armadillo-800eva needs this config.
Signed-off-by: Nobuhiro Iwamatsu
---
include/configs/armadillo-800eva.h |1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/armadillo-800eva.h
b/include/configs/armadillo-800eva.h
index d1a0b62..b4402dd 100644
--- a/include/configs/armadillo
Signed-off-by: Nobuhiro Iwamatsu
---
include/configs/armadillo-800eva.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/armadillo-800eva.h
b/include/configs/armadillo-800eva.h
index 2f75099..5b634fd 100644
--- a/include/configs/armadillo-800eva.h
+++ b/include/configs/ar
Signed-off-by: Nobuhiro Iwamatsu
---
include/configs/armadillo-800eva.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/armadillo-800eva.h
b/include/configs/armadillo-800eva.h
index 5b634fd..d1a0b62 100644
--- a/include/configs/armadillo-800eva.h
+++ b/include/configs/ar
This initializes GPIO, without using PFC framework in
board_early_init_f function. It is because it cannot initialize
normally when PFC is used.
Signed-off-by: Nobuhiro Iwamatsu
---
board/atmark-techno/armadillo-800eva/armadillo-800eva.c |8 +---
1 file changed, 5 insertions(+), 3 deleti
Erasing flash sectors protected with persistent protection bit (PPB)
mechanism on Spansion flash chips doesn't work. Add sector protection
status checking and sector lock and unlock commands to fix this.
Signed-off-by: Anatolij Gustschin
Cc: Stefan Roese
---
drivers/mtd/cfi_flash.c | 52 +
Dear sir,
I'm porting u-boot for mpc8280 based CPU board by taking mpc8260ads
reference, its hanging at some some point. i enabled debug mode.
U-Boot 1.3.1 (Aug 8 2012 - 09:19:16)
MPC8260 Reset Status: Check Stop, External Soft, External Hard
MPC8260 Clock Configuration
- Bus-to-Core
Hi Holger,
thanks for this patch. I do have a minor comment though below.
On 08/08/2012 04:52 PM, Holger Brunck wrote:
> commit 54652991
> Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
>
> fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads
> to problems for s
uboot sets up the trap handler (function trap_init called from
lib_ppc/board.c).
As soon this is called the processor seems to be getting an machine check
exception/trap. (Refer to the logs below)
This also apparently causes processor to freeze, such that I am not able to
read any CPU registers us
This erratum applies to the following SoCs:
P4080 rev 1.0, 2.0, fixed in rev 3.0
P2041 rev 1.0, 1.1, fixed in rev 2.0
P3041 rev 1.0, 1.1, fixed in rev 2.0.
Workaround for erratum NMG_CPU_A011 is enabled by default. This workaround
may degrade performance. P4080 erratum CPU22 shares the same workar
Add support for command line "usb reset" or "usb start" to initialize , "usb
stop" to stop multiple USB controllers at once.
Other command like "usb tree" also supports multiple controllers.
New added definitions in header file are:
CONFIG_USB_MULTI
CONFIG_USB_MAX_CONTROLLER_COUNT
Signed-off-by:
Add support for command line "usb reset" or "usb start" to initialize
, "usb stop" to stop multiple USB controllers at once.
Other commands like "usb tree" also support multiple controllers.
Example to add definitions in header file like include/configs/seaboard.h are:
define CONFIG_USB_MULTI
defi
>-Original Message-
>From: Andy Fleming [mailto:aflem...@gmail.com]
>Sent: Thursday, August 09, 2012 5:10 AM
>To: Xie Shaohui-B21989
>Cc: u-boot@lists.denx.de
>Subject: Re: [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl
>image build.
>
>On Tue, Jun 12, 2012 at 3:11 AM, Shaohu
On 27 July 2012 10:30, Donghwa Lee wrote:
> This patch supports exynos fimd driver for various exynos series different
> from
> existing it supports only exynos4 chip.
>
> Signed-off-by: Donghwa Lee
> Signed-off-by: Kyungmin Park
> ---
> Changes for v1:
> - moves exynos_fimd_get_base_of
On Wed, Aug 8, 2012 at 9:27 PM, Matthew McClintock wrote:
> On Wed, Aug 8, 2012 at 8:06 PM, Scott Wood wrote:
>> LAW init is skipped in the SPL payload because it's assumed that the SPL
>> has taken care of it -- so make sure the SPL loads all the LAWs as is
>> done on other boards.
>
> It might
On Wed, Aug 8, 2012 at 8:06 PM, Scott Wood wrote:
> LAW init is skipped in the SPL payload because it's assumed that the SPL
> has taken care of it -- so make sure the SPL loads all the LAWs as is
> done on other boards.
It might be good to try this on a few different compilers to see if
they are
Remove linker command line options from the SPL makefile
that force the inclusion of unreferenced command code from
linked object files. As commands are not used in the SPL,
these options resulted in an unnecessary increase in the
image size, in addition to introducing the possibility of
tricky lin
On Wednesday 08 August 2012 12:01:07 Marek Vasut wrote:
> Dear Mike Frysinger,
> > On Wednesday 08 August 2012 06:52:17 Marek Vasut wrote:
> > > This function converts static number to string in preprocessor.
> > > This is useful as it allows higher usage of puts() in favour of
> > > printf()
> >
This is useful for forcing the ROM's
usb downloader to activate upon a watchdog reset.
Or, you can boot from either SD Card.
Currently, support added for MX53 and MX6Q
Signed-off-by: Troy Kisky
Note: MX53 support untested.
---
arch/arm/cpu/armv7/imx-common/Makefile|1 +
arch/arm/cpu
This allows a watchdog reset to start the ROM's
usb downloader, or boot from an sdcard.
Signed-off-by: Troy Kisky
---
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 14 ++
include/configs/mx6qsabrelite.h |3 +++
2 files changed, 17 insertions(+)
diff --git a/boa
This allows a watchdog reset to start the ROM's
usb/serial downloader, or boot from an sdcard.
Signed-off-by: Troy Kisky
Compile tested only, I don't have a mx53evk.
---
board/freescale/mx53evk/mx53evk.c | 13 +
include/configs/mx53evk.h |3 +++
2 files changed, 16 ins
LAW init is skipped in the SPL payload because it's assumed that the SPL
has taken care of it -- so make sure the SPL loads all the LAWs as is
done on other boards.
This bug was introduced by:
commit 4589728e214958a4e6e011a081a68d360c49d7a5
Author: Kumar Gala
Date: Fri Nov 11 08:14:53 20
This is needed to make room for a bugfix on p1_p2_rdb_pc. A sync is used
before the final write to LSOR that initiates the transaction, to ensure
all the other set up has been completed.
Signed-off-by: Scott Wood
---
nand_spl/nand_boot_fsl_elbc.c | 47 ++---
Hi All,
While the need for early malloc() came about from the driver model and
the desire to make drivers usable before relocation, I think we can all
agree that its scope may well not be limited to use by drivers. A few
examples I can think of the top of my head include:
- pre-console buffer
On Fri, Jun 29, 2012 at 4:37 AM, Shaohui Xie wrote:
> Lane muxing on p2041 is controlled by a reg in CPLD, offset of this reg
> is 0xc, CPLD supports SATA by default, we should re-configure the lane
> muxing according to RCW, which indicates what SerDes protocol it is running.
>
> Default lane mux
Please copy me on 85xx patches
On Fri, Jun 29, 2012 at 4:36 AM, Shaohui Xie wrote:
> fsl_ddr_get_dimm_params() should be wrapped by
> CONFIG_SYS_DDR_RAW_TIMING, otherwise, when using fixed_sdram() instead of
> using SPD, it will cause compile error.
>
> Signed-off-by: Shaohui Xie
> Acked-by: Yor
Please copy me on 85xx patches (That includes corenet)
On Fri, Jun 29, 2012 at 4:35 AM, Shaohui Xie wrote:
> ENV location compile logic is wrong, and when CONFIG_SYS_NO_FLASH is defined
> and non-NOR u-boot is building, it will cause compile error. Also, add
> CONFIG_SYS_FLASH_USE_BUFFER_WRITE fo
On Thu, Jul 12, 2012 at 4:39 AM, Jia Hongtao wrote:
> PHYs on SGMII riser card are used in SGMII mode with different external
> IRQs from eTSEC. This means in SGMII mode phy-handle and phy-connection-type
> under ethernet node should be updated. Otherwise the PHY interrupt can not
> be handled the
If we build everything correctly with multiple builds, and an
ERR directory had been previously created, we failed to report
that everything was fine because grep failed to find anything
in the ERR directory. Use grep -r, which doesn't complain if
there are no input files.
Signed-off-by: Andy Flem
On Fri, Jul 6, 2012 at 12:39 PM, Timur Tabi wrote:
> The P3060 was cancelled before it went into production, so there's no point
> in supporting it.
>
> Signed-off-by: Timur Tabi
Please rebase this off the top of my current tree.
___
U-Boot mailing lis
On Fri, Jul 6, 2012 at 12:39 PM, Timur Tabi wrote:
> The BR_PHYS_ADDR(x) macro was missing parentheses around "x" in the macro
> definition, so callers had to supply their own parenthesis.
>
> Signed-off-by: Timur Tabi
Applied, thanks
___
U-Boot mailin
On Fri, May 18, 2012 at 2:09 PM, Timur Tabi wrote:
> In order for indirect mode on the PIXIS to work properly, both chip selects
> need to be set to GPCM mode, otherwise writes to the chip select base
> addresses will not actually post to the local bus -- they'll go to the
> NAND controller instea
On Fri, May 18, 2012 at 11:04 AM, Timur Tabi wrote:
> From: Matthew McClintock
>
> Add TLB mappings, board target options, and configuration items
> need for SPI/SD boot.
>
> Since P1022DS RevB board, the NOR flash have been changed to 16 bit/28bit
> address flash, therefore, when SDHC/ESPI booti
powerpc/82xx: adapt SDRAM settings for mgcoge3ne (2012-07-31 22:36:38 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-mpc85xx.git master
for you to fetch changes up to 5c5befda58e4a3f198a033e8a9952b2b309acc86:
powerpc/85xx: use CONFIG_SYS_FSL_PCIE_COMPAT macro
Hi Tomas & Wolfgang,
On Thu, Aug 9, 2012 at 5:32 AM, Wolfgang Denk wrote:
> Dear Tomas Hlavacek,
>
> In message
> you
> wrote:
[snip]
> If so, my argument goes, you must not use the standard malloc() /
> calloc() / free() API for the early_malloc implementation. If you do,
> there my be any
On Thu, Jun 7, 2012 at 1:43 AM, Liu Gang wrote:
> Signed-off-by: Liu Gang
> ---
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +++--
> arch/powerpc/cpu/mpc8xxx/srio.c | 137
> ---
The change here (and in fsl_pci_init.c in another patch) causes
horrible build
On Wed, Aug 8, 2012 at 6:16 PM, York Sun wrote:
> On Wed, 2012-08-08 at 15:09 -0500, Andy Fleming wrote:
>> Please copy me on any 85xx U-Boot patches.
>>
>>
>> >
>> > +#define HWCONFIG_BUFFER_SIZE 128
>>
>>
>> [...]
>>
>> > + char buffer[HWCONFIG_BUFFER_SIZE];
>> > + char *buf = NULL;
On Wed, 2012-08-08 at 15:09 -0500, Andy Fleming wrote:
> Please copy me on any 85xx U-Boot patches.
>
>
> >
> > +#define HWCONFIG_BUFFER_SIZE 128
>
>
> [...]
>
> > + char buffer[HWCONFIG_BUFFER_SIZE];
> > + char *buf = NULL;
> > +
> > + if (getenv_f("hwconfig", buffer, sizeof
Dear Benoît Thébaudeau,
> Dear Marek Vasut,
>
> On Sat, Aug 4, 2012 at 09:45:33 AM, Marek Vasut wrote:
> > > On Tue, Jul 31, 2012 at 03:06:00 AM, Benoît Thébaudeau wrote:
> > > > > > Marek, what do you think?
> > > > >
> > > > > Had a good evening with the EHCI r10 spec, hope I answered most
> >
Dear Marek Vasut,
On Sat, Aug 4, 2012 at 09:45:33 AM, Marek Vasut wrote:
> > On Tue, Jul 31, 2012 at 03:06:00 AM, Benoît Thébaudeau wrote:
> > > > > Marek, what do you think?
> > > >
> > > > Had a good evening with the EHCI r10 spec, hope I answered most
> > > > of
> > > > your
> > > > questions.
BTW, please merge this with the other AO11 patches, too (I've already
marked this as "changes requested" in patchworks).
On Fri, Jul 20, 2012 at 3:59 PM, York Sun wrote:
> P3041 was left out in previous commit 5e23ab0a.
> Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0.
> It
All,
I'm needing the ability to upgrade the kernel and root-filesystem
on the NAND chip on the imx28evk from new files that reside on a USB
memory stick. That is I want to partition the NAND (mtd) into 3
sections that contain u-boot, kernel, rootfs. Then whenever the system
is booted,
Backend driver for MUSB OTG controllers found on TI AM33xx and
TI81xx SoCs (tested with AM33xx only).
Signed-off-by: Ilya Yanok
---
arch/arm/include/asm/omap_musb.h | 25 ++
drivers/usb/musb-new/Makefile|1 +
drivers/usb/musb-new/musb_dsps.c | 769 +
AM33xx has support for dual port MUSB OTG controller. This patch
adds initialization for the controller using new MUSB gadget
driver and ether gadget.
Signed-off-by: Ilya Yanok
---
arch/arm/cpu/armv7/am33xx/board.c | 81 ++-
arch/arm/cpu/armv7/am33xx/clock.c
Enable musb gadget in Ethernet mode on port 0.
Signed-off-by: Ilya Yanok
---
include/configs/am335x_evm.h | 19 +++
1 file changed, 19 insertions(+)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index c827ebf..e0f0656 100644
--- a/include/configs/am3
Signed-off-by: Ilya Yanok
---
drivers/usb/gadget/config.c |1 -
drivers/usb/gadget/epautoconf.c |1 -
drivers/usb/gadget/ether.c |1 -
drivers/usb/gadget/s3c_udc_otg.c |1 -
drivers/usb/gadget/usbstring.c |1 -
include/linux/usb/ch9.h | 514 +++
Current MUSB driver in U-Boot uses old UDC API while new gagdet
client drivers need new gadget API. Also current MUSB driver has
some significant limitations (like inability to handle tx for
endpoints other than ep0). So I think port of new Linux driver is
desirable.
This is initial port, performe
On Tue, Jun 12, 2012 at 3:11 AM, Shaohui Xie wrote:
> Provides a tool to build boot Image for PBL(Pre boot loader) which is
> used on Freescale CoreNet SoCs, PBL can be used to load some instructions
> and/or data for pre-initialization. The default output image is u-boot.pbl,
> for more details p
Please copy me on any 85xx U-Boot patches.
>
> +#define HWCONFIG_BUFFER_SIZE 128
[...]
> + char buffer[HWCONFIG_BUFFER_SIZE];
> + char *buf = NULL;
> +
> + if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
> + buf = buffer;
This seems fragile. I suppose th
On 08/08/2012 12:44 PM, Wolfgang Denk wrote:
> Dear Allen Martin,
>
> In message <138286-14144-1-git-send-email-amar...@nvidia.com> you wrote:
>> lowlevel_init() is called before stack is initialized, so it's not
>> safe to call directly into C code. Copy this wrapper from omap that
>> saves
Dear Allen Martin,
In message <138286-14144-1-git-send-email-amar...@nvidia.com> you wrote:
> lowlevel_init() is called before stack is initialized, so it's not
> safe to call directly into C code. Copy this wrapper from omap that
> saves off the ip register and sets up a temporary stack. Th
Dear Thirumalesha N,
In message
you wrote:
>
> I'm porting u-boot for mpc8280 based CPU board by taking mpc8260ads
> reference, its hanging at some some point. i enabled debug mode.
>
>
> U-Boot 1.3.1 (Aug 8 2012 - 09:19:16)
U-Boot v1.3.1 is more than 5 years old. Consider it dead a
Dear Tomas Hlavacek,
In message
you wrote:
>
> > But "relocation" means that you have to add the address difference
> > (aka relocation offset) to _all_ pointers pointing into this area.
> > And there is no way to keep track of _all_ such pointers.
>
> Sure there is no way to do relocation of a
Dear Stephen Warren,
> On 08/08/2012 12:37 PM, Marek Vasut wrote:
> > Dear Stephen Warren,
> >
> >> On 08/08/2012 05:42 AM, Marek Vasut wrote:
> >>> From: Marek Vasut
> >>>
> >>> This patch contains UDM-design.txt, which is document containing
> >>> general description of the driver model. The
On 08/08/2012 12:37 PM, Marek Vasut wrote:
> Dear Stephen Warren,
>
>> On 08/08/2012 05:42 AM, Marek Vasut wrote:
>>> From: Marek Vasut
>>>
>>> This patch contains UDM-design.txt, which is document containing
>>> general description of the driver model. The remaining files contains
>>> descriptio
Dear Stephen Warren,
> On 08/08/2012 05:42 AM, Marek Vasut wrote:
> > From: Marek Vasut
> >
> > This patch contains UDM-design.txt, which is document containing
> > general description of the driver model. The remaining files contains
> > descriptions of conversion process of particular subsyste
On 08/08/2012 05:42 AM, Marek Vasut wrote:
> From: Marek Vasut
>
> This patch contains UDM-design.txt, which is document containing
> general description of the driver model. The remaining files contains
> descriptions of conversion process of particular subsystems.
> diff --git a/doc/driver-mod
lowlevel_init() is called before stack is initialized, so it's not
safe to call directly into C code. Copy this wrapper from omap that
saves off the ip register and sets up a temporary stack. This fixes a
hang using CodeSourcery toolchain.
Signed-off-by: Allen Martin
---
arch/arm/cpu/armv7/teg
Am Mittwoch, den 08.08.2012, 10:27 +0200 schrieb Michal Simek:
> On 08/07/2012 10:10 PM, Stephan Linz wrote:
> > Am Montag, den 06.08.2012, 09:46 +0200 schrieb Michal Simek:
> >> Return value to find out if un/registration was succesful.
> >>
> >> Signed-off-by: Michal Simek
> >>
> >> ---
> >> v2
Hi Graeme,
We are using TI's 8148 EVM board, which is bit modified for NOR booting
and the uboot version is 'U-Boot 2010.06'. On board flash is CFi
compliant (16bit x 16bit) 64Mib. The flash works all fine when we boot
from RAM as normal.
Regards
Amol
On Wed, Aug 8, 2012 at 2:36 AM, Graeme Rus
This driver has been tested on board armadeus apf27.
Signed-off-by: Philippe Reynes
---
arch/arm/include/asm/arch-mx27/imx-regs.h |3 +
arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 ++
drivers/rtc/Makefile |1 +
drivers/rtc/mx27rtc.c
Dear sir,
I'm porting u-boot for mpc8280 based CPU board by taking mpc8260ads
reference, its hanging at some some point. i enabled debug mode.
U-Boot 1.3.1 (Aug 8 2012 - 09:19:16)
MPC8260 Reset Status: Check Stop, External Soft, External Hard
MPC8260 Clock Configuration
- Bus-to-Core
On 08/08/2012 14:26, Dirk Behme wrote:
> The recent U-Boot version 2012.07 has improved drivers
> (e.g. MMC and network/FEC) regarding DCache handling.
> So it should be safe to use the DCache on the i.MX6, now.
>
> Signed-off-by: Dirk Behme
> ---
> include/configs/mx6qsabrelite.h |3 +--
>
Dear Mike Frysinger,
> On Wednesday 08 August 2012 06:52:17 Marek Vasut wrote:
> > This function converts static number to string in preprocessor.
> > This is useful as it allows higher usage of puts() in favour of printf()
>
> a few more to convert:
> include/nios2.h:#define _str_(x) #x
> includ
On 08/08/2012 16:57, Benoît Thébaudeau wrote:
> Hi Stefano,
>
> On 08/08/2012 16:29, Stefano Babic wrote:
>> On 08/08/2012 13:57, Benoît Thébaudeau wrote:
>>> Add support for Freescale's i.MX DryIce RTC, present on i.MX25.
>>>
>>> Signed-off-by: Benoît Thébaudeau
>>> Cc: Wolfgang Denk
>>> Cc: St
On Wednesday 08 August 2012 11:10:34 Lukasz Majewski wrote:
> This commit makes the video subsystem code cache aware.
> Memory allocated for decompressed BMP memory is now cache line aligned.
>
> Flushing of the dcache is also performed after copying BMP data to fb
> address.
i think this is a mo
On Wednesday 08 August 2012 06:52:17 Marek Vasut wrote:
> This function converts static number to string in preprocessor.
> This is useful as it allows higher usage of puts() in favour of printf()
a few more to convert:
include/nios2.h:#define _str_(x) #x
include/configs/astro_mcf5373l.h:#define _
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
The tizen_hd_logo is now aligned to cache line size.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Anatolij Gustschin
---
lib/tizen/tizen_hd_logo.h |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/lib/tizen/tizen_hd_logo.h b/lib/tizen/tizen_hd_logo.
This commit makes the video subsystem code cache aware.
Memory allocated for decompressed BMP memory is now cache line aligned.
Flushing of the dcache is also performed after copying BMP data to fb
address.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Anatolij Gustschin
---
commit 54652991
Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads
to problems for smaller versions of this chip e.g. the 32Mbit version
with deviceid 0x16 on mgcoge. So move the code for this work around to
an own
Hi Stefano,
On 08/08/2012 16:29, Stefano Babic wrote:
> On 08/08/2012 13:57, Benoît Thébaudeau wrote:
> > Add support for Freescale's i.MX DryIce RTC, present on i.MX25.
> >
> > Signed-off-by: Benoît Thébaudeau
> > Cc: Wolfgang Denk
> > Cc: Stefano Babic
> > ---
>
> Hi Benoît,
>
> checkpatch
Add support for Freescale's i.MX DryIce RTC, present on i.MX25.
Signed-off-by: Benoît Thébaudeau
Cc: Wolfgang Denk
Cc: Stefano Babic
---
Changes for v2:
- Define registers with struct instead of #define's.
- Call di_init() only once, except if requested by rtc_reset().
Changes for v3:
- Fix
On 08/08/2012 13:57, Benoît Thébaudeau wrote:
> Add support for Freescale's i.MX DryIce RTC, present on i.MX25.
>
> Signed-off-by: Benoît Thébaudeau
> Cc: Wolfgang Denk
> Cc: Stefano Babic
> ---
Hi Benoît,
checkpatch reports an error when I run your patch. Can you fix it ?
ERROR: code indent
On 08/08/2012 15:55, Benoît Thébaudeau wrote:
> The NAND Flash of the KARO TX25 board is a Samsung K9F1G08U0B with 25-ns R/W
> cycle times. However, the NFC clock for this board was set to 66.5 MHz, so
> using
> the NFC driver in symmetric mode (i.e. 1 NFC clock cycle = 1 NF R/W cycle)
> resulted
The NAND Flash of the KARO TX25 board is a Samsung K9F1G08U0B with 25-ns R/W
cycle times. However, the NFC clock for this board was set to 66.5 MHz, so using
the NFC driver in symmetric mode (i.e. 1 NFC clock cycle = 1 NF R/W cycle)
resulted in NF R/W cycle times of 15 ns, hence corrupted NF access
Signed-off-by: Koen Kooi
---
arch/arm/include/asm/arch-omap4/cpu.h |1 +
arch/arm/include/asm/arch-omap4/i2c.h |2 +-
drivers/i2c/omap24xx_i2c.c|8
3 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h
b/arch/arm/in
On 08/07/12 19:30, Wolfgang Denk wrote:
Most architectures keep the global data pointer (gd) in a register.
This may, or may not be. You should not make any assumptions on how
gd is implemented.
The comment did, the code didn't, as long as gd was a pointer (which
should be a safe assumption)
The recent U-Boot version 2012.07 has improved drivers
(e.g. MMC and network/FEC) regarding DCache handling.
So it should be safe to use the DCache on the i.MX6, now.
Signed-off-by: Dirk Behme
---
include/configs/mx6qsabrelite.h |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff
Add support for Freescale's i.MX DryIce RTC, present on i.MX25.
Signed-off-by: Benoît Thébaudeau
Cc: Wolfgang Denk
Cc: Stefano Babic
---
Changes for v2:
- Define registers with struct instead of #define's.
- Call di_init() only once, except if requested by rtc_reset().
.../drivers/rtc/Makef
Dear Wolfgang,
On Tue, Aug 7, 2012 at 11:07 PM, Wolfgang Denk wrote:
> But "relocation" means that you have to add the address difference
> (aka relocation offset) to _all_ pointers pointing into this area.
> And there is no way to keep track of _all_ such pointers.
Sure there is no way to do r
From: Tomáš Hlaváček
Signed-off-by: Tomas Hlavacek
---
doc/driver-model/UDM-twserial.txt | 47 +
1 file changed, 47 insertions(+)
create mode 100644 doc/driver-model/UDM-twserial.txt
diff --git a/doc/driver-model/UDM-twserial.txt
b/doc/driver-model/UDM-tw
From: Tomas Hlavacek
Signed-off-by: Tomas Hlavacek
---
doc/driver-model/UDM-watchdog.txt | 335 +
1 file changed, 335 insertions(+)
create mode 100644 doc/driver-model/UDM-watchdog.txt
diff --git a/doc/driver-model/UDM-watchdog.txt
b/doc/driver-model/UDM-
From: Tomas Hlavacek
Signed-off-by: Tomas Hlavacek
---
doc/driver-model/UDM-hwmon.txt | 119
1 file changed, 119 insertions(+)
create mode 100644 doc/driver-model/UDM-hwmon.txt
diff --git a/doc/driver-model/UDM-hwmon.txt b/doc/driver-model/UDM-hwmon.t
From: Pavel Herrmann
Signed-off-by: Pavel Herrmann
---
doc/driver-model/UDM-block.txt | 279
1 file changed, 279 insertions(+)
create mode 100644 doc/driver-model/UDM-block.txt
diff --git a/doc/driver-model/UDM-block.txt b/doc/driver-model/UDM-block.t
From: Pavel Herrmann
Signed-off-by: Pavel Herrmann
---
doc/driver-model/UDM-pci.txt | 265 ++
1 file changed, 265 insertions(+)
create mode 100644 doc/driver-model/UDM-pci.txt
diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt
new
Signed-off-by: Marek Vasut
---
doc/driver-model/UDM-net.txt | 434 ++
1 file changed, 434 insertions(+)
create mode 100644 doc/driver-model/UDM-net.txt
diff --git a/doc/driver-model/UDM-net.txt b/doc/driver-model/UDM-net.txt
new file mode 100644
index 00
From: Tomas Hlavacek
Signed-off-by: Tomas Hlavacek
---
doc/driver-model/UDM-rtc.txt | 258 ++
1 file changed, 258 insertions(+)
create mode 100644 doc/driver-model/UDM-rtc.txt
diff --git a/doc/driver-model/UDM-rtc.txt b/doc/driver-model/UDM-rtc.txt
new
From: Viktor Krivak
Signed-off-by: Viktor Krivak
---
doc/driver-model/UDM-pcmcia.txt | 79 +++
1 file changed, 79 insertions(+)
create mode 100644 doc/driver-model/UDM-pcmcia.txt
diff --git a/doc/driver-model/UDM-pcmcia.txt b/doc/driver-model/UDM-pcmcia.t
From: Pavel Herrmann
Signed-off-by: Pavel Herrmann
---
doc/driver-model/UDM-cores.txt | 127
1 file changed, 127 insertions(+)
create mode 100644 doc/driver-model/UDM-cores.txt
diff --git a/doc/driver-model/UDM-cores.txt b/doc/driver-model/UDM-cores.t
From: Viktor Krivak
Signed-off-by: Viktor Krivak
---
doc/driver-model/UDM-spi.txt | 200 ++
1 file changed, 200 insertions(+)
create mode 100644 doc/driver-model/UDM-spi.txt
diff --git a/doc/driver-model/UDM-spi.txt b/doc/driver-model/UDM-spi.txt
new f
From: Viktor Krivak
Signed-off-by: Viktor Krivak
---
doc/driver-model/UDM-power.txt | 88
1 file changed, 88 insertions(+)
create mode 100644 doc/driver-model/UDM-power.txt
diff --git a/doc/driver-model/UDM-power.txt b/doc/driver-model/UDM-power.txt
From: Marek Vasut
Signed-off-by: Marek Vasut
---
doc/driver-model/UDM-mmc.txt | 319 ++
1 file changed, 319 insertions(+)
create mode 100644 doc/driver-model/UDM-mmc.txt
diff --git a/doc/driver-model/UDM-mmc.txt b/doc/driver-model/UDM-mmc.txt
new file
From: Marek Vasut
This patch contains UDM-design.txt, which is document containing
general description of the driver model. The remaining files contains
descriptions of conversion process of particular subsystems.
Signed-off-by: Marek Vasut
---
doc/driver-model/UDM-design.txt | 315
From: Viktor Křivák
Signed-off-by: Viktor Křivák
---
doc/driver-model/UDM-gpio.txt | 106 +
1 file changed, 106 insertions(+)
create mode 100644 doc/driver-model/UDM-gpio.txt
diff --git a/doc/driver-model/UDM-gpio.txt b/doc/driver-model/UDM-gpio.txt
ne
Add missing functions into the timer, so CONFIG_CMD_TIME works.
Signed-off-by: Marek Vasut
Cc: Albert Aribaud
---
arch/arm/cpu/pxa/timer.c |7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c
index a8f7462..d394f79 1006
Kill multiple occurances and redeclaration of xstr in favor of __stringify().
Signed-off-by: Marek Vasut
Cc: Wolfgang Denk
---
include/configs/MPC8308RDB.h|9 +++--
include/configs/amcc-common.h | 25 +++-
include/configs/at91sam9263ek.h |5 +-
This function converts static number to string in preprocessor.
This is useful as it allows higher usage of puts() in favour of printf()
Signed-off-by: Marek Vasut
Cc: Wolfgang Denk
---
include/common.h |1 +
include/linux/stringify.h | 12
2 files changed, 13 insert
Add support for command line "usb reset" or "usb start" to initialize
, "usb stop" to stop multiple USB controllers at once.
Other command like "usb tree" also supports multiple controllers.
New added definitions in header file are:
CONFIG_USB_MULTI
CONFIG_USB_MAX_CONTROLLER_COUNT
Signed-off-by:
1 - 100 of 102 matches
Mail list logo
