Hi,
Do you have any comments?
On 2017/8/3 9:00, Wenyou Yang wrote:
This option is an SPL-variant of the I2C_EEPROM option to enable
the driver for generic I2C-attached EEPROMs for SPL.
Signed-off-by: Wenyou Yang <wenyou.y...@microchip.com>
---
drivers/misc/Kconfig | 8 ++++++++
drivers/misc/Makefile | 2 +-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d1ddbbe157..e441031d04 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -196,4 +196,12 @@ config I2C_EEPROM
depends on MISC
help
Enable a generic driver for EEPROMs attached via I2C.
+
+config SPL_I2C_EEPROM
+ bool "Enable driver for generic I2C-attached EEPROMs for SPL"
+ depends on MISC && SPL && SPL_DM
+ help
+ This option is an SPL-variant of the I2C_EEPROM option.
+ See the help of I2C_EEPROM for details.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 10265c8fb4..21f7e6c6f5 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
endif
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
-obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
+obj-$(CONFIG_$(SPL_)I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
Best Regards,
Wenyou Yang
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
