Add missing function for CONFIG_NAND_SPL
Signed-off-by: Hui.Tang <zetal...@gmail.com>
---
drivers/mtd/nand/s3c2410_nand.c | 29 ++++++++++++++++++++++++-----
1 files changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index f2f3e72..7fefe10 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -36,6 +36,17 @@
#define S3C2410_ADDR_NALE 4
#define S3C2410_ADDR_NCLE 8
+#ifdef CONFIG_NAND_SPL
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ buf[i] = readb(this->IO_ADDR_R);
+}
+#endif
+
static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
@@ -83,9 +94,10 @@ void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int
mode)
static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
- ecc_code[0] = NFECC0;
- ecc_code[1] = NFECC1;
- ecc_code[2] = NFECC2;
+ struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ ecc_code[0] = readb(&nand->NFECC);
+ ecc_code[1] = readb(&nand->NFECC + 1);
+ ecc_code[2] = readb(&nand->NFECC + 2);
debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
@@ -100,7 +112,7 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd,
u_char *dat,
read_ecc[2] == calc_ecc[2])
return 0;
- printf("s3c2410_nand_correct_data: not implemented\n");
+ debugX(1, "s3c2410_nand_correct_data: not implemented\n");
return -1;
}
#endif
@@ -130,8 +142,13 @@ int board_nand_init(struct nand_chip *nand)
/* initialize nand_chip data structure */
nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA;
+ nand->select_chip = NULL;
+
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
+#ifdef CONFIG_NAND_SPL
+ nand->read_buf = nand_read_buf;
+#endif
/* hwcontrol always must be implemented */
nand->cmd_ctrl = s3c2410_hwcontrol;
@@ -142,7 +159,9 @@ int board_nand_init(struct nand_chip *nand)
nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
nand->ecc.calculate = s3c2410_nand_calculate_ecc;
nand->ecc.correct = s3c2410_nand_correct_data;
- nand->ecc.mode = NAND_ECC_HW3_512;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
+ nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
--
1.6.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
