Dear =?big5?B?QmlsbCBDaGFuKLjir3G6+l9BU1Ip?=,
In message <6f31f8706a8b0e4e96cb192603902509688...@ar-ex-03.pega.corp.PEGATRON>
you wrote:
>
> As we are moving into source codes and start reading start.S, we
> eagerly want to know what software tools do you use in implementing and
> debugg
On 07/06/2011 09:38 PM, Mike Frysinger wrote:
> On Wednesday, July 06, 2011 03:15:08 Helmut Raiger wrote:
>> On 07/05/2011 05:44 AM, Mike Frysinger wrote:
>>> On Monday, July 04, 2011 06:29:51 helmut.rai...@hale.at wrote:
eth_get_dev_by_name() is not safe to use for devname being NULL
as
BDI JTAG
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On
Behalf Of Bill Chan(袪益綸_ASR)
Sent: 2011年7月7日 12:28
To: u-boot@lists.denx.de
Subject: [U-Boot] U-Boot software debug tools ?
Dear Sir from U-Boot,
This is Bill from Taiwan,
P2040RDB Specification:
---
Memory subsystem:
* 4Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
* 128 Mbyte NOR flash single-chip memory
* 256 Kbit M24256 I2C EEPROM
* 16 Mbyte SPI memory
* SD connector to interface with the SD memory card
Ethernet:
* dTSEC1: connected to
You have $85,000USD in cash credit by the International Monetary Funds(IMF) via
western union. Details required: Full Name,Address,Tel,Occupation
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Sir from U-Boot,
This is Bill from Taiwan, we are currently working on a board that runs
Freescale iMX53 CPU and using U-Boot as our bootloader.
As we are moving into source codes and start reading start.S, we
eagerly want to know what software tools do you use in implem
Wolfgang,
On 07/04/2011 05:28 AM, Wolfgang Denk wrote:
> Dear Rob Herring,
>
> In message <1309275583-11763-1-git-send-email-robherri...@gmail.com> you
> wrote:
>> From: Rob Herring
>>
>> This series enables non-PCI AHCI controllers and adds support for Calxeda
>> Highbank platform which uses t
From: Rob Herring
Add support for AHCI controllers that are not PCI based.
Signed-off-by: Rob Herring
Cc: Wolfgang Denk
---
changes in v2:
- fix checkpatch.pl warnings/errors
- fix label indentation
- simplify "sizeof(hd_driveid_t *) * AHCI_MAX_PORTS" to "sizeof(ataid)"
- Add function prototyp
When booting with a ramdisk we bump the amount of memory reserved for
the device tree by FDT_RAMDISK_OVERHEAD. However we did not increase
the actual size in the device tree blob to match.
Its possible on boundary cases that we dont have enough memory according
to the device tree blob and get err
On Wed, 25 May 2011 15:51:07 -0400
Bill Cook wrote:
> On a 8308 based board it was found that the PEX_GLK_RATIO register
> (programmed in arch/powerpc/cpu/mpc83xx/pcie.c) was getting set to 0, This
> was tracked to the fact that the pci express clock frequency was not being
> assigned to the pcie
On Thu, 14 Apr 2011 15:11:43 +0200
Andre Schwarz wrote:
> This patch adds support for Matrix Vision MergerBox.
> It is a Freescale MPC8377 based 3D image preocessing
> platform utilizing Altera Cyclone IV FPGA and Silicon
> Motion SM107 embedded graphics connected via PCI.
> See doc/README.merger
On Mon, 18 Apr 2011 08:10:12 +0800
York Sun wrote:
> On Thu, 2011-04-14 at 14:54 +0200, Andre Schwarz wrote:
> > CPO value and driver strength settings are board specifc.
> > Also allow SPD data fetch from any accessible I2C EEPROM.
> >
> > Signed-off-by: Andre Schwarz
> > ---
> Looks good to m
On Thu, 14 Apr 2011 14:53:37 +0200
Andre Schwarz wrote:
>
> Signed-off-by: Andre Schwarz
> ---
applied to u-boot-mpc83xx.
Thanks,
Kim
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Thu, 14 Apr 2011 14:57:40 +0200
Andre Schwarz wrote:
> Running on mpc837x without CONFIG_FSL_ESDHC leads to
> i2c1_clk not being set at all. It is bound to clock
> of encryption module. fix this.
>
>
> Signed-off-by: Andre Schwarz
> ---
applied to u-boot-mpc83xx.
Thanks,
Kim
On Wed, 15 Jun 2011 14:08:29 -0700
"Ira W. Snyder" wrote:
> On Tue, Mar 01, 2011 at 02:40:55PM -0800, Ira W. Snyder wrote:
> > Commit 359ec4931944adb885882deb9b781e4095eabc94 broke support for the
> > Freescale DMA engine on the 83xx parts. This is due to using registers
> > which do not exist on
Wolfgang Denk,
Please pull new MergerBox board + minor fixes for 83xx for u-boot
v2011.09:
The following changes since commit 79642098a8345e2506ab0ff02e8c7ac4da405d0c:
Add support for Network Space v2 and parents (2011-07-04 10:55:28 +0200)
are available in the git repository at:
git://git.
On Thu, 28 Apr 2011 15:01:29 -0500
Timur Tabi wrote:
> Remove an empty board_early_init_f() from the MPC8323ERD and MPC360ERDK
> boards.
>
> Signed-off-by: Timur Tabi
> ---
applied to u-boot-mpc83xx.
Thanks,
Kim
___
U-Boot mailing list
U-Boot@list
Hi there
We're pleased to inform that your organisation has been invited to participate
in the exclusive monthly Art of England Magazine September 2011 edition, and
beyond.
Now seven years old, the Art of England Magazine offers you an excellent
monthly targeted distribution throughout the UK
On Wednesday, July 06, 2011 17:51:58 Andre Renaud wrote:
> This allows intelligent booting of FIT (& the legacy style) images from
> SPI flash. Basically it means that you don't have to guess at the image
> length, so data reads are more optimal (& hopefully faster).
this looks like largely a copy
This allows intelligent booting of FIT (& the legacy style) images from
SPI flash. Basically it means that you don't have to guess at the image
length, so data reads are more optimal (& hopefully faster).
Signed-off-by: Andre Renaud
---
Index: common/cmd_sf.c
Dear Christopher Harvey,
In message <20110706205857.gb2...@harvey-pc.matrox.com> you wrote:
>
> > Also delete "for ARM", and s/arm//. This is not ARM specific.
>
> I don't understand, I found the following snippet in
> arch/arm/lib/board.c
>
>--addr defined and set here--
>
> gd
Dear Valentin Longchamp,
In message <4e146e9f.4000...@keymile.com> you wrote:
>
> In the POST documentation, it is clearly stated:
>
> > 2) The results of tests shall be saved so that it will be possible to
> >retrieve them from Linux.
>
> I have two questions here:
>
> - I don't find wher
On Mon, Jul 04, 2011 at 09:43:24PM +0200, Wolfgang Denk wrote:
> Dear Christopher Harvey,
>
> In message <20110704174348.gc3...@harvey-pc.matrox.com> you wrote:
> > Signed-off-by: Christopher Harvey
> > ---
> > doc/README.arm-relocation |9 -
> > 1 files changed, 8 insertions(+), 1 d
On 07/06/11 21:53, Albert ARIBAUD wrote:
> Hi Igor,
>
> Le 04/07/2011 11:00, Igor Grinberg a écrit :
>> CONFIG_MACH_TYPE can be used to set the machine type number in the
>> common arm code instead of setting it in the board code.
>>
>> Signed-off-by: Igor Grinberg
>> ---
>> README
On Wednesday, July 06, 2011 03:15:08 Helmut Raiger wrote:
> On 07/05/2011 05:44 AM, Mike Frysinger wrote:
> > On Monday, July 04, 2011 06:29:51 helmut.rai...@hale.at wrote:
> >> eth_get_dev_by_name() is not safe to use for devname being NULL
> >> as it uses strcmp. This patch makes it return NULL i
Hi Simon,
Le 05/07/2011 15:20, Simon Schwarz a écrit :
> This is an RFC on how this can be done.
Then please tag the subject with [RFC] next time!
Amicalement,
--
Albert.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listi
Hi Igor,
Le 04/07/2011 11:00, Igor Grinberg a écrit :
> CONFIG_MACH_TYPE can be used to set the machine type number in the
> common arm code instead of setting it in the board code.
>
> Signed-off-by: Igor Grinberg
> ---
> README | 12
> arch/arm/lib/board.c |5
On Wed, 6 Jul 2011 09:42:52 +0200
Simon Schwarz wrote:
> Hi,
>
> thanks for your feedback!
>
> I will address the style problems - didn't run checkpatch for the RFC
> - sorry my fault.
>
> > Why are you writing to NAND as part of bootm?
> >
> > If you just want access to the results of the FDT
From: Helmut Raiger
When writing 0x4000 to the unlockend_blkaddr register, large writes to
a 2k page NAND sometimes fail. The current kernel driver writes 0x
to this register for V2 of the nand controller.
However on an i.MX31 this also fixes writes larger than 32MB.
The datasheet is very un
On 07/06/2011 05:46 PM, Torsten Koschorrek wrote:
> understood. I CCed you for the MAINTAINERS patch. I hope this was correct.
Ok. I will put this into u-boot-imx together with your patch for the
scb9328, if there will be no more comments.
> Thanks, and sorry for the noise regarding some basic ru
Stefano Babic wrote:
> On 07/04/2011 11:34 AM, Torsten Koschorrek wrote:
>> Torsten Koschorrek wrote:
>>> Signed-off-by: Torsten Koschorrek
>>> ---
>>> MAINTAINERS |2 +-
>>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index c462ae2
Signed-off-by: Torsten Koschorrek
---
Changes for v2:
- order of list
- cpu description i.MXL added
MAINTAINERS |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2bba7b4..990d508 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -
From: Dirk Behme
Add all missing boards with CPU==armv7 from boards.cfg
to MAKEALL.
Signed-off-by: Dirk Behme
---
MAKEALL | 12
1 file changed, 12 insertions(+)
Index: u-boot.git/MAKEALL
===
--- u-boot.git.orig/MA
Hello,
In the POST documentation, it is clearly stated:
> 2) The results of tests shall be saved so that it will be possible to
>retrieve them from Linux.
I have two questions here:
- I don't find where the result actually is saved. Was this implemented already
? Was the logbuffer intented
Hi Simon,
On Wed, Jul 6, 2011 at 7:32 AM, Simon Glass wrote:
> Hi Chander,
>
> On Mon, Jun 27, 2011 at 1:37 AM, Chander Kashyap
> wrote:
>>
>> Origen board is based upon S5PV310 SoC which is similiar to
>> S5PC210 SoC.
>>
>> Signed-off-by: Chander Kashyap
>> ---
>> MAINTAINERS
Dear Heiko Schocher,
In message <4e144710.7020...@denx.de> you wrote:
> Hello Thomas,
>
> I just debugging some usb issues on an dm365 based board. I noticed
> that if no usb device is connected to the board, the "usb start"
> command does have a long timeout (also have access to an dm365evm
> bo
Hi Chander,
On Mon, Jun 27, 2011 at 1:37 AM, Chander Kashyap wrote:
> Origen board is based upon S5PV310 SoC which is similiar to
> S5PC210 SoC.
>
> Signed-off-by: Chander Kashyap
> ---
> MAINTAINERS |1 +
> board/samsung/origen/Makefile| 46
> board
> If you just want access to the results of the FDT/ATAG preparation that
> bootm does, consider using the bootm subcommands to prepare them, then
> normal U-Boot commands to write to NAND.
Me again. I rethought and the problem with bootm is that the
subfunctions (bootm_linux_fdt/do_bootm_linux) ar
Hello Thomas,
I just debugging some usb issues on an dm365 based board. I noticed
that if no usb device is connected to the board, the "usb start"
command does have a long timeout (also have access to an dm365evm
board, same behaviour). Found the reason for this big timeout here:
./drivers/usb/mu
On 2011-07-05 16:16, Gupta, Ajay Kumar wrote:
>> (On our custom board, we have added an external vbus supply to be able
>> to draw> 100 mA.)
> So it seems you are using PHY inside TPS659x but external Vbus for which
> I think you need to,
> 1. Explicitly set "OTG_CTRL.D5 = 0" so that PHY doesn't d
Hi,
Sorry for the shameless advertising, but I thought that perhaps
someone would be interested to know that I've started working on this,
and I was able to convince ppl here to offer a small bounty on getting
this work done, and done properly. So I've posted a project on
freelancer.com
(http
Dear Detlev Zundel,
In message you wrote:
>
> > I'd say clear/set/toggle are changeable, don't see any legit
> > return-value-usage here. For 100% backward compatibility, one could
> > leave them as they are and use 0|1 as new actions with return 0, as
> > proposed.
Hm... I think it would be be
Offsets to registers may be needed in asm code. This patch adds automated
generation of these offsets form C structures.
Signed-off-by: Matthias Weisser
---
Changes in v2:
- Added a change in Makefile which was in wrong patch of the patch set
arch/arm/cpu/arm926ejs/mx25/Makefile |2
Adding support for mxc_gpio driver for imx25 and fix names of registers in tx25
board.
Signed-off-by: Matthias Weisser
---
Changes in v2:
- New in patch set due to review of v1
arch/arm/include/asm/arch-mx25/imx-regs.h | 10 --
board/karo/tx25/tx25.c| 26 ++
zmx25 is a board based on imx25 SoC, 64 Megs of LPDDR, 32 Megs of NOR flash, an
optional NAND flash.
Signed-off-by: Matthias Weisser
---
Changes in v2:
- Using mxc_gpio now
- Factored out asm macros
MAINTAINERS|1 +
arch/arm/include/asm/arch-mx25/macro.h |
Adding support for USB host on imx25 using the internal PHY. Changing the name
of base address define for imx31 to get some unification.
Signed-off-by: Matthias Weisser
---
Changes in v2:
- Partially unified for imx25 and imx31
arch/arm/include/asm/arch-mx31/imx-regs.h |2 +-
drivers/us
imx25 used the wrong reset.c from imx27
Signed-off-by: Matthias Weisser
---
Changes in v2:
- Removed unrelated change
arch/arm/cpu/arm926ejs/mx25/Makefile |6 ++
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx25/Makefile
b/arch/arm/cpu/arm926e
Need this function for autoboot keyd
Signed-off-by: Matthias Weisser
---
arch/arm/cpu/arm926ejs/mx25/timer.c | 12
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx25/timer.c
b/arch/arm/cpu/arm926ejs/mx25/timer.c
index 14f0c2d..7c8a71b 1006
zmx25 is a board based on imx25 SoC, 64 Megs of LPDDR, 32 Megs of NOR flash and
an optional NAND flash. Some additons to imx25 SoC are made to fully support
the hardware on the board.
Changes in v2:
- Using mxc_gpio now
- Partially unified usb for imx25 and imx31
- Factored out asm macros
M
Hello Lukasz,
Lukasz Majewski wrote:
> On Wed, 06 Jul 2011 07:56:20 +0200
> Heiko Schocher wrote:
>
>> Hello Mike,
>>
>> Mike Frysinger wrote:
>>> On Tuesday, July 05, 2011 08:23:41 Lukasz Majewski wrote:
This commit adds I2C software support for Samsung's S5PC110
family of processors.
On Wed, 06 Jul 2011 07:56:20 +0200
Heiko Schocher wrote:
> Hello Mike,
>
> Mike Frysinger wrote:
> > On Tuesday, July 05, 2011 08:23:41 Lukasz Majewski wrote:
> >> This commit adds I2C software support for Samsung's S5PC110
> >> family of processors.
> >> The generic drivers/i2c/soft_i2c framewo
Hi Andreas,
> I'd say clear/set/toggle are changeable, don't see any legit
> return-value-usage here. For 100% backward compatibility, one could
> leave them as they are and use 0|1 as new actions with return 0, as
> proposed.
>
> So these variants:
> gpio clear|0 => set to output, write 0, retu
Hi Daniel,
On Tuesday 05 July 2011 09:56 PM, Daniel Schwierzeck wrote:
> [ane...@ti.com:
> 1. Changed the definition of OBJTREE and the way 'obj' is defined.
> 2. Defined a flag to identify regular U-Boot build
> 3. Taking care of autoconf.mk etc for SPL due to changed OBJTREE
> ]
>
> [daniel.schw
> -Original Message-
> From: Ajay Bhargav [mailto:ajay.bhar...@einfochips.com]
> Sent: Wednesday, July 06, 2011 12:09 PM
> To: Prafulla Wadaskar
> Cc: u-boot@lists.denx.de; Ajay Bhargav
> Subject: [PATCH 1/2] Armada100: MFP macro naming correction
>
> MFP macros for UART3 updated.
>
> S
> -Original Message-
> From: Ajay Bhargav [mailto:ajay.bhar...@einfochips.com]
> Sent: Wednesday, July 06, 2011 12:09 PM
> To: Prafulla Wadaskar
> Cc: u-boot@lists.denx.de; Ajay Bhargav
> Subject: [PATCH 2/2] Armada100: Add Board Support for Marvell GuruPlug-
> Display
>
> This patch add
Hi,
thanks for your feedback!
I will address the style problems - didn't run checkpatch for the RFC
- sorry my fault.
> Why are you writing to NAND as part of bootm?
>
> If you just want access to the results of the FDT/ATAG preparation that
> bootm does, consider using the bootm subcommands to
From: Helmut Raiger
Signed-off-by: Helmut Raiger
---
drivers/mtd/nand/mxc_nand.c | 19 +--
1 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 2a8dd7e..78e07cc 100644
--- a/drivers/mtd/nand/mxc_nand.c
On 07/05/2011 05:44 AM, Mike Frysinger wrote:
> On Monday, July 04, 2011 06:29:51 helmut.rai...@hale.at wrote:
>> eth_get_dev_by_name() is not safe to use for devname being NULL
>> as it uses strcmp. This patch makes it return NULL if devname NULL
>> is passed.
> i'm not sure about this. passing N
58 matches
Mail list logo
