I have located the problem. I thought these were forged return addresses
but they actually were coming from an errant server. We put a new system
up the other day behind our firewall that should not have been able to do
anything. Sendmail was installed by mistake and I'm afraid it was used to
rel
Can you understand where messages are created?
If they are created outside -email system, they should not be accepted.
If they are generated inside the system, or coming from a trusted system
(for which you don't apply chkuser), they are always accepted.
Check carefully.
Tonino
d...@upnorthwe
They are vpopmail users.
Thanks
Doug
> Are vpopmail
users or system users?
>
> Tonino
>
>
d...@upnorthwebcreations.com ha scritto:
>> What's happening is
I'm getting a lot of rejected emails that say they
>> came from
my server from users that don't exist on my server. I've
>>
checked the syste
Are vpopmail users or system users?
Tonino
d...@upnorthwebcreations.com ha scritto:
What's happening is I'm getting a lot of rejected emails that say they
came from my server from users that don't exist on my server. I've
checked the system and everything seems to be OK and the emails I
think
What's happening is I'm getting a lot of rejected emails that say they
came from my server from users that don't exist on my server. I've checked
the system and everything seems to be OK and the emails I think have a
forged return on them. I just want them to go to a junk directory or be
deleted.
d...@upnorthwebcreations.com ha scritto:
I looked in the archives and found that there apparently is no way for
chkuser to reject users that don't exist on my server? If this is
correct is there anyway of deflecting them to a bit bucket. I have
checked my server over and over again for relay an
I looked in the archives and found that there apparently is no way for
chkuser to reject users that don't exist on my server? If this is correct
is there anyway of deflecting them to a bit bucket. I have checked my
server over and over again for relay and it is isn't but I'm getting all
these ema
Hi Zeki,
this problem is already known.
I have to add this check to chkuser since one year, but I had no time
until now.
I have a bunch of fixes/features to add, I will try to find spare time
and fix them.
Thanks,
Tonino
Kubilay Akyol (Radore Telekom) ha scritto:
Hello,
I found a problem
Hello,
I found a problem on chkuser. Maybe there is a solution, that I don't know.
If I sent e-mail from e.g. Gmail to [EMAIL PROTECTED] which domain.com hosted
in my qmail, chkuser blocks it and says
PERM_FAILURE: SMTP Error (state 13): 550 5.1.1 sorry, no mailbox here by
that name (chkuser)
Bu
Dennis Erickson wrote:
Just built new toaster box -
Here is the problem I am encountering when i attempt to send mail.
from smtpd log
CHKUSER rejected sender: from <[EMAIL PROTECTED]:[EMAIL PROTECTED]:>
remote rcpt <> : invalid sender MX domain
I am able to receive emails on the box no pro
Just built new toaster box -
Here is the problem I am encountering when i attempt to send mail.
from smtpd log
CHKUSER rejected sender: from <[EMAIL PROTECTED]:[EMAIL PROTECTED]:>
remote rcpt <> : invalid sender MX domain
I am able to receive emails on the box no problem.
Thanks
Dennis
Please start a new thread!
Roman
Doug Smith napsal(a):
> Anyone tried jgreylist with qmail.
> http://qmail.jms1.net/scripts/jgreylist.shtml
> I'm getting really tired of all this spam!
> Thanx
>
Anyone tried jgreylist with qmail.
http://qmail.jms1.net/scripts/jgreylist.shtml
I'm getting really tired of all this spam!
Thanx
Please check the respective machine for any malware. If the smtp
authentication password is saved which in most cases is than a worm or
virus can collect the saved password and send spam using your server as
authorized relay.
That was my assumption when i first saw that you specified
IP_address_of
age-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 10, 2008 6:15 AM
To: toaster@shupp.org
Subject: [toaster] CHKUSER
I need a little help deciphering what's going on here.
CHKUSER accepted sender: from <[EMAIL PROTECTED]::>
remote
rcpt <> : send
mpiling. I'm
"squeamish" about doing that on a production server :)
Thank-you in advance,
Bill
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 10, 2008 6:15 AM
To: toaster@shupp.org
Subject: [toaster] CHKUSER
I need a little h
Sorry to be a pest but,
the IP address of origin is the correct
address of an allowed relay.
CHKUSER accepted sender: from
<[EMAIL PROTECTED]::> remote
DG93MCB1:unknown:IP_address_of_allowed_relay> rcpt <> : sender
accepted
I hate to say it but if the user was stating mail
from:legit_user but t
Thanks for the reply.
So, some one is just putting the mail
from:legit_user.. in their email, there isn't much I can do about that is
there? What I'm trying to get at is this is not an intrusion is it?
Thanks
Doug
> [EMAIL PROTECTED] ha scritto:
>> I need a little help deciphering what's going on
[EMAIL PROTECTED] ha scritto:
I need a little help deciphering what's going on here.
CHKUSER accepted sender: from <[EMAIL PROTECTED]::>
remote
rcpt <> : sender accepted
I'm getting a ton of these in my log files but the user CHKUSER is
reporting is not sending them. I tried commenting them
I need a little help deciphering what's going on here.
CHKUSER
accepted sender: from <[EMAIL PROTECTED]::>
remote
rcpt
<> : sender accepted
I'm getting a ton of these in my log
files but the user CHKUSER is reporting is not sending them. I tried
commenting them out of my tcp.smtp file and rese
On Aug 18, 2007, at 8:07 PM, Walt Gnann wrote:
Does chkuser support checking for users in /etc/passwd? I
installed Toaster v 0.9.2. chkuser works on virtual domains fine,
however, local addresses are accepted by chkuser regardless of
whether they're valid or not.
Correct. It does not c
Does chkuser support checking for users in /etc/passwd? I installed Toaster
v 0.9.2. chkuser works on virtual domains fine, however, local addresses
are accepted by chkuser regardless of whether they're valid or not.
At 17.07 21/03/2007, you wrote:
tonix (Antonio Nati) wrote:
>
> Version 2.0.9 of chkuser has been released (see
> http://www.interazioni.it/opensource/chkuser/download/).
>
> Short table of changes (more detailed changes in
> http://www.interazioni.it/opensource/chkuser/download/changelog.html)
>
tonix (Antonio Nati) wrote:
>
> Version 2.0.9 of chkuser has been released (see
> http://www.interazioni.it/opensource/chkuser/download/).
>
> Short table of changes (more detailed changes in
> http://www.interazioni.it/opensource/chkuser/download/changelog.html)
>
> * corrected some bugs on
Version 2.0.9 of chkuser has been released (see
http://www.interazioni.it/opensource/chkuser/download/).
Short table of changes (more detailed changes in
http://www.interazioni.it/opensource/chkuser/download/changelog.html)
* corrected some bugs on MySQL checking (problem was only with
so
On Tuesday 23 January 2007 03:56, David Earp wrote:
> Nitchi DaMon <[EMAIL PROTECTED]> wrote: >
> > Is there a way to have CHKUSER log the connections > that are
> denied for invalid users? > > The log for SMTP is the
> /var/log/qmail/smtpd/ > > but it contains a great deal
> of information. H
Nitchi DaMon <[EMAIL PROTECTED]> wrote: > >
Is there a way to have CHKUSER log the connections > that are denied
for invalid users? > > The log for SMTP is the
/var/log/qmail/smtpd/ > > but it contains a great deal of
information. Has > anyone created a patch or implemented MYsql
logging > wit
Is there a way to have CHKUSER log the connections
that are denied for invalid users?
The log for SMTP is the /var/log/qmail/smtpd/
but it contains a great deal of information. Has
anyone created a patch or implemented MYsql logging
with this?
tia
nitch.
_
At 03.41 17/01/2007, you wrote:
Sam Laffere wrote:
cat .qmail-default
| /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox
If no mailbox for addressee, bounce
#| /usr/local/bin/maildrop /home/vpopmail/domains/midkan.com/mailfilter
If no mailbox for addressee, send to mailfilter
#| /
Sam Laffere wrote:
cat .qmail-default
| /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox
If no mailbox for addressee, bounce
#| /usr/local/bin/maildrop /home/vpopmail/domains/midkan.com/mailfilter
If no mailbox for addressee, send to mailfilter
#| /home/vpopmail/bin/vdelivermail '
Sam Laffere wrote:
Problem is not fixed yet, but I just replaced the .qmail-default file,
and the midkan.com domain is now rejecting using CHKUSER. All I did
was edit the file back to :
cat .qmail-default
| /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox
#| /usr/local/bin/maildrop /home
Sam Laffere wrote:
Rick Macdougall wrote:
Sam Laffere wrote:
Sorry this is so long.
Problem: 7 domains do not have invalid users blocked by CHKUSER, 14
domains work correctly.
Details: Server set up with Shupp Toaster in early November 2006.
Only variance is using maildrop and mailfilte
Sam Laffere wrote:
Sam Laffere wrote:
Rick Macdougall wrote:
Sam Laffere wrote:
Sorry this is so long.
Problem: 7 domains do not have invalid users blocked by CHKUSER,
14 domains work correctly.
Details: Server set up with Shupp Toaster in early November 2006.
Only variance is using ma
Sam Laffere wrote:
Rick Macdougall wrote:
Sam Laffere wrote:
Sorry this is so long.
Problem: 7 domains do not have invalid users blocked by CHKUSER, 14
domains work correctly.
Details: Server set up with Shupp Toaster in early November 2006.
Only variance is using maildrop and mailfilte
Rick Macdougall wrote:
Sam Laffere wrote:
Sorry this is so long.
Problem: 7 domains do not have invalid users blocked by CHKUSER, 14
domains work correctly.
Details: Server set up with Shupp Toaster in early November 2006.
Only variance is using maildrop and mailfilter to sort spam into
Sam Laffere wrote:
Sorry this is so long.
Problem: 7 domains do not have invalid users blocked by CHKUSER, 14
domains work correctly.
Details: Server set up with Shupp Toaster in early November 2006.
Only variance is using maildrop and mailfilter to sort spam into
folders.
Summary: 21
Sorry this is so long.
Problem: 7 domains do not have invalid users blocked by CHKUSER, 14
domains work correctly.
Details: Server set up with Shupp Toaster in early November 2006.
Only variance is using maildrop and mailfilter to sort spam into
folders.
Summary: 21 domains were moved
Hi,
i found the problem - my old installation use as qmail-default
| /vpopmail/bin/vdelivermail '' delete
and not
| /vpopmail/bin/vdelivermail '' bounce-no-mailbox
so chkuser wasn't activated :-(
Jens Gassmann wrote:
Hi
i install my Mailserver after the toaster-documentation. But chkuser i
Jens Gassmann wrote:
> Hi
>
> i install my Mailserver after the toaster-documentation. But chkuser is
> patched but don't working, must i set any controlfile or uncomment
> define to activate the chkuser-patch?
Make sure your test is not from an ip with RELAYCLIENT set, or after
SMTP-AUTH has bee
Hi
i install my Mailserver after the toaster-documentation. But chkuser is
patched but don't working, must i set any controlfile or uncomment
define to activate the chkuser-patch?
regards,
Jens
--
» Website : http://www.atomix.de/
» Kontakt : [EMAIL PROTECTED]
» Telefon : 0179/136 10 16
> tonix (Antonio Nati) wrote:
>> At 05.14 09/02/2006, you wrote:
>>> Is there a way to close a connection after 3 or 4 invalid mailboxes
>>> are reached on a single connection? When spammers hit my production
>>> server I see multiple emails in the log account that if they could be
>>> blocked af
tonix (Antonio Nati) wrote:
At 05.14 09/02/2006, you wrote:
Is there a way to close a connection after 3 or 4 invalid mailboxes
are reached on a single connection? When spammers hit my production
server I see multiple emails in the log account that if they could be
blocked after 3 or 4 invali
At 05.14 09/02/2006, you wrote:
Is there a way to close a connection after 3 or 4 invalid mailboxes
are reached on a single connection? When spammers hit my production
server I see multiple emails in the log account that if they could
be blocked after 3 or 4 invalid address are reached.
It's
Is there a way to close a connection after 3 or 4 invalid mailboxes are
reached on a single connection? When spammers hit my production server
I see multiple emails in the log account that if they could be blocked
after 3 or 4 invalid address are reached.
Thanks
Dennis
I found my problem. I didnt set the CatchAll:Bounce in qmailadmin.
>>> [EMAIL PROTECTED] 9/9/2005 9:38 AM >>>
I have installed the toaster version 0.8 on a RHEL 3 AS Server.
The problem I am having deals with chkuser. It is accepting mail for any recipient.
I telnet to port 25 and do this:
I have installed the toaster version 0.8 on a RHEL 3 AS Server.
The problem I am having deals with chkuser. It is accepting mail for any recipient.
I telnet to port 25 and do this:
telnet localhost 25Trying 127.0.0.1...Connected to students (127.0.0.1).Escape character is '^]'.220 students.cs
That sounds interesting
Would you mind sharing you code changes to the rest of us please?
Kim
> Hi,
>
> I've installed Bill's toaster to Dual opteron, GENTOO linux, 64bit
> environment.
>
> Everything without problem (jut needed to change 2 lines of his code ;-)
>
> Roman
>
> Carlos J. Muentes n
Hi,
I've installed Bill's toaster to Dual opteron, GENTOO linux, 64bit
environment.
Everything without problem (jut needed to change 2 lines of his code ;-)
Roman
Carlos J. Muentes napsal(a):
Wow, I had the same exact problem with SLES9 64-bit edition, but
with courier-authlib! I did t
At 19.29 06/09/2005, you wrote:
Ok. I fixed the problem. I uninstalled the 64-bit version of Suse
Enterprise Linux 9 and installed the 32-bit version (the server is
running an AMD Opteron). I then went through the install process of
Bill's toaster and everything worked just fine. Chkuser wo
Tom Collins wrote:
On Sep 6, 2005, at 12:47 PM, Carlos J. Muentes wrote:
Wow, I had the same exact problem with SLES9 64-bit edition, but
with courier-authlib! I did the same thing, uninstalled the 64-bit
version, and installed the 32-bit vesion and all problems went away
just like tha
On Sep 6, 2005, at 12:47 PM, Carlos J. Muentes wrote:
Wow, I had the same exact problem with SLES9 64-bit edition, but
with courier-authlib! I did the same thing, uninstalled the 64-bit
version, and installed the 32-bit vesion and all problems went away
just like that. I found articles
Wow, I had the same exact problem with SLES9 64-bit edition, but
with courier-authlib! I did the same thing, uninstalled the 64-bit
version, and installed the 32-bit vesion and all problems went away just
like that. I found articles of others having the same issues with the
64-bit version
Ok. I fixed the problem. I uninstalled the 64-bit version of Suse
Enterprise Linux 9 and installed the 32-bit version (the server is
running an AMD Opteron). I then went through the install process of
Bill's toaster and everything worked just fine. Chkuser works now as it
should.
Can anyo
Hello Tonino,
I disabled chkuser and I was able to send email just fine to local users
through the secondary mail server.
It certainly appears as though there is something wrong with chkuser on the
secondary mail server. I may start over from scratch again since the
secondary server is not in
Hello Tonino,
Thank you for the reply.
Yes, I'm able to manually connect to the MySQL server from the secondary mail
server as the "vpopmail" user and run queries on the vpopmail.vpopmail table.
I'll disable chkuser and see if I am still unable to send email to local users
through the secondar
Are you sure MySQL is reachable from the second server?
Did you check if MySQL accounts work from the secondary server? MySQL has
a particular way to handle users, check it.
If problem persist, disable chkuser on secondary server and test if
problem still exists.
Tonino
> Adam Woodbeck wrote:
>
Adam Woodbeck wrote:
I'm experiencing the weirdest problem with a second mail server I just
set up. I've set up several toasters following Bill's instructions
and many FreeBSD toasters following Matt Simerson's instructions all
without any trouble. But the toaster I set up today is driving m
I'm experiencing the weirdest problem with a second mail server I just
set up. I've set up several toasters following Bill's instructions and
many FreeBSD toasters following Matt Simerson's instructions all without
any trouble. But the toaster I set up today is driving me nuts.
I'm setting u
> I believe this is a permission problem. You can try to do this:
> With root, run qmail-smtpd and you should get something like this:
>
>
> 220 ESMTP
> MAIL FROM:<[EMAIL PROTECTED]>
> 250 ok
> RCPT TO:<[EMAIL PROTECTED]>
> CHKUSER rejected rcpt: from <[EMAIL PROTECTED]::> remote <:unknown:unknown
o
read the vpopmail files, the chkuser result will always be permissive.
Kelvin Wu
-Original Message-
From: tonix (Antonio Nati) [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 27, 2005 11:09 PM
To: toaster@shupp.org
Subject: Re: [toaster] Chkuser problem??
Check all other chkuser #
Check all other chkuser #define and see their behaviour.
Then check if you have any VARIABLE that influences chkuser.
Last attempt, put chkuser debugging to work and see what happens.
(some doubts about previous question...
slx:~ # vuserinfo [EMAIL PROTECTED]
no such user [EMAIL PROTECTED]
Is
> Believe me when I say I am _far_ from understanding this stuff.
>
> Do you have a "Catch All" account enabled? Where did the message end up?
>
> Deion "Mule" Christopher
>
"Catch All" is bounced. The message is still in the queue.
Any suggestion? Thanks a lot.
Regards,
qing
> At 06.42 27/07/2005, you wrote:
>
> If chkuser is not enabled than it return a positive answer (found) to
> any query.
>
> Check if chkuser is enabled and check using qmailadmin if bouncing is
> enabled.
>
> Tonino
chkuser is enabled and I have checked qmailadmin, catchall is bounced. So
is the
Original Message Follows
From: [EMAIL PROTECTED]
Reply-To: toaster@shupp.org
To: toaster@shupp.org
Subject: [toaster] Chkuser problem??
Date: Wed, 27 Jul 2005 13:42:57 +0800 (HKT)
Dear all,
I found a strange problem in my server. Chkuser seems not work porperly.
Here is the informatio
At 06.42 27/07/2005, you wrote:
Dear all,
I found a strange problem in my server. Chkuser seems not work porperly.
Here is the information:
2005-07-27 13:07:31.616557500 CHKUSER accepted rcpt: from
<[EMAIL PROTECTED]:[EMAIL PROTECTED]:> remote
rcpt <[EMAIL PROTECTED]> : found
existing recipie
Dear all,
I found a strange problem in my server. Chkuser seems not work porperly.
Here is the information:
2005-07-27 13:07:31.616557500 CHKUSER accepted rcpt: from
<[EMAIL PROTECTED]:[EMAIL PROTECTED]:> remote
rcpt <[EMAIL PROTECTED]> : found
existing recipient
slx:~ # vuserinfo [EMAIL PROTE
Message-
> > From: Bob Hutchinson [mailto:[EMAIL PROTECTED]
> > Sent: Thursday, July 21, 2005 3:47 AM
> > To: toaster@shupp.org
> > Subject: [toaster] chkuser and tmda
> >
> > I have chkuser installed, as per Shupp toaster, but it
> > appears to b
There is a Qmail Ext setting in chkuser_settings.h.
Search the file for TMDA and you'll find it.
Charlie
> -Original Message-
> From: Bob Hutchinson [mailto:[EMAIL PROTECTED]
> Sent: Thursday, July 21, 2005 3:47 AM
> To: toaster@shupp.org
> Subject: [toast
I have chkuser installed, as per Shupp toaster, but it appears to be
preventing TMDA confirms from being delivered, is there anything I can do?
Here is the gist of the error message, edited to protect etc:
<[EMAIL PROTECTED]>:
1.2.3.4 does not like recipient.
Remote host said: 511 sorry, no mailb
Yes That is it! Thanks
By the way, which are other features or variables I could set in tcp.smtp?
Thanks
Helio
On Tuesday 12 July 2005 11:58, tonix (Antonio Nati) wrote:
> Yes, you have enabled anti intrusion features of chkuser, like maximum
> number of recipients or maximum number of wrong reci
Yes, you have enabled anti intrusion features of chkuser, like maximum
number of recipients or maximum number of wrong recipients.
When you reach one of these limits (it look you are hitting the max allowed
of recipients), you have such a message.
You should enable these features only for m
Hi
We have in our email server (standard qmail toaster last version). We sent a
communication to all our users ref Spam policy and got a few "Delivery Status
Notification Failure" with the following : Diagnosti-Code smtp;571 sorry,
you are violating our security policies (#5.7.1 - chkuser)
Th
David wrote:
Just a quick one - I noticed after upgrading to the 0.7.2 toaster (on RedHat
9), that I'm now getting CHKUSER lines in /var/log/qmail/current like so:
CHKUSER accepted rcpt: from <[EMAIL PROTECTED]::> remote
[EMAIL PROTECTED]:unknown:12.345.678.90 rcpt [EMAIL PROTECTED] : found existin
Just a quick one - I noticed after upgrading to the 0.7.2 toaster (on RedHat
9), that I'm now getting CHKUSER lines in /var/log/qmail/current like so:
CHKUSER accepted rcpt: from <[EMAIL PROTECTED]::> remote
[EMAIL PROTECTED]:unknown:12.345.678.90 rcpt [EMAIL PROTECTED] : found existing
recipient
I recently "upgraded" from a standard LWQ installation to the Qmail
Toaster setup, more or less. Here are the significant pieces I put
together:
-- fresh netqmail 1.05, patched with qmail-toaster-0.7b3.patch and
chkuser-0.7b2.mysql.patch (after upgrading vpopmail)
-- vpopmail 5.4.6 with mysql s
using recordio in the qmail-smtpd/run file startup script as well.
cheers
Shane
>-Original Message-
>From: Jeff Koch [mailto:[EMAIL PROTECTED]
>Sent: Monday, 26 July 2004 9:47 PM
>To: [EMAIL PROTECTED]
>Subject: RE: [toaster] chkuser patch - logging
>
>
>Hi Shane:
ne
>-Original Message-
>From: Jeff Koch [mailto:[EMAIL PROTECTED]
>Sent: Monday, 26 July 2004 9:14 PM
>To: [EMAIL PROTECTED]
>Subject: Re: [toaster] chkuser patch - logging
>
>Hi David:
>
>Thanks but is there something I need to turn on. We have the
>chkuser patc
I didn't realize before. Yes, probably I have that information because
I'm using recordio inside the qmail-smtpd run script.
Here's an excerpt of qmail-smtpd run:
/usr/bin/recordio /usr/local/bin/rblsmtpd -b -r sbl.spamhaus.org -r
relays.ordb.org \
/usr/bin/relay-ctrl-check /var/qmail/bin/qmail
\
'-* * > *' '-* * < *' '+* * < HELO *' '+* * < MAIL *' '+* * < RCPT *' '+* *
> 5*' '+* * > 4*' /var/log/qmail/smtpd
Regards
Shane
>-Original Message-
>From: Jeff Koch [mailto:[EMAIL PROTE
Hi David:
Thanks but is there something I need to turn on. We have the chkuser patch
working on three mailservers ( I know because of the rejection replies to
test messages) but there are no entries in the /var/log/qmail/smtpd logs.
At 02:49 AM 7/26/2004, you wrote:
Yes, you will find in the smt
Yes, you will find in the smtpd log file lines like this:
550 sorry, no mailbox here by that name (#5.1.1 - chkusr)
On Mon, 2004-07-26 at 07:04, Jeff Koch wrote:
> Hi:
>
> Does anyone know if there is any logging of connections rejected by the
> chkuser patch?
>
>
> Best Regards,
>
> Jeff Ko
Hi:
Does anyone know if there is any logging of connections rejected by the
chkuser patch?
Best Regards,
Jeff Koch, Intersessions
Lars E. D. Jensen wrote:
If you have a catch all then the chkusr patch will pass all mail to the
domain as its going to a valid mailbox. You will need to use
bounce-no-mailbox to reject the mail.
Shane
Ahhh, thanks Shane :)
You can still use the chkusr patch with the catchall account.
Edit in th
If you have a catch all then the chkusr patch will pass all mail to the
domain as its going to a valid mailbox. You will need to use
bounce-no-mailbox to reject the mail.
Shane
Ahhh, thanks Shane :)
--
Med venlig hilsen / Best regards
Lars E. D. Jensen
[EMAIL PROTECTED]
>Hi all
>
>I've compiled and build a debian deb package with the Qmail chkuser
>patch mysql version and Large Qmail Patch for Netqmail.
>
>The chkuser patch works in my local environment with the deb package
>installed together with vpopmail, but when I try to install it on
>another server it se
Hi all
I've compiled and build a debian deb package with the Qmail chkuser
patch mysql version and Large Qmail Patch for Netqmail.
The chkuser patch works in my local environment with the deb package
installed together with vpopmail, but when I try to install it on
another server it seems that
Mario Viana wrote:
I want to user chkuser-mysql in my SMTP-MX-ANTIVIR to deny incoming SMTP for
unknown virtual domain users before forwarding message to antivirus and pop
server to reduce antivirus working. I have replicated my vpopmail database
from POP server to SMTP server yet, and create a
Hello people,
I have two server for a big domain. One of them is a SMTP-MX-ANTIVIRUS it
receive all incoming and outgoiing mail, check for virus and forward messages
to another machine (by a smtproute), a POP server which I use
netqmail+qmail-toaster+vpopmail 5.4.2+Mysql and users' hom
Is it support to reject unknow user like chkuser patch?
- Original Message -
From: "Jeronimo Zucco" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 10, 2004 6:07 PM
Subject: Re: [toaster] chkuser patch ldap
Use qmail-ldap:
http://www.nrg4u.com
--
Use qmail-ldap:
http://www.nrg4u.com
--
Jeronimo Zucco
[EMAIL PROTECTED]
PGP Public Key: www.riscozero.inf.br/pgp/jczucco.pgp
---
Risco Zero - Suporte, Conectividade e Segurança da Informação Ltda.
Av. Julio de Castilhos, 81
Hi,
Is there any
chkuser patch for ldap backend of vpopmail
?Regards,Jimmy.
On Thu, 2004-04-22 at 17:11, Jeff Koch wrote:
> Your .qmail-default does not look like a standard toaster install to me.
> The plain jane toaster with chkuser-mysql support should say:
>
> | /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox
>
No, I followed the install but obviously changed
Your .qmail-default does not look like a standard toaster install to me.
The plain jane toaster with chkuser-mysql support should say:
| /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox
At 09:59 AM 4/22/2004, you wrote:
On Thu, 2004-04-22 at 14:53, Jeff Koch wrote:
> We use the patch with
On Thu, 2004-04-22 at 14:53, Jeff Koch wrote:
> We use the patch with mysql and it works fine. Make sure that you have
> vpopmail compiled with mysql-auth support. chkuser is a patch to qmail so
> that it rejects the smtp connection if the email address does not have a
> valid user name.
Yes, v
We use the patch with mysql and it works fine. Make sure that you have
vpopmail compiled with mysql-auth support. chkuser is a patch to qmail so
that it rejects the smtp connection if the email address does not have a
valid user name.
At 03:38 AM 4/22/2004, you wrote:
Hi all,
I've just upgraded
Hi all,
I've just upgraded (again) my qmail installation, in an attempt to cut
out spam trying random email addresses to my domains, using
chkuser-0.6.mysql.patch.
I've followed the whole instalation procedure, compiled successfully
qmail with the patches.
The problem I found is, when using inside
Hello Eero,
Tuesday, February 24, 2004, 3:10:42 PM, you wrote:
>> I've installed qmail several times before, but this time with chkuser,
>> and I'm getting problems with forwards and aliases :
>>
>> <[EMAIL PROTECTED]>: host mail.projure.no[64.246.44.44] said: 533 sorry,
>> your envelope rec
Stig Martin Fiskaa wrote:
Hello people,
I've installed qmail several times before, but this time with chkuser,
and I'm getting problems with forwards and aliases :
<[EMAIL PROTECTED]>: host mail.projure.no[64.246.44.44] said: 533 sorry,
your envelope recipient has been denied (#5.7.1) (in rep
Hello people,
I've installed qmail several times before, but this time with chkuser,
and I'm getting problems with forwards and aliases :
<[EMAIL PROTECTED]>: host mail.projure.no[64.246.44.44] said: 533 sorry,
your envelope recipient has been denied (#5.7.1) (in reply to RCPT TO
command)
On Nov 3, 2003, at 6:22 PM, John Johnson wrote:
This is from the website the patch came from.. I am not shure how I
would
add this to make the chkuser patch work
any help please ?
You need to add those lines to qmail-smtpd.c, but not the "+" signs at
the begging. I put together a new chkuser p
1 - 100 of 111 matches
Mail list logo
