Dear Gerd,
In message <1413894504-26255-1-git-send-email-kra...@redhat.com> you wrote:
> base[0] is saved, but only restored in case the ram test failed.
When posting a new version of a patch please always make sure to add a
change log!
I'm afraid your patch breaks at least some boards; tested on TQM5200
board...
Before (v2014.10):
U-Boot 2014.10 (Oct 21 2014 - 15:59:47)
CPU: MPC5200B v2.2, Core v1.4 at 396 MHz
Bus 132 MHz, IPB 132 MHz, PCI 66 MHz
Board: TQM5200S (TQ-Components GmbH)
on a STK52xx carrier board
I2C: 85 kHz, ready
DRAM: 64 MiB
Flash: 32 MiB
In: serial
Out: serial
Err: serial
Net: FEC
IDE: Bus 0: OK
...
With your patch:
U-Boot 2014.10-00001-g27030e7 (Oct 21 2014 - 15:45:12)
CPU: MPC5200B v2.2, Core v1.4 at 396 MHz
Bus 132 MHz, IPB 132 MHz, PCI 66 MHz
Board: TQM5200S (TQ-Components GmbH)
on a STK52xx carrier board
I2C: 85 kHz, ready
DRAM: 1 GiB
[board hangs here]
Note also the incorrect RAM size.
Sorry, but this is not a correct fix. NAK.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
"It's when they say 2 + 2 = 5 that I begin to argue." - Eric Pepke
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
