:03 PM, Jagan Teki wrote:
> On Thu, Aug 31, 2017 at 10:51 PM, Lionel Koenig
> wrote:
>> Following 4d43d065db3262f9a9918ba72457bf36dfb8e0bb,
>> SUNXI_GMAC was still used to configure the code while
>> SUN7I_GMAC was used in the configuration tools.
>>
>> Signed-off-by: Lio
On Fri, Sep 1, 2017 at 9:25 AM, Sekhar Nori wrote:
> Hi Adam,
>
> On Wednesday 30 August 2017 04:07 PM, Adam Ford wrote:
>> On Wed, Aug 30, 2017 at 12:30 AM, Sekhar Nori wrote:
>>> On Wednesday 30 August 2017 08:07 AM, Adam Ford wrote:
On Tue, Aug 29, 2017 at 8:05 AM, Adam Ford wrote:
>
On Fri, Sep 1, 2017 at 5:23 PM, Hannes Schmelzer wrote:
> Hi Eldor,
>
> just found your post in the mailinglist.
>
> https://lists.denx.de/pipermail/u-boot/2016-December/276491.html
>
> Reason why i'm searched there is, that i've now excactly same problem as
> you.
Can you give some details, issu
On Thu, Aug 31, 2017 at 10:51 PM, Lionel Koenig wrote:
> Following 4d43d065db3262f9a9918ba72457bf36dfb8e0bb,
> SUNXI_GMAC was still used to configure the code while
> SUN7I_GMAC was used in the configuration tools.
>
> Signed-off-by: Lionel Koenig
> ---
> arch/arm/include/asm/arch-sunxi/sys_prot
This field is no longer used since the DM conversion. Drop it.
Signed-off-by: Tuomas Tynkkynen
---
drivers/pci/pci_tegra.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c
index cb5cf8b043..7d920d423d 100644
--- a/drivers/pci/pci_tegra.c
+++
This field is no longer used since the DM conversion. Drop it.
Signed-off-by: Tuomas Tynkkynen
---
drivers/pci/pcie_layerscape.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/pci/pcie_layerscape.h b/drivers/pci/pcie_layerscape.h
index 782e3ab7ad..3a6cecb07d 100644
--- a/drivers/pci/
'default n' is the default anyway so it doesn't need to be specified
explicitly, and the rest of the file doesn't specify it either anywhere.
Drop it.
Signed-off-by: Tuomas Tynkkynen
---
drivers/pci/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kcon
This field has never been used as the driver has been DM-based since the
beginning. Drop it.
Signed-off-by: Tuomas Tynkkynen
---
drivers/pci/pcie_xilinx.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
index e31ba8bd51..4ba32df516 10064
These take the 'struct udevice *' as an argument, not the
'struct xilinx_pcie *` which is a local variable. Fix the comments to
match the code.
Signed-off-by: Tuomas Tynkkynen
---
drivers/pci/pcie_xilinx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pcie_x
Hi Adam,
On Wednesday 30 August 2017 04:07 PM, Adam Ford wrote:
> On Wed, Aug 30, 2017 at 12:30 AM, Sekhar Nori wrote:
>> On Wednesday 30 August 2017 08:07 AM, Adam Ford wrote:
>>> On Tue, Aug 29, 2017 at 8:05 AM, Adam Ford wrote:
On Tue, Aug 29, 2017 at 6:41 AM, Sekhar Nori wrote:
> O
On Thu, Aug 31, 2017 at 7:36 PM, Jagan Teki wrote:
> On Thu, Aug 31, 2017 at 7:34 PM, Maxime Ripard
> wrote:
>> On Thu, Aug 31, 2017 at 09:57:48PM +0800, Chen-Yu Tsai wrote:
>>> When enabling the new mmc timing mode, we inadvertently clear all the
>>> remaining bits in the new timing mode registe
On Tue, Aug 29, 2017 at 02:44:07PM +1000, Jonathan Gray wrote:
> On Mon, Aug 28, 2017 at 10:56:52PM -0400, Tom Rini wrote:
> > Hey all,
> >
> > It's release day and v2017.09-rc3 is out. I think there's still a few
> > outstanding important bugfixes that need to come in, and probably a few
> > mor
On Thu, Aug 31, 2017 at 10:45 AM, Leif Lindholm
wrote:
> On Wed, Aug 30, 2017 at 08:59:31AM +0100, Leif Lindholm wrote:
>> On Wed, Aug 30, 2017 at 12:03:16AM +0200, Heinrich Schuchardt wrote:
>> > I am able to provide a test application that will cover the API
>> > functions that I have focused on
On Thu, Aug 31, 2017 at 10:45 AM, Leif Lindholm
wrote:
> On Wed, Aug 30, 2017 at 08:59:31AM +0100, Leif Lindholm wrote:
>> On Wed, Aug 30, 2017 at 12:03:16AM +0200, Heinrich Schuchardt wrote:
>> > I am able to provide a test application that will cover the API
>> > functions that I have focused on
Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber
if we have a serial#") "fastboot devices" stopped to show correct device
serial number for TI boards, showing this line instead:
fastboot
This is because serial# env variable could be set after g_dnl ga
On 1 September 2017 at 15:00, Sam Protsenko wrote:
> Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber
> if we have a serial#") "fastboot devices" stopped to show correct device
> serial number for TI boards, showing this line instead:
>
> fastboot
>
>
On Fri, Sep 1, 2017 at 6:34 AM, Sekhar Nori wrote:
> On Sunday 27 August 2017 01:46 AM, Adam Ford wrote:
>> A few small additional items are needed to support DM_SPI and
>> DM_SERIAL, so those were added to da850-evm-u-boot.dtsi
>>
>> Signed-off-by: Adam Ford
>> ---
>> arch/arm/dts/da850-evm-u-b
> From: Lionel Koenig
> Date: Thu, 31 Aug 2017 19:21:01 +0200
>
> Following 4d43d065db3262f9a9918ba72457bf36dfb8e0bb,
> SUNXI_GMAC was still used to configure the code while
> SUN7I_GMAC was used in the configuration tools.
>
> Signed-off-by: Lionel Koenig
Reviewed-by: Mark Kettenis
This is
On 1 September 2017 at 14:58, Sam Protsenko wrote:
> On 1 September 2017 at 11:19, Marek Vasut wrote:
>> On 08/31/2017 08:20 PM, Sam Protsenko wrote:
>>> Since 842778a09104 commit, "fastboot devices" stopped to show correct
>>> device serial number for TI boards, showing this line instead:
>>>
>>
Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber
if we have a serial#") "fastboot devices" stopped to show correct device
serial number for TI boards, showing this line instead:
fastboot
This is because serial# env variable could be set after g_dnl ga
On 1 September 2017 at 11:19, Marek Vasut wrote:
> On 08/31/2017 08:20 PM, Sam Protsenko wrote:
>> Since 842778a09104 commit, "fastboot devices" stopped to show correct
>> device serial number for TI boards, showing this line instead:
>>
>> fastboot
>>
>> This is because seri
Hi Eldor,
just found your post in the mailinglist.
https://lists.denx.de/pipermail/u-boot/2016-December/276491.html
Reason why i'm searched there is, that i've now excactly same problem as
you.
I'm using most current mainline u-boot.
did you ever found some solution for your tro
On Sunday 27 August 2017 01:46 AM, Adam Ford wrote:
> A few small additional items are needed to support DM_SPI and
> DM_SERIAL, so those were added to da850-evm-u-boot.dtsi
>
> Signed-off-by: Adam Ford
> ---
> arch/arm/dts/da850-evm-u-boot.dtsi | 22 ++
> arch/arm/dts/da850-evm.dts | 3
Hi,
Is there a document somewhere describing how to program the Arria10 dev kit
with the u-boot-with-spl.sfp image? This is the image built from the 'next'
branch from http://git.denx.de/?p=u-boot/u-boot-socfpga.git using:
$ make socfpga_arria10_defconfig
$ make
The image is too large to be wrappe
This patch adjusts memory map for images on LS1012A
as per below memory map:
Image Flash Offset
RCW+PBI 0x
Boot firmware (U-Boot) 0x0010
Boot firmware Environment 0x0030
Signed-off-
Hi,
On 08/31/2017 09:51 AM, Bin Meng wrote:
Hi Tuomas,
On Wed, Aug 30, 2017 at 4:31 PM, Tuomas Tynkkynen
wrote:
QEMU emulates such a device with '-machine virt,highmem=off' on ARM.
The 'highmem=off' part is required for things to work as the PCI code
in U-Boot doesn't seem to support 64-bit B
Hi,
Checking all nand chip is necessary and some of NAND host implement
cmd_ctrl() from cmdfunc( ).
The select_chip() is required.
===
diff --git a/cmd/nand.c b/cmd/nand.c
index 5b9d4b3..a7c781a 100644
--- a/cmd/nand.c
Following 4d43d065db3262f9a9918ba72457bf36dfb8e0bb,
SUNXI_GMAC was still used to configure the code while
SUN7I_GMAC was used in the configuration tools.
Signed-off-by: Lionel Koenig
---
arch/arm/include/asm/arch-sunxi/sys_proto.h | 2 +-
board/sunxi/Makefile| 2 +-
inclu
Hi,
On 08/31/2017 09:55 AM, Bin Meng wrote:
Hi Tuomas,
On Wed, Aug 30, 2017 at 4:31 PM, Tuomas Tynkkynen
wrote:
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:
qemu-system-arm -machine virt,highmem=off -bios u-boot
On 28 August 2017 at 16:50, Chris Packham wrote:
> This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
> Update defconfigs.
>
> Signed-off-by: Chris Packham
> ---
>
> Changes in v3: None
> Changes in v2:
> - add imply for TARGET_NITROGEN6X, ARCH_EXYNOS5 and X86
>
> arch/Kcon
On 09/01/2017 11:51 AM, Marek Vasut wrote:
On 09/01/2017 10:36 AM, Łukasz Majewski wrote:
On 09/01/2017 10:19 AM, Marek Vasut wrote:
On 08/31/2017 08:20 PM, Sam Protsenko wrote:
Since 842778a09104 commit, "fastboot devices" stopped to show correct
device serial number for TI boards, showing th
On 09/01/2017 10:36 AM, Łukasz Majewski wrote:
> On 09/01/2017 10:19 AM, Marek Vasut wrote:
>> On 08/31/2017 08:20 PM, Sam Protsenko wrote:
>>> Since 842778a09104 commit, "fastboot devices" stopped to show correct
>>> device serial number for TI boards, showing this line instead:
>>>
>>> ??
On Tue, Aug 29, 2017 at 3:49 PM, Stefan Roese wrote:
> On 29.08.2017 07:09, Bin Meng wrote:
>>
>> It was noticed a few times, that the reboot from Linux (reboot command)
>> is different from the reboot (reset command) under U-Boot. The U-Boot
>> version does seem to reset the board more deeply (PC
On Sun, Aug 27, 2017 at 4:00 PM, Stefan Roese wrote:
> On 27.08.2017 04:22, Bin Meng wrote:
>>
>> The atomic preop register can only be written when SPI settings are
>> not locked, otherwise it's read-only.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> drivers/spi/ich.c | 3 ++-
>> 1 file changed
On Sun, Aug 27, 2017 at 4:00 PM, Stefan Roese wrote:
> On 27.08.2017 04:22, Bin Meng wrote:
>>
>> In ich_spi_xfer() when the driver presets control fields, control
>> variable gets assigned twice. Apparently only the last assignment
>> takes effect. Remove the other one.
>>
>> Signed-off-by: Bin M
> On 1 Sep 2017, at 10:57, Chris Packham wrote:
>
> Add support for reading a list of bouncing addresses from a in-tree file
> (doc/bounces) and from the ~/.patman config file. These addresses are
> stripped from the Cc list.
>
> Signed-off-by: Chris Packham
> Reviewed-by: Simon Glass
Review
Add support for reading a list of bouncing addresses from a in-tree file
(doc/bounces) and from the ~/.patman config file. These addresses are
stripped from the Cc list.
Signed-off-by: Chris Packham
Reviewed-by: Simon Glass
---
This version supports an in-tree doc/bounces file as well as a secti
On 09/01/2017 10:19 AM, Marek Vasut wrote:
On 08/31/2017 08:20 PM, Sam Protsenko wrote:
Since 842778a09104 commit, "fastboot devices" stopped to show correct
device serial number for TI boards, showing this line instead:
fastboot
This is because serial# env variable cou
Create board/$(VENDOR)/common folder to accommodate the common code
shared by other atmel boards, now put the code to set ethernet mac
address from eeprom, which uses the i2c eeprom driver.
Signed-off-by: Wenyou Yang
---
Changes in v4:
- Follow up the env function renaming.
Changes in v3: None
Add the code to set the ethernet mac address from eeprom by using
the common code from the common folder.
Signed-off-by: Wenyou Yang
---
Changes in v4:
- Rebase the latest commit(8b3cec7da) on uboot/master.
Changes in v3:
- remove CONFIG_SPL_I2C_SUPPORT=y from the default configuration files.
Replace the code to set the ethernet mac address with the code from
the common folder.
Signed-off-by: Wenyou Yang
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/dts/at91-sama5d2_xplained.dts | 5 +++
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 46 +++--
> -Original Message-
> From: York Sun
> Sent: Friday, September 01, 2017 4:38 AM
> To: Sumit Garg ; u-boot@lists.denx.de
> Cc: Ruchika Gupta ; Prabhakar Kushwaha
> ; Mingkai Hu ;
> Shengzhou Liu
> Subject: Re: [PATCH] arm64: ls1043ardb: Add distro secure boot support
>
> On 06/04/2017 11:
Create board/$(VENDOR)/common folder to accommodate the common code
for the boards from atmel. Now put the code to set the ethernet mac
address here, using the function to set the ethernet mac address
on sama5d2 and sama5d4 Xplained boards.
Changes in v4:
- Follow up the env function renaming.
-
Enable support for loadables in SEC firmware FIT image. Currently support
is added for single loadable image.
Brief description of implementation:
- Add two more address pointers (loadable_h, loadable_l) as arguments to
sec_firmware_init() api.
- Create new api: sec_firmware_checks_copy_loadable
Change DDR allocated for secure memory from 2 MB to 66 MB. This additional
64 MB secure memory is required for trusted OS running in Trusted Execution
Environment using ARMv8 TrustZone.
Signed-off-by: Sumit Garg
---
arch/arm/include/asm/arch-fsl-layerscape/config.h | 2 +-
1 file changed, 1 inse
On 08/31/2017 08:20 PM, Sam Protsenko wrote:
> Since 842778a09104 commit, "fastboot devices" stopped to show correct
> device serial number for TI boards, showing this line instead:
>
> fastboot
>
> This is because serial# env variable could be set after g_dnl gadget was
> i
On 01.09.17 03:45, Heinrich Schuchardt wrote:
On 08/31/2017 04:01 PM, Alexander Graf wrote:
On 08/27/2017 12:51 AM, Heinrich Schuchardt wrote:
8 protocols per efi_object is insufficient for iPXE.
Signed-off-by: Heinrich Schuchardt
---
include/efi_loader.h | 4 ++--
1 file changed, 2 in
Hi
On 2017/7/31 14:02, Wenyou Yang wrote:
Add a common code to display the company's logo and board information
by using the API from DM_VIDEO under the board/$(VENDOR)/common
folder, and the logo files can be used by the API from DM_VIDEO, and
then convert the board to enable the driver model s
Hi,
Can be accepted?
On 2017/7/31 11:25, Wenyou Yang wrote:
Add the compatibles to support the I2C EEPROM 24AA02E48 and AT24MAC402
respectively.
- microchip,24aa02e48
- atmel,24mac402
Wenyou Yang (2):
misc: i2c_eeprom: Add compatible for 24AA02E48
misc: i2c_eeprom: Add compatible f
Hi,
Do you have any comments?
On 2017/8/3 9:00, Wenyou Yang wrote:
This option is an SPL-variant of the I2C_EEPROM option to enable
the driver for generic I2C-attached EEPROMs for SPL.
Signed-off-by: Wenyou Yang
---
drivers/misc/Kconfig | 8
drivers/misc/Makefile | 2 +-
2 fil
Hi,
I need to send v1 with LOWER32 and UPPER32 macro definitions, so bad
to miss them.
Regards,
Suneel
On Thu, Aug 24, 2017 at 12:54 AM, Bin Meng wrote:
> On Thu, Aug 24, 2017 at 2:02 PM, Suneel Garapati
> wrote:
>> If 64-bit capability is supported, commandlistbase and fis base
>> should be
Hi,
On Thu, Aug 31, 2017 at 11:30 PM, Lothar Waßmann
wrote:
> Hi,
>
> On Thu, 10 Aug 2017 22:53:31 -0700 Suneel Garapati wrote:
>> usb tree and info commands may cause crash otherwise
>>
>> Signed-off-by: Suneel Garapati
>> ---
>> cmd/usb.c | 6 --
>> 1 file changed, 4 insertions(+), 2 del
Hi Simon,
On Thu, Aug 31, 2017 at 5:52 AM, Simon Glass wrote:
> Hi Suneel,
>
> On 15 August 2017 at 11:06, Suneel Garapati wrote:
>> Hi Simon,
>>
>>
>> On Sun, Aug 13, 2017 at 2:37 PM, Simon Glass wrote:
>>> Hi Suneel,
>>>
>>> On 10 August 2017 at 23:53, Suneel Garapati wrote:
usb tree an
95 matches
Mail list logo
