The bootdata.size should contain the IVT offset part, but the calculation
in imximage tool does not have. This will cause some data at
the end of image not be loaded into memory.
Signed-off-by: Ye.Li
---
tools/imximage.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/t
When boot up without mac address setting, it will give the warning
message like: "Warning: failed to set MAC address", however when
execute network related command, it still execute them without any
warning information.
With this patch, it will exit directly with following information:
"gmac0: mac
Hi Marek,
I am still not seeing this patch in mainline ; maybe you will want to
take it as you suggested?
Thanks,
Alex.
On 10/10/2014 12:10 AM, Marek Vasut wrote:
On Thursday, October 09, 2014 at 05:43:30 AM, Alexandre Courbot wrote:
This USB device works as-is on this driver.
Signed-off-b
Hi Stephen,
On 20 October 2014 20:23, Stephen Warren wrote:
> On 10/19/2014 09:14 PM, Simon Glass wrote:
>> Hi Stephen,
>>
>> On 17 October 2014 20:51, Stephen Warren wrote:
>>> On 09/30/2014 07:41 PM, Stephen Warren wrote:
On 09/22/2014 05:30 PM, Simon Glass wrote:
> This series adds d
On Tue, Oct 21, 2014 at 2:47 PM, Fabio Estevam wrote:
> Hi Christian,
>
> On Tue, Oct 21, 2014 at 9:43 AM, Christian Gmeiner
> wrote:
>> Hi all.
>>
>> Finally I got basic board support for OT1200 into upstream, but the
>> last released
>> version fails to detect SPI flash (read only ff's).
>
> I
From: Fabio Estevam
Add support for the 4.3'' Seiko WVGA parallel display.
In order to direct the splash screen to the Seiko display:
=> setenv panel SEIKO-WVGA
=> save
=> reset
Signed-off-by: Fabio Estevam
---
board/freescale/mx6sabresd/mx6sabresd.c | 61 +
1
Hi,
> Signed-off-by: Gerd Hoffmann
No, I didn't signed this patch off.
And I will not because it is broken.
> for (cnt = (maxsize / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
> addr = base + cnt; /* pointer arith! */
> @@ -44,6 +44,7 @@ long get_ram_size(long *base, lo
On Di, 2014-10-21 at 22:14 +0200, Wolfgang Denk wrote:
> Dear Gerd Hoffmann,
>
> In message <1413910153-5907-1-git-send-email-kra...@redhat.com> you wrote:
> > The original memory sizing code in get_ram_size clobbers the word
> > at the base address, but forgets to restore it.
>
> The funny thing
On Monday, October 20, 2014 at 07:19:33 PM, Jagan Teki wrote:
> On 20 October 2014 20:40, Marek Vasut wrote:
> > On Monday, October 20, 2014 at 04:53:15 PM, Jagan Teki wrote:
> >
> > [...]
> >
> >> > -#define ALTERA_SPI_RXDATA 0
> >> > -#define ALTERA_SPI_TXDATA 4
> >> > -#define ALTER
running "make help" concludes with the claim:
"Execute "make" or "make all" to build all targets marked with [*]"
but i see no make targets marked that way -- i suspect that was just a
copy and paste from the kernel Makefile, yes?
rday
___
U-Boot m
On Thu, Oct 16, 2014 at 10:48:34AM +0200, Hans de Goede wrote:
> Hi,
>
> On 10/15/2014 12:34 PM, Siarhei Siamashka wrote:
> > On Wed, 15 Oct 2014 12:12:11 +0200
> > Hans de Goede wrote:
> >
> >> This change breaks various hardcoded assumptions in the linux-sunxi-3.4
> >> kernels, causing a divid
Signed-off-by: Robert P. J. Day
---
given that the typoes occur in Kconfig help and a comment, the
changes are effectively non-functional.
diff --git a/dts/Kconfig b/dts/Kconfig
index 83ba7a6..5fe63f8 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -49,7 +49,7 @@ config DEFAULT_DEVICE_TREE
Signed-off-by: Anatolij Gustschin
---
include/configs/o2dnt-common.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 133dc6f..b716d05 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@
Signed-off-by: Robert P. J. Day
---
diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h
index 5d18a4b..1ecc0bb 100644
--- a/include/config_distro_defaults.h
+++ b/include/config_distro_defaults.h
@@ -10,7 +10,7 @@
/*
* List of all commands and options that when d
Note: there is no patch 3/3 in his series.
It was originally
[PATCH] powerpc: TQM5200: convert to generic board
but this is actually not related to these changes here, so I decided
to post it independently.
Sorry for the confusion.
Best regards,
Wolfgang Denk
--
DENX Software Engine
Signed-off-by: Wolfgang Denk
---
include/configs/TQM5200.h | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 69c0336..2c1c91f 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -1,5 +1,5 @@
/
The original memory sizing code in get_ram_size clobbers the word
at the base address, but forgets to restore it.
Unlike the (reverted) commit b8496cced856ff411f1eb2e4eff20f5abe7080b0
we save and restore the base address value at the start resp. at the
end of the function. It needs to stay cleare
Dear Gerd Hoffmann,
In message <1413910153-5907-1-git-send-email-kra...@redhat.com> you wrote:
> The original memory sizing code in get_ram_size clobbers the word
> at the base address, but forgets to restore it.
The funny thing is that it avtually works on some boards. Do you have
an explanatio
Prepare code to make later modifications checkpatch-clean.
Signed-off-by: Wolfgang Denk
---
common/memsize.c | 31 +--
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/common/memsize.c b/common/memsize.c
index 589400d..0fb9ba5 100644
--- a/common/memsiz
On Mon, Oct 20, 2014 at 11:15:15PM +0200, Anatolij Gustschin wrote:
> Hey Tom,
>
> The following changes since commit c43fd23cf619856b0763a64a6a3bcf3663058c49:
>
> Prepare v2014.10 (2014-10-14 04:47:15 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-video.gi
On Mon, Oct 20, 2014 at 02:29:00PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit c43fd23cf619856b0763a64a6a3bcf3663058c49:
>
> Prepare v2014.10 (2014-10-14 04:47:15 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
Hi Christian,
On Tue, 21 Oct 2014 13:43:36 +0200
Christian Gmeiner wrote:
> Hi all.
>
> Finally I got basic board support for OT1200 into upstream, but the
> last released
> version fails to detect SPI flash (read only ff's).
>
> The good one is commit 39d0973300b83c08f3f5047245ebf1de883b31f2
Dear Masahiro,
In message
you wrote:
>
> Even Linux needs 7 weeks to be stabilized
> in spite of much more commits than U-Boot.
>
> Do we really need 10 weeks?
I think a fundamental difference between Linux and U-Boot is that in
Linux the actual core is not changing so heavily, and the indivi
On Tue, Oct 21, 2014 at 08:03:59PM +0100, Ian Campbell wrote:
> On Sun, 2014-10-12 at 22:17 +0100, Ian Campbell wrote:
> > > -if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I
> > > + default "sun4i" if TARGET_SUN4I
> > > + default "sun5i" if TARGET_SUN5I
> > > + default "sun6i" if TA
On Tue, Oct 21, 2014 at 4:07 PM, Masahiro YAMADA
wrote:
...
> So two options here I'd like to suggest
>
> [1] Every 2 months release with 2 weeks MW
>
> MW open: 2 weeks
> MW closed: 6.5 weeks
I prefer this option however I also want to warn this will impose more
active response from custodians.
On Sun, 2014-10-12 at 22:17 +0100, Ian Campbell wrote:
> > -if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I
> > + default "sun4i" if TARGET_SUN4I
> > + default "sun5i" if TARGET_SUN5I
> > + default "sun6i" if TARGET_SUN5I
There is a typo here which is apparent with "MAKEALL -
On Fri, 2014-10-17 at 22:48 +0800, Chen-Yu Tsai wrote:
> Hi Ian,
>
> On Mon, Oct 13, 2014 at 8:57 PM, Maxime Ripard
> wrote:
> > On Sun, Oct 12, 2014 at 04:23:05PM +0800, Chen-Yu Tsai wrote:
> >> On Sun, Oct 12, 2014 at 12:05 AM, Ian Campbell wrote:
> >> > On Tue, 2014-10-07 at 15:11 +0800, Chen
On Sun, 2014-10-12 at 10:40 +0800, Chen-Yu Tsai wrote:
> On Sat, Oct 11, 2014 at 11:33 PM, Ian Campbell wrote:
> > On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
> >> +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
> >> + static const struct sunxi_wdog *wdog =
> >> + ((str
Hello,
The following is the notes of the open discussion sent by Detlev:
> The fact that a large set of patches for the SoCFPGAs was merged after
> -rc1 was questioned as it does not 100% comply with the rules. The
> patches constrained to SoCFPGA were no (big) problem, but one of those
> patche
Function bounce_buffer_start can return ENOMEM when memalign fails,
but the error code is never checked.
One such failure happens when state->len_aligned is larger than the
remaining free memory (set via CONFIG_SYS_MALLOC_LEN).
This leaves state->bounce_buffer as a NULL. If unchecked, the
tegra_m
Hi Stefano,
Thanks for your review.
+static int mx6_rgmii_rework(struct phy_device *phydev)
+{
+ unsigned short val;
+
+ /* To enable AR8035 ouput a 125MHz clk from CLK_25M */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x801
This patch makes the following changes:
- Set kernel entry point correctly
- Append bootargs from image to global bootargs instead
of replacing them
- Return end address instead of size from android_image_get_end()
- Give correct parameter to genimg_get_format() in boot_get_ramdisk()
Signe
The original memory sizing code in get_ram_size clobbers the word
at the base address, but forgets to restore it.
Unlike the (reverted) commit b8496cced856ff411f1eb2e4eff20f5abe7080b0
we'll go save and restore the base address value at the start and then
end of the function. It needs to stay clea
Hi Christian,
On Tue, Oct 21, 2014 at 9:43 AM, Christian Gmeiner
wrote:
> Hi all.
>
> Finally I got basic board support for OT1200 into upstream, but the
> last released
> version fails to detect SPI flash (read only ff's).
I can confirm that 2014.10 has a SPI probe issue on a mx6qsabresd as wel
On Tue, Oct 21, 2014 at 01:43:36PM +0200, Christian Gmeiner wrote:
> Hi all.
>
> Finally I got basic board support for OT1200 into upstream, but the
> last released
> version fails to detect SPI flash (read only ff's).
[snip]
> I had to skip steps in the bisect run as the board support was
> not e
Hello, Mr. Glass
On Tue, Oct 21, 2014 at 12:42 AM, Simon Glass wrote:
>
> Why have ANDR_BOOT_ARGS_SIZE? If you are going to malloc() anyway, you
> may as well avoid the limit. Something like:
>
> char *bootargs = getenv("bootargs");
> int len = 0;
>
> if (*hdr->cmdline)
>len += strlen(hdr->cm
On Tue, Oct 21, 2014 at 12:13:23PM -0400, Tom Rini wrote:
> On Tue, Oct 21, 2014 at 10:41:02PM +0900, Masahiro YAMADA wrote:
> > Hi Tom,
> >
> > 2014-10-21 22:20 GMT+09:00 Tom Rini :
> > >> diff --git a/config.mk b/config.mk
> > >> index 2157537..00805bd 100644
> > >> --- a/config.mk
> > >> +++ b/
Hi Jason,
On 20 October 2014 20:52, Duxiaoqiang wrote:
> Hi Simon & All
>
>
>
> These days I tested verified U-Boot on ARM Foundation. And I found a problem
> when I tested like this:
>
> 1) Generate a FIT image and signature blob file like: mkimage –D “-I
> dts –O dtb –p 2000” –F kernel.it
Hi Alban,
On 21 October 2014 06:51, Alban Bedel wrote:
> On Fri, 17 Oct 2014 14:12:18 -0600
> Simon Glass wrote:
>
>> >
>> > I'm unsure about the 'defaults' commands, I would tend to see it at
>> > the eeprom level as it might be needed in various situations. However
>> > it must be provided by
Hi Marcel,
On 21 October 2014 08:37, Marcel Ziswiler wrote:
> Migrating our BSPs towards mainline U-Boot I noticed it suddenly booting
> slower. With mainline Linux I noticed about a 1 to 2 second increase
> while booting downstream L4T takes 10 to 15 seconds longer! Git
> bisecting it revealed t
On Tue, Oct 21, 2014 at 10:41:02PM +0900, Masahiro YAMADA wrote:
> Hi Tom,
>
> 2014-10-21 22:20 GMT+09:00 Tom Rini :
> >> diff --git a/config.mk b/config.mk
> >> index 2157537..00805bd 100644
> >> --- a/config.mk
> >> +++ b/config.mk
> >> @@ -18,6 +18,8 @@ PLATFORM_LDFLAGS :=
> >> LDFLAGS :=
> >>
Hello Masahiro,
On 21-10-14 17:41, Masahiro Yamada wrote:
Since commit fe1378a961e5 (ARM: use r9 for gd), r9 register
is used on ARM to hold global_data.
Signed-off-by: Masahiro Yamada
---
doc/README.standalone | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/README.
Since commit fe1378a961e5 (ARM: use r9 for gd), r9 register
is used on ARM to hold global_data.
Signed-off-by: Masahiro Yamada
---
doc/README.standalone | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/README.standalone b/doc/README.standalone
index 2be5f27..e3000ef 10064
On 21.10.2014 17:25, Igor Grinberg wrote:
Fix the following checkpatch issues:
CHECK: No space is necessary after a cast
\#39: FILE: arch/arm/include/asm/arch-am33xx/mux.h:39:
+#define PAD_CTRL_BASE 0x800
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
CHECK: Avoid CamelCase
Fix the following checkpatch issues:
CHECK: No space is necessary after a cast
\#39: FILE: arch/arm/include/asm/arch-am33xx/mux.h:39:
+#define PAD_CTRL_BASE 0x800
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
CHECK: Avoid CamelCase:
\#284: FILE: arch/arm/include/asm/arch-om
Migrating our BSPs towards mainline U-Boot I noticed it suddenly booting
slower. With mainline Linux I noticed about a 1 to 2 second increase
while booting downstream L4T takes 10 to 15 seconds longer! Git
bisecting it revealed the following commit to be at odds:
858530a8c0a7ce7e573e513934804a00d6
Hi Masahiro,
On Tue, 21 Oct 2014 14:41:14 +0900, Masahiro Yamada
wrote:
> I have a question:
>
> You are covering only arm1176 and armv7.
> What about arm1136?
>
> I am not sure, but arm1136 and arm1176 both belong to ARMv6 generation?
> If so, does arm1136 have VBAR register, doesn't it?
ARM
Dear Gerd,
In message <1413894504-26255-1-git-send-email-kra...@redhat.com> you wrote:
> base[0] is saved, but only restored in case the ram test failed.
When posting a new version of a patch please always make sure to add a
change log!
I'm afraid your patch breaks at least some boards; tested
On 21.10.2014 15:42, Wolfgang Denk wrote:
The file board/Marvell/include/mv_gen_reg.h is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause). As this cannot be fixed, we remove t
Hi Georges,
On Mon, 20 Oct 2014 23:08:30 +0200, Georges Savoundararadj
wrote:
> Hi Albert,
>
> Le 15/10/2014 00:11, Albert ARIBAUD a écrit :
> > Hi Georges,
> >
> > On Tue, 14 Oct 2014 22:02:00 +0200, Georges Savoundararadj
> > wrote:
> >
> >> Hi Albert,
> >>
> >> Hi Masahiro,
> > (putting Mas
The file board/Marvell/include/mv_gen_reg.h is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause). As this cannot be fixed, we remove the file and all
code that depends on it. Fo
Signed-off-by: Wolfgang Denk
---
doc/README.scrapyard | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 1dcdcc7..1b6ae83 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,14 +12,14 @@ The list s
Hi Tom,
2014-10-21 22:20 GMT+09:00 Tom Rini :
>> diff --git a/config.mk b/config.mk
>> index 2157537..00805bd 100644
>> --- a/config.mk
>> +++ b/config.mk
>> @@ -18,6 +18,8 @@ PLATFORM_LDFLAGS :=
>> LDFLAGS :=
>> LDFLAGS_FINAL :=
>> OBJCOPYFLAGS :=
>> +# clear VENDOR for tcsh
>> +VENDOR :=
>>
This patch series makes minor adjustments to the
cm-t35/cm-t3730 board code.
Igor Grinberg (3):
omap3: Kconfig: fix the cm-t35 board option prompt
omap3: cm-t35: use define for mmc wp gpio
omap3: cm-t35: remove enable_gpmc_cs_config()
arch/arm/cpu/armv7/omap3/Kconfig | 2 +-
board/compula
The cm-t35 board support covers both cm-t3530 and cm-t3730 boards.
Mention both boards in the Kconfig option prompt.
Signed-off-by: Igor Grinberg
---
arch/arm/cpu/armv7/omap3/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/c
Switch to using define for MMC WP GPIO instead of a magic number.
Signed-off-by: Igor Grinberg
---
board/compulab/cm_t35/cm_t35.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 0944903..6728ac1 100644
-
The gpmc_init() function already calls enable_gpmc_cs_config() for chip
select 0. Although the bus width is configured for 16 bit, it gets
reconfigured correctly in the omap_gpmc driver later.
Remove the enable_gpmc_cs_config() function call and the associated
gpmc_nand_config[] array.
Signed-off
On Tue, Oct 21, 2014 at 01:18:32PM +0900, Masahiro Yamada wrote:
> Since the environment "VENDOR" is set in tcsh, it must be cleared in our
> makefile. Otherwise, boards without CONFIG_SYS_VENDOR fail to build:
>
> > make CROSS_COMPILE=arm-linux-gnueabi- wandboard_quad_defconfig all
> [ sni
On Fri, 17 Oct 2014 14:12:18 -0600
Simon Glass wrote:
> >
> > I'm unsure about the 'defaults' commands, I would tend to see it at
> > the eeprom level as it might be needed in various situations. However
> > it must be provided by the device, not the eeprom driver itself.
> > It might also make s
base[0] is saved, but only restored in case the ram test failed.
Test case: Start u-boot in qemu, using vexpress-a9 emulation.
qemu places the fdt at the start of ram, as a service for the
guest. Trying to pick it up there by setting fdt_addr
accordingly fails because the fdt magic cookie is gon
Hi,
> I cannot see any memory corruption. If I understand you correctly,
> the contents of address 0x should be overwritten here?
Depends on the address space layout. vexpress-a9 has flash mapped at
0x. RAM starts at 0x6000, and four bytes at 0x6000 get
corrupted.
Po
I finally had a look at the datasheet and spotted an additional
register address difference between regular E1000 and i210/i211 chips.
This patch fixes this and now successfully works on programmed
i210/i211 as well as unprogrammed i211.
Signed-off-by: Marcel Ziswiler
---
Please note that unprogr
The config targets described in README are not present
any more, update the info to currently used targets.
Signed-off-by: Anatolij Gustschin
---
board/freescale/mpc5121ads/README | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mpc5121ads/README
b/board/f
On 22/09/2014 18:55, Fabio Estevam wrote:
> HDMI config options can be placed into the common mx6sabre_common.h file to
> avoid duplication.
>
> Signed-off-by: Fabio Estevam
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 22/09/2014 18:55, Fabio Estevam wrote:
> Let HDMI splash screen support work by default.
>
> Signed-off-by: Fabio Estevam
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering
On 07/10/2014 10:58, Christian Gmeiner wrote:
> Signed-off-by: Christian Gmeiner
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HR
Hi Christian,
On 21/10/2014 13:43, Christian Gmeiner wrote:
> Hi all.
>
> Finally I got basic board support for OT1200 into upstream, but the
> last released
> version fails to detect SPI flash (read only ff's).
>
> The good one is commit 39d0973300b83c08f3f5047245ebf1de883b31f2
> and the bad on
Dear Gerd Hoffmann,
In message <1413887467-18799-1-git-send-email-kra...@redhat.com> you wrote:
> base[0] is saved, but never restored.
>
> Test case: Start u-boot in qemu, using vexpress-a9 emulation.
> qemu places the fdt at the start of ram, as a service for the
> guest. Trying to pick it up
Add USB XHCI support for ls1021aqds platform and
making this as default mode
Signed-off-by: Ramneek Mehresh
---
include/configs/ls1021aqds.h | 21 -
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
inde
Add USB EHCI/XHCI support for ls1021atwr platform and
making xHCI as default mode
Signed-off-by: Ramneek Mehresh
---
include/configs/ls1021atwr.h | 28
1 file changed, 28 insertions(+)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 45
Signed-off-by: Anatolij Gustschin
---
include/configs/digsy_mtc.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index 2a8cb39..76ec168 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -22,6 +22,8 @@
Signed-off-by: Anatolij Gustschin
Cc: Reinhard Arlt
---
include/configs/mecp5123.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 6c19817..0b9cbae 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -15
Signed-off-by: Anatolij Gustschin
---
include/configs/ac14xx.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index f57820d..54b7028 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -13,6 +13,9 @@
#define __CONFIG
Signed-off-by: Anatolij Gustschin
---
include/configs/pdm360ng.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 553eb8f..17d7bca 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -13,6 +13,8 @@
#define
Commit d6b11fd1 (powerpc: remove MBX and MBX860T boards support)
removed mbxbar field in "struct sysconf512x" by mistake and broke
booting on mpc5121 boards. Fix it.
Signed-off-by: Anatolij Gustschin
---
NOTE: ALL mpc512x boards are broken in releases v2014.07 and
v2014.10.
arch/powerpc/include
Also enable CONFIG_DISPLAY_BOARDINFO to get checkboard() called.
Signed-off-by: Anatolij Gustschin
---
include/configs/mpc5121ads.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 7de245b..41ae0a5 100644
--- a/include/confi
Signed-off-by: Anatolij Gustschin
---
include/configs/aria.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/aria.h b/include/configs/aria.h
index c36cf33..2f9677c 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -13,6 +13,9 @@
#define __CONFIG_H
#def
Hi all.
Finally I got basic board support for OT1200 into upstream, but the
last released
version fails to detect SPI flash (read only ff's).
The good one is commit 39d0973300b83c08f3f5047245ebf1de883b31f2
and the bad one is c43fd23cf619856b0763a64a6a3bcf3663058c49
[christian@chgm-pc u-boot]$ gi
On Mon, 2014-10-20 at 15:40 +, Tom Warren wrote:
> Sorry, Marcel. Must have missed it. I'll rebase u-boot-tegra/master against
> ARM master and apply this, and if no other Tegra patches are pending, I'll
> send a PR later this week.
Thanks, Tom. According to my notes the following 10 patches
Hi Soeren,
On 18/10/2014 13:13, Soeren Moch wrote:
> Add initial support for TBS2910 Matrix ARM miniPC.
> Support includes MMC, Ethernet, UARTs, HDMI, USB, SATA, PCI, I2C, RTC.
>
> Cc: Stefano Babic
> Signed-off-by: Soeren Moch
> ---
Just a couple of small questions:
> arch/arm/Kconfig
On Di, 2014-10-21 at 12:05 +0200, Gerd Hoffmann wrote:
> Check if the fdt is there (happens only when passed via -dtb cmd line
> switch to qemu), then setup env accordingly. If present use it.
> Otherwise try to load from disk.
Oops, wrong patch, correct one just send.
It shows what I'm doing tho
base[0] is saved, but never restored.
Test case: Start u-boot in qemu, using vexpress-a9 emulation.
qemu places the fdt at the start of ram, as a service for the
guest. Trying to pick it up there by setting fdt_addr
accordingly fails because the fdt magic cookie is gone (zeroed
out) after callin
On Tue, 21 Oct 2014 13:27:45 +0300
Igor Grinberg wrote:
> Fix typo in defconfig file format description.
>
> Signed-off-by: Igor Grinberg
> Cc: Masahiro Yamada
> ---
> doc/README.kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/doc/README.kconfig b/doc/README
Fix typo in defconfig file format description.
Signed-off-by: Igor Grinberg
Cc: Masahiro Yamada
---
doc/README.kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/README.kconfig b/doc/README.kconfig
index 3aad5b4..69dc459 100644
--- a/doc/README.kconfig
+++ b/doc/REA
Check if the fdt is there (happens only when passed via -dtb cmd line
switch to qemu), then setup env accordingly. If present use it.
Otherwise try to load from disk.
Also tweak CONFIG_SYS_LOAD_ADDR and LINUX_BOOT_PARAM_ADDR a bit to
avoid them overriding the fdt.
---
board/armltd/vexpress/vexpr
Hi,
On 10/14/14 07:50, Simon Glass wrote:
> Hi,
>
> This question came up at the U-Boot mini-summit yesterday and I was
> tasked with starting a thread on the mailing list.
>
> There seemed to be a strong feeling in the room that permitting
> platform data in driver model is a mistake. Reasons m
Hi Simon,
I'm sorry for that late reply, I've had email problems during the
conference...
Finally, I have the email working again and going through the stuff...
I guess, it is better late than never..
On 10/14/14 10:25, Simon Glass wrote:
> Hi Stefan,
>
> On 3 October 2014 08:39, Igor Grinberg
Dear Gerd,
In message <1413874945-16560-1-git-send-email-kra...@redhat.com> you wrote:
> base[0] is saved, but never restored.
Patches for this have been submitted before, but were rejected. You
may want to dig the archives for these.
What exactly is your test case where you see any memory corr
Added in v1:
- Add pin mux support for ls1021aqds.
Test log:
U-Boot 2014.07-01993-g052b512-dirty (Oct 20 2014 - 19:58:20)
CPU: Freescale LayerScape LS1020E, Version: 1.0, (0x87081010)
Clock Configuration:
CPU0(ARMV7):1000 MHz,
Bus:300 MHz, DDR:800 MHz (1600 MT/s data rate),
The Freescale LS1021AQDS share some pins, so Add the hwconfig option
that allows the user to choose which the function he wants.
The main pin mux IP is:
eSDHC, SAI, IIC2, RGMII, CAN, SAI.
Signed-off-by: Yuan Yao
---
board/freescale/ls1021aqds/ls1021aqds.c | 67 -
On 01/10/2014 00:40, Eric Nelson wrote:
> Include to see the prototype for get_board_rev()
> and prevent warning "Should it be static?" with "make C=1".
>
> Signed-off-by: Eric Nelson
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
==
On 01/10/2014 00:40, Eric Nelson wrote:
> Declare displays[] and display_count in imx-common/video.h to
> prevent "Should it be static?" messages when compiling board
> files with "make C=1".
>
> Signed-off-by: Eric Nelson
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 01/10/2014 00:40, Eric Nelson wrote:
> Provide a public declaration of the board_spi_cs_gpio()
> callback for i.MX SPI chip selects to prevent the warning
> "Should it be static?" when compiling with "make C=1".
>
> Signed-off-by: Eric Nelson
> ---
Applied to u-boot-imx, thanks !
Best regard
Hi Eric,
On 01/10/2014 00:40, Eric Nelson wrote:
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D
base[0] is saved, but never restored.
Signed-off-by: Gerd Hoffmann
---
common/memsize.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/common/memsize.c b/common/memsize.c
index 589400d..8bda2ba 100644
--- a/common/memsize.c
+++ b/common/memsize.c
@@ -48,7 +48,9 @@ long ge
Thanks Masahiro,
On 21-10-14 06:18, Masahiro Yamada wrote:
Since the environment "VENDOR" is set in tcsh, it must be cleared in our
makefile. Otherwise, boards without CONFIG_SYS_VENDOR fail to build:
> make CROSS_COMPILE=arm-linux-gnueabi- wandboard_quad_defconfig all
[ snip ]
AR
96 matches
Mail list logo
