Hi, I was trying to build u-boot for omap3_3430sdp and omap3_zoom2, and the build fails with the error below.
I'm on commit f2b4bc0 from the master branch. I'm using CodeSourcery's 2008q3 toolchain. The commands I ran were: make CROSS_COMPILE=arm-none-linux-gnueabi- omap3_3430sdp_config; make CROSS_COMPILE=arm-none-linux-gnueabi- Any ideas what I'm doing wrong? Thanks in advance, Anand make -C examples/standalone all make[1]: Entering directory `/data/git/denx-uboot/u-boot/examples/standalone' arm-none-linux-gnueabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/data/git/denx-uboot/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /data/arm-2008q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/include -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv5 -Wall -Wstrict-prototypes -fno-stack-protector -g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/data/git/denx-uboot/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /data/arm-2008q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/include -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv5 -I.. -Bstatic -T u-boot.lds -Ttext 0x80e80000 -o .c arm-none-linux-gnueabi-gcc: no input files make[1]: *** [.c] Error 1 make[1]: Leaving directory `/data/git/denx-uboot/u-boot/examples/standalone' make: *** [examples/standalone] Error 2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
