From: Dave Prue <d...@prue.com>
SUNXI_GMAC was still used to configure the code where as the
same has been renamed and moved to Kconfig in below commit
"sunxi: Move SUNXI_GMAC to Kconfig"
(sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb)
Signed-off-by: Dave Prue <d...@prue.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Reviewed-by: Jagan Teki <ja...@openedev.com>
Reviewed-by: Mark Kettenis <kette...@openbsd.org>
Tested-by: Mark Kettenis <kette...@openbsd.org>
[Tweek commit message, config_whitelist.txt, build-whitelist.sh]
Signed-off-by: Jagan Teki <ja...@openedev.com>
---
Changes for v2:
- Tweek the commit message
- Remove SUNXI_GMAC from config_whitelist.txt
- %s/SUNXI_GMAC/SUN7I_GMAC in build-whitelist.sh
arch/arm/include/asm/arch-sunxi/sys_proto.h | 2 +-
board/sunxi/Makefile | 2 +-
include/configs/sunxi-common.h | 2 +-
scripts/build-whitelist.sh | 4 ++--
scripts/config_whitelist.txt | 1 -
5 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h
b/arch/arm/include/asm/arch-sunxi/sys_proto.h
index a373319..096510b 100644
--- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
@@ -24,7 +24,7 @@ void sdelay(unsigned long);
void return_to_fel(uint32_t lr, uint32_t sp);
/* Board / SoC level designware gmac init */
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
+#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I_GMAC
void eth_init_board(void);
#else
static inline void eth_init_board(void) {}
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index f4411f0..526cb72 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -9,7 +9,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += board.o
-obj-$(CONFIG_SUNXI_GMAC) += gmac.o
+obj-$(CONFIG_SUN7I_GMAC) += gmac.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_SUNXI_AHCI) += ahci.o
endif
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 212862a..1373b1f 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -294,7 +294,7 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_MII /* MII PHY management */
#endif
-#ifdef CONFIG_SUNXI_GMAC
+#ifdef CONFIG_SUN7I_GMAC
#define CONFIG_PHY_ADDR 1
#define CONFIG_MII /* MII PHY management */
#define CONFIG_PHY_REALTEK
diff --git a/scripts/build-whitelist.sh b/scripts/build-whitelist.sh
index 7d8160d..6feb9b6 100755
--- a/scripts/build-whitelist.sh
+++ b/scripts/build-whitelist.sh
@@ -13,10 +13,10 @@ export LC_ALL=C LC_COLLATE=C
# There are two independent greps. The first pulls out the component parts
# of CONFIG_SYS_EXTRA_OPTIONS. An example is:
#
-# SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)
+# SUN7I_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)
#
# We want this to produce:
-# CONFIG_SUNXI_GMAC
+# CONFIG_SUN7I_GMAC
# CONFIG_AHCI
# CONFIG_SATAPWR
#
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index d871095..4651bb5 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2307,7 +2307,6 @@ CONFIG_STV0991_HZ_CLOCK
CONFIG_ST_SMI
CONFIG_SUNXI_AHCI
CONFIG_SUNXI_EMAC
-CONFIG_SUNXI_GMAC
CONFIG_SUNXI_GPIO
CONFIG_SUNXI_MAX_FB_SIZE
CONFIG_SUNXI_USB_PHYS
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
