stack_setup is modified to initialize the stack on the correct address in
DRAM accroding to the typical memory configuration described in
README and the related CONFIG_* macro definitions. This makes macro
CONFIG_MEMORY_UPPER_CODE no longer necessry. This was introduced
and used only by this board
Ok,
I'm trying to reduce boot time and i don't want to omit anything!
I know that console is fundamental, but i need to disable it. After some
modifies it seems like u-boot execute an infinite loop, waiting for unknown
something.
Are there some special file (e.g. cpu/mpc512x/serial.c,
include
Wolfgang Wegner wrote:
> Hi,
>
> thank you all for all the comments so far.
>
> It seems I have at least 2 problems:
> - my gcc (m68k-elf-gcc (Sourcery G++ Lite 4.3-208) 4.3.3) does not
> produce correctly relocatable code; no matter if I give -fPIC or
> not (-mrelocatable is not accepted at
Dear Nishanth Menon,
In message <4aeb4dc5.9040...@gmail.com> you wrote:
>
> for some wierd reason, it does not seem to take the include/config.mk
> file (where the defines are present)..
>
> now, if i do a local clone of the cloned directory, it builds just fine!
> gotta dig at it a little more..
Dear Angelo,
In message <630811.21371...@web23106.mail.ird.yahoo.com> you wrote:
>
> I'm working on freescale ev. board ads5121ev and I'm trying to remove serial
> console support.
Which sense would this make?
> Do you know the right procedure to remove it?
The right procedure is to keep it! U
Gadiyar, Anand said the following on 10/30/2009 06:54 PM:
>> Hi,
>>
>> I was trying to build u-boot for omap3_3430sdp and
>> omap3_zoom2, and the build fails with the error below.
>>
>> I'm on commit f2b4bc0 from the master branch. I'm
>> using CodeSourcery's 2008q3 toolchain.
>> The commands I ran
Hi all,
I'm working on freescale ev. board ads5121ev and I'm trying to remove serial
console support.
Do you know the right procedure to remove it?
Thanks in advance.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/l
On Sat, 31 Oct 2009 00:35:04 +0530
Sandeep Gopalpet wrote:
> Moved the mdio regs out of the tsec structure,and
> provided different offsets for tsec base and mdio
> base so that provision for etsec2.0 can be provided.
>
> This patch helps in providing the support for etsec2.0
> In etsec2.0, the
Dear Wolfgang Wegner,
In message <1256914121-26044-1-git-send-email-w.weg...@astro-kom.de> you wrote:
> write_buff_nb() introduces quite an amount of duplicate code compared to
> write_buff(), but I did not find an elegant solution to partition them.
>
> Signed-off-by: Wolfgang Wegner
> ---
> d
I referred to this
http://git.infradead.org/mtd-2.6.git?a=commit;h=69423d99fc182a81f3c5db3eb5c140acc6fc64be
and picked up the MTD NAND specific stuff
> From: Sandeep Paulraj
>
> This patch adds support for NANDs greater than 2 GB.
> Patch is based on the MTD NAND driver in the kernel.
>
> Sig
From: Sandeep Paulraj
This patch adds support for NANDs greater than 2 GB.
Patch is based on the MTD NAND driver in the kernel.
Signed-off-by: Sandeep Paulraj
---
Tested this on the DaVinci DM355 EVM.
drivers/mtd/nand/nand_base.c | 29 +--
drivers/mtd/nand/nand_bbt.
1. Modified the tsec_mdio structure to include the new regs
2. Modified the MDIO_BASE_ADDR so that it will handle both
older version and new version of etsec.
Signed-off-by: Sandeep Gopalpet
---
include/asm-ppc/immap_83xx.h |2 +-
include/asm-ppc/immap_85xx.h |6 +-
include/asm-ppc/i
Moved the mdio regs out of the tsec structure,and
provided different offsets for tsec base and mdio
base so that provision for etsec2.0 can be provided.
This patch helps in providing the support for etsec2.0
In etsec2.0, the MDIO register space and the etsec reg
space are different.
Also, moved t
On Friday 30 October 2009 12:47:33 Scott Wood wrote:
> Mike Frysinger wrote:
> Should I drop the easylogo change, if it's currently being built outside
> the toplevel makefile system?
if you tested what you said (setting the var from the cmdline), then i'd leave
it. we can address poor tool inte
On Fri, Oct 30, 2009 at 6:47 PM, Dirk Behme wrote:
> Gadiyar, Anand wrote:
>> Hi,
>>
>> I was trying to build u-boot for omap3_3430sdp and
>> omap3_zoom2, and the build fails with the error below.
>>
>> I'm on commit f2b4bc0 from the master branch. I'm
>> using CodeSourcery's 2008q3 toolchain.
>>
Nishant Menon wrote:
> On Fri, Oct 30, 2009 at 6:47 PM, Dirk Behme wrote:
>> Gadiyar, Anand wrote:
>>> Hi,
>>>
>>> I was trying to build u-boot for omap3_3430sdp and
>>> omap3_zoom2, and the build fails with the error below.
>>>
>>> I'm on commit f2b4bc0 from the master branch. I'm
>>> using Code
> Hi,
>
> I was trying to build u-boot for omap3_3430sdp and
> omap3_zoom2, and the build fails with the error below.
>
> I'm on commit f2b4bc0 from the master branch. I'm
> using CodeSourcery's 2008q3 toolchain.
> The commands I ran were:
>
> make CROSS_COMPILE=arm-none-linux-gnueabi-
> omap3_
Gadiyar, Anand wrote:
> Hi,
>
> I was trying to build u-boot for omap3_3430sdp and
> omap3_zoom2, and the build fails with the error below.
>
> I'm on commit f2b4bc0 from the master branch. I'm
> using CodeSourcery's 2008q3 toolchain.
> The commands I ran were:
>
> make CROSS_COMPILE=arm-none-li
Mike Frysinger wrote:
> then lets go the route you proposed -- invert the logic. default includes
> the
> -pedantic flag while the HOSTCOMPILE_NOPED does not. and we use that for the
> code that needs newer standards.
OK.
Should I drop the easylogo change, if it's currently being built outsi
On Friday 30 October 2009 11:53:43 Scott Wood wrote:
> On Fri, Oct 30, 2009 at 09:28:04AM +0100, Wolfgang Denk wrote:
> > Scott Wood wrote:
> > > We can't build everything with it, as we have a lot of code that is
> > > incompatible. There were already exceptions in the makefiles for these
> > > f
On Fri, Oct 30, 2009 at 01:20:58PM +0800, HeLei wrote:
>
> Hi, all
Hi, please wrap your lines at 75 or so characters -- and definitely don't
paste code as all one line.
> I'm a little confused on NAND read operation.
> According to NAND character, NAND flash is read page by page, which mean's
>
On Fri, 30 Oct 2009 15:17:40 +
"Thompson, Nick (GE EntSol, Intelligent Platforms)"
wrote:
>
> From: Kim Phillips [mailto:kim.phill...@freescale.com]
> Sent: 30 October 2009 14:57
> > On Fri, 30 Oct 2009 09:26:12 +0100
> > Wolfgang Denk wrote:
> >
> > > Dear Kim Phillips,
> > >
> > > In me
Hi,
does anybody have code for OMAP3 SPI? Zippy board [1] for Beagle
connects ENC28J60 ethernet via OMAP3's SPI4. Or even better: Does
anybody have already done any Zippy U-Boot work?
Thanks
Dirk
[1]
http://www.tincantools.com/product.php?productid=16147&cat=0&page=1&featured
___
Hi,
I was trying to build u-boot for omap3_3430sdp and
omap3_zoom2, and the build fails with the error below.
I'm on commit f2b4bc0 from the master branch. I'm
using CodeSourcery's 2008q3 toolchain.
The commands I ran were:
make CROSS_COMPILE=arm-none-linux-gnueabi- omap3_3430sdp_config; make
C
Using seperate function calls for each bit-bang of slave serial
load can be painfully slow. This patch adds the possibility to
supply a block write function that loads the complete block of
data in one call (like it can already be done with Altera FPGAs).
On an MCF5373L (240 MHz) loading an XC3S400
On Fri, Oct 30, 2009 at 09:28:04AM +0100, Wolfgang Denk wrote:
> Dear Scott Wood,
>
> In message <20091029161835.ga28...@loki.buserror.net> you wrote:
> >
> > We can't build everything with it, as we have a lot of code that is
> > incompatible. There were already exceptions in the makefiles for t
imxtract currently can not handle compressed images. This patch adds
handling for bzip2 and zip compression. In both cases, a destination
address has to be specified for extraction.
Signed-off-by: Wolfgang Wegner
---
common/cmd_ximg.c | 82 +---
From: Kim Phillips [mailto:kim.phill...@freescale.com]
Sent: 30 October 2009 14:57
> On Fri, 30 Oct 2009 09:26:12 +0100
> Wolfgang Denk wrote:
>
> > Dear Kim Phillips,
> >
> > In message <20091029182304.469c9f7f.kim.phill...@freescale.com> you wrote:
> > > if (field < PIN_MUX_NUM_FIELDS &&
> > >
Hi list,
sorry, there should have been more description on top, but somehow I
messed up the commit log message and did not realize it until now. :-(
Implementation of non-blocking flash write/erase/status check functions.
Enable with CONFIG_SYS_FLASH_CFI_NONBLOCK
These can be useful to erase f
On Fri, 30 Oct 2009 09:26:12 +0100
Wolfgang Denk wrote:
> Dear Kim Phillips,
>
> In message <20091029182304.469c9f7f.kim.phill...@freescale.com> you wrote:
> > if (field < PIN_MUX_NUM_FIELDS &&
> > (value & ~PIN_MUX_FIELD_MASK) == 0) {
> >
> > > + int offset = field * PIN_MU
write_buff_nb() introduces quite an amount of duplicate code compared to
write_buff(), but I did not find an elegant solution to partition them.
Signed-off-by: Wolfgang Wegner
---
drivers/mtd/cfi_flash.c | 440 ++-
include/flash.h |3 +
2
Add support for I2C in i.MX27 chip.
Tested on imx27_visstrim_m10 board.
Signed-off-by: Javier Martin
--
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 8e10fbb..63a8085 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -2,6 +2,8 @@
* i2c driver for Freescale mx
Add proper register definitions, macros and clock functions required
for I2C driver to be developed.
Signed-off-by: Javier Martin
--
diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c
index 808371f..540ef0c 100644
--- a/cpu/arm926ejs/mx27/generic.c
+++ b/cpu/arm926ejs/mx27
Tested on two esd boards. Works fine!
Matthias
On Tuesday 27 October 2009 16:41, Stefan Roese wrote:
> This patchset will consolidate the linker scripts for PPC4xx.
> My plan is to push this in the next merge window. I've pushed
> this patchset in the "4xx-linker-script" branch of the ppc4xx
> re
Hello Wolfgang,
The following changes since commit f2b4bc04d6aed6be712d236dab48ac4c4da22cbf:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git next
Mike Frysinger (2):
Blackfi
Wolfgang,
can you please apply this patch. It currently prevents Stefan
to proceed with my other 4xx patches. Alternatively this
could be done by Stefan through the 4xx repo.
Regards,
Matthias
On Monday 26 October 2009 09:55, Matthias Fuchs wrote:
> This patch is in preparation for the upcoming
Hi,
thank you all for all the comments so far.
It seems I have at least 2 problems:
- my gcc (m68k-elf-gcc (Sourcery G++ Lite 4.3-208) 4.3.3) does not
produce correctly relocatable code; no matter if I give -fPIC or
not (-mrelocatable is not accepted at all), I do not get any
entries in .go
Hui.Tang,
On Fri, Oct 30, 2009 at 3:39 AM, Hui.Tang wrote:
> Add GEC2410 default config.
>
> Signed-off-by: Hui.Tang
> ---
> include/configs/gec2410.h | 275
> +
>
+
+#define CONFIG_BOOTDELAY 3
+/*#define CONFIG_BOOTARGS "root=ramfs devf
Hui.Tang,
On Fri, Oct 30, 2009 at 3:39 AM, Hui.Tang wrote:
> Fix CS8900 dev->priv not init issue.
>
> Signed-off-by: Hui.Tang
> ---
> drivers/net/cs8900.c |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
> index 587f7f6.
This patch introduces a weak default function for post_hotkey_pressed(),
returning 0, for boards without hotkey support. The long-running tests
won't be started on those boards. This default function was implemented
in many board directories. By implementing this weak default we can
remove all thos
I have some questions about MTD flash partitioning in OMAP3EVM.
>From the OMAP3 manual:
0x-0x0008 : "X-Loader-ONENAND"
0x0008-0x0024 : "U-Boot-ONENAND"
0x0024-0x0028 : "Boot Env-ONENAND"
0x0028-0x0078 : "Kernel-ONENAND"
0x0078-0x0800 : "File System-ONENA
Add gec2410 in MAKEALL.
Signed-off-by: Hui.Tang
---
MAKEALL |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index d63c5c2..fffa58a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -548,6 +548,7 @@ LIST_ARM9=" \
cp926ejs\
Add GEC2410 Maintainers.
Signed-off-by: Hui.Tang
---
MAINTAINERS |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index d70a9d2..6ecba41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -429,6 +429,10 @@ Timur Tabi
MPC8349E-mITX MPC834
Add missing function for CONFIG_NAND_SPL
Signed-off-by: Hui.Tang
---
drivers/mtd/nand/s3c2410_nand.c | 29 -
1 files changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index f2f3e72..7fefe10 1006
Fix CS8900 dev->priv not init issue.
Signed-off-by: Hui.Tang
---
drivers/net/cs8900.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index 587f7f6..962b74c 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -320,
GEC2410 Boot from NAND FLASH.
Signed-off-by: Hui.Tang
---
cpu/arm920t/start.S | 36
1 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 114427a..d8b832a 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/a
Add GEC2410 Clock Setting.
Signed-off-by: Hui.Tang
---
cpu/arm920t/s3c24x0/timer.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c
index 20cedd4..d4787b9 100644
--- a/cpu/arm920t/s3c24x0/timer.c
+++ b/cpu/arm920t/
Add gec2410_config option for GEC2410
Signed-off-by: Hui.Tang
---
Makefile |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/Makefile b/Makefile
index bcb3fe9..2de0b1d 100644
--- a/Makefile
+++ b/Makefile
@@ -2951,6 +2951,13 @@ davinci_dm365evm_config :unconf
Add GEC2410 default config.
Signed-off-by: Hui.Tang
---
include/configs/gec2410.h | 275 +
1 files changed, 275 insertions(+), 0 deletions(-)
create mode 100644 include/configs/gec2410.h
diff --git a/include/configs/gec2410.h b/include/configs/gec24
New Board GEC2410 Setup.
Signed-off-by: Hui.Tang
---
board/gec/gec2410/Makefile| 54 +
board/gec/gec2410/README | 85
board/gec/gec2410/config.mk | 32 +++
board/gec/gec2410/flash.c | 417 +
board/gec/gec2410/
GEC2410 boot from NAND FLASH.
Signed-off-by: Hui.Tang
---
nand_spl/board/gec/gec2410/Makefile | 102 +
nand_spl/board/gec/gec2410/config.mk | 40 +
nand_spl/board/gec/gec2410/u-boot.lds | 60 +++
3 files changed, 202 insertions(
Dear Wolfgang Denk
> Dear Jens Scharsig,
>
> In message <4ae99ba5.3090...@bus-elektronik.de> you wrote:
>> By the way, the AT91RM9200.h. has hundreds of style problems.
>> This requires a complete revision of the AT91RM9200.h.
>> I can try this, but will take a while and I can't test other
>> RM
Hi Wolfgang,
On Tuesday 27 October 2009 16:42:03 Stefan Roese wrote:
> This patch extends the mkconfig script to automatically create a define
> for the board directory in include/config.h:
>
> #define CONFIG_BOARDDIR board/amcc/canyonlands
>
> This is needed for the upcoming PPC4xx linker scrip
Dear Jens Scharsig,
In message <4ae99ba5.3090...@bus-elektronik.de> you wrote:
>
> By the way, the AT91RM9200.h. has hundreds of style problems.
> This requires a complete revision of the AT91RM9200.h.
> I can try this, but will take a while and I can't test other
> RM9200 boards.
I am aware of
Dear Scott Wood,
In message <20091029161835.ga28...@loki.buserror.net> you wrote:
>
> We can't build everything with it, as we have a lot of code that is
> incompatible. There were already exceptions in the makefiles for these
> files. Fixing that code is beyond the scope of this change, especia
Dear Kim Phillips,
In message <20091029182304.469c9f7f.kim.phill...@freescale.com> you wrote:
>
> > + if (field < PIN_MUX_NUM_FIELDS &&
> > + (value & ~PIN_MUX_FIELD_MASK) == 0) {
>
> the second line should not be indented as though it is the code
> subblock; it should
56 matches
Mail list logo
