On Tue, Jun 12, 2012 at 3:11 AM, Shaohui Xie <shaohui....@freescale.com> wrote: > Provides a tool to build boot Image for PBL(Pre boot loader) which is > used on Freescale CoreNet SoCs, PBL can be used to load some instructions > and/or data for pre-initialization. The default output image is u-boot.pbl, > for more details please refer to doc/README.pblimage. > > Signed-off-by: Shaohui Xie <shaohui....@freescale.com> > --- > changes for v3: > 1. dump config.mk, aligned to comment of Wolfgang Denk; > 2. split one configuration file to two, one is for RCW, one is for PBI > commands, add second entry in mkimage for second configuration file, > aligned to comment of Wood Scott; > 3. refined the README.pblimage; > > Makefile | 6 + > board/freescale/corenet_ds/pbi.cfg | 51 ++++++ > board/freescale/corenet_ds/rcw.cfg | 32 ++++
If I apply this patch, and then run: make P5020DS_SDCARD_config make u-boot.pbl And then follow the instructions from the README: 2). Boot from SD/MMC Write u-boot.pbl to SD/MMC from offset 0x1000. =>tftp 100000 u-boot.pbl =>mmcinfo =>mmc write 100000 8 441 Change SW1[1:5] = off off on on off. Will it work? If I replace the word P5020DS with P3041DS, will it still work? What I'm trying to figure out is whether rcw.cfg and pbi.cfg are truly generic for all 3 systems this patch claims support for, or if I have to replace them with different versions for those P* systems. My guess is that the rcw.cfg needs to be changed, but I wanted to check. If it needs to be changed, then what we need is something like rcw_p5020ds.cfg, rcw_p4080ds.cfg, rcw_p3041.cfg. Andy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
