Re: [RE-wrenches] On Demand Heaters for SDHW

trigger the unit to fire-up, wasting 100,000 btu's of fuel for a minute or so. Wayne Irwin Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352 336

Re: [RE-wrenches] On Demand Heaters for SDHW

rederic, WI 54837 715-653-4295 sol...@legacysolar.com www.legacysolar.com -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Wayne Irwin Sent: Friday, September 17, 2010 9:40 AM To: Wrenches Subject:

[RE-wrenches] One large inverter vs Several small invetrers?

wer surges/lightning strikes. Any input regarding lightning and transformer-less inverters would also be greatly appreciated? Thanks, Wayne Irwin Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.c

Re: [RE-wrenches] One large inverter vs Several small inveters?

wer surges/lightning strikes. Any input regarding lightning and transformer-less inverters would also be greatly appreciated? Thanks, Wayne Irwin Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.c

Re: [RE-wrenches] outback mate question

Jay, I have seen the same problem and like Kent, I also reset the Mate to factory defaults and reprogrammed all the AGS settings for the customer. Also no problems since. I would also recommend sending in the the mate for a free software up grade. Wayne Irwin Director of Engineering Pure

[RE-wrenches] 24 volt Battery Bank comparison

Hello Esteemed Battery Gurus, Which of the following do you believe is the better 24 V battery bank? A) 13 - Rolls 2-YS-31 2430 AH @ 20 HR (one string) or B) 9 - Rolls 8-CS-25P 820 AH @ 20 HR (3 strings of 3) Thank you in advance for your input! Wayne Irwin, EE Director of Engineering

Re: [RE-wrenches] 24 volt Battery Bank comparison

Hello all. I am indeed thinking of 13 - 2 volt batteries to make up a 26 volt battery bank for the 24 volt system. Thoughts for or against are welcome. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa

Re: [RE-wrenches] 24 volt Battery Bank comparison

Just for a little extra. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352 336-3299 Fax 352 316-1637 Cell The content of this

Re: [RE-wrenches] 24 volt Battery Bank comparison

hand, Tom presents the exact reason behind the idea of the 3 - string design. This is an off grid system. I know this may open up a can of (philosophically varied) worms. But, this is the reasoning behind the two designs. PS. Buss bars (if 3 strings) and 4/0 CU would be used. Wayne Irwin, EE

Re: [RE-wrenches] 24 volt Battery Bank comparison

No DC loads at all. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352 336-3299 Fax 352 316-1637 Cell The content of this message

Re: [RE-wrenches] 24 volt Battery Bank comparison

I think the verdict is 12 - Rolls 2-YS-31 2430 AH @ 20 HR (one string) and one dry spare in storage is the best case scenario! Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http

Re: [RE-wrenches] Tariff

FYI - According to the IRS you cannot purchase inventory to "hide" your profits unless you have supporting contracts. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySola

[RE-wrenches] Adding generators to PV systems

d the introduction of inverter generators, I'm concerned that if the inverters feed back to the generator it will smoke the stator. I'm wondering if any of you have any experience/issues? If so, what solutions or recommendations do you have? Thanks, Wayne Irwin, President License

Re: [RE-wrenches] Adding generators to PV systems

line side tap. Most generator companies have no clue about how solar works and so we're doing some educating (or at least attempting) and research of our own. Thanks for all of your input! Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar Interna

Re: [RE-wrenches] has anyone ever had this happen?

We do international shipping fairly often and always require prepayment. It can be difficult to do international wire transfers so we offer PayPal as an option and add on the "convenience fee". Don't ship without payment you have no way to get it back once it's gone. Wa

Re: [RE-wrenches] Enphase IQ series inverters

We've been using them for about a year now. So far no failures which is quite remarkable considering the fairly large number that we've installed. We're keeping our fingers crossed! Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar Intern

Re: [RE-wrenches] Enphase IQ series inverters

sible, use the wps option to gain web access so that when your customer changes their WiFi password the Envoy is not locked out causing you to make another trip. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com

[RE-wrenches] SMA Sunny Boy Display Window

We have installed quite a few SB's over the years and are seeing a growing number of fogged over display lenses. We've tried headlight polish with limited success. Other than purchasing a new lid from SMA does anyone have another solution to restoring or replacing the window? W

Re: [RE-wrenches] SMA Sunny Boy Display Window

That's pretty fancy. Thanks for the tips on the custom cut glass. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352 336-329

Re: [RE-wrenches] Solar set backs

Calfire code seems to be the standard being somewhat enforced as the standard nationwide. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377

Re: [RE-wrenches] Any thoughts on this approach to adding battery backup to an existing grid tie system will be appreciated.

come up with a regulated AC coupled charge versus an all or nothing approach via phase shifting or relay controlled. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com

Re: [RE-wrenches] Mate 3 shutdown

Try a firmware update if you have not already. From: RE-wrenches on behalf of Dana Sent: Wednesday, October 10, 2018 7:51:37 PM To: 'RE-wrenches' Subject: [RE-wrenches] Mate 3 shutdown My learned fellow Sparkies, I have at home off-grid Radian with Mate 3 mo

Re: [RE-wrenches] Portable Power Centers

Try solarchargingstation.com From: RE-wrenches on behalf of Peter Parrish Sent: Saturday, December 8, 2018 6:27:15 PM To: RE-wrenches Subject: [RE-wrenches] Portable Power Centers We are working with Turning Point Foundation a 501(c)3 to provide off-grid power

[RE-wrenches] Bi-Facial or transparent modules

Does anyone have a source for bi-facial or double glass modules with frames? Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352

Re: [RE-wrenches] Enphase Envoy in PVC J-Box

If you locate the envoy in a metal enclosure the WiFi connection will most likely not work. From: RE-wrenches on behalf of Christopher Warfel Sent: Thursday, March 28, 2019 2:43:04 PM To: re-wrenches@lists.re-wrenches.org Subject: Re: [RE-wrenches] Enphase Envoy

Re: [RE-wrenches] Outback VFX 3648 tech support and parts

Outback still repairs heritage gear. From: RE-wrenches on behalf of Greg Sent: Saturday, April 13, 2019 1:45:47 PM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Outback VFX 3648 tech support and parts Friends, I have a customer who's ready to upgr

[RE-wrenches] Damaged in shipping and Outback issues

ponse. Unfortunately if their policy remains unchanged we will no longer be offering OB products. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 O

Re: [RE-wrenches] Off Grid Washing Machine

I also agree with Jerry's comments. I've been installing and living off grid for over 12 years and have ALWAYS used conventional appliances (while being mindful of consumption) with no issues including pumps and mini-split AC's. Wayne Irwin President License #CVC56695 State

Re: [RE-wrenches] Extending Enphase WiFi Range

We've used a variety of directional wifi extenders with external antenna and have had a 100% success rate. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com

Re: [RE-wrenches] Old & new Enphase communication issues

The IQ series is not compatible with non IQ versions and would need to treated as two separate systems with two Envoys. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<h

[RE-wrenches] Battery Watering Systems

Has anyone found a reliable battery watering system? Wayne Irwin, President Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.net http://pureenergysolar.net 352 377-6527 Office Date: Mon, 4 May 2009 20:42:03 -0700 To: re

Re: [RE-wrenches] plug in gridtied inverter

I bought the "Plug-In Inverter" and the "Hydrogen Generator" and now that my house is on fire and my car exploded I can say that I gave my all to going green! Wayne Irwin, President Pure Energy Solar International Inc. State Licensed Solar Contractor Lic

Re: [RE-wrenches] SHW Text books?? Tom Lane's "Lessons Learned" Book

Hey Tom, What do you think of your Book? :-) Wayne Irwin, President Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352 336-3299 Fax 352 316-1637 Cell The content of this

Re: [RE-wrenches] PV Powered vs SMA

out one SMA inverter (yet). As far as SMA's Web Box and monitoring...well it's not the most impressive but once you buy the chip and box the service is free and it works pretty well. I hope this helps. Wayne Irwin EE Pure Energy Solar International Inc. State Licensed Solar Contracto

Re: [RE-wrenches] Other's thoughts on Autonomy? Maybe I'm Just Lucky?

ce in their home. We tell our customers "When its cloudy cut back on your energy consumption or else your system will shut down before killing your batteries". Just my $.02 Wayne Irwin EE Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa..

Re: [RE-wrenches] SMA GFDI Err Tip was PV Powered vs SMA

We have had the same issue with the SMA GFDI err. To fix the problem, before commissioning we remove the fuse, squeeze the GFDI fuse holder a little tighter and clean the contact ends of the fuse. Fires right up. Wayne Irwin EE Pure Energy Solar International Inc. State Licensed Solar

Re: [RE-wrenches] Outback Mate remote programming

Kirk, We usually walk the customer through the programming steps with them on the phone while were both at our mates. This has proven to be the most successful way for them to learn, and it saves us a trip (make sure mate software versions are the same or similar). Wayne Irwin EE Pure

Re: [RE-wrenches] sales commissions

I have to agree with Keith. Our experience is that good sales people are a valuable asset that are hard to find and harder to keep (especially during slow times). So, we try to keep them happy! Wayne Irwin EE, DOE Pure Energy Solar International Inc. State Licensed Solar Contractor

[RE-wrenches] Portable Solar Trailer w/ intermittent Ground Fault

ommendations do you have from personal experience? Thanks! Wayne Irwin Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352 336-3299 Fax The conten

Re: [RE-wrenches] Mitsubishi Mini Split fighting with Outback VFX Off Grid

We have VFX systems using Fujitsu and Gree mini-splits with no issues. FYI - All systems have X240's for balancing. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com

Re: [RE-wrenches] Mitsubishi Mini Split fighting with Outback VFX Off Grid

nto the cost of installing a Gree since they are the least expensive. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352 33

[RE-wrenches] Service Panel Bus Rating

panel, where might I find this? I have looked at Schnider but have not been able to find anything specific. Thanks, Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http

Re: [RE-wrenches] Acid containment

Shower pan liner would probably work very well. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352 336-3299 Fax The Sun

Re: [RE-wrenches] Manufacturers warranty......

Same story with OB. We just have to eat it. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352 336-3299 Fax The Sun Is

[RE-wrenches] Lightning Strike Fries Array

are Schuco 230's. Obviously not covered by warranty and Schuco has pretty much bailed out of the US market. Does anyone have experience repairing these modules? Any similar experience and/or advice would be appreciated. Wayne Irwin, President License #CVC56695 State Licensed Solar Contr

Re: [RE-wrenches] to flash or not to flash

http://www.usshingle.com/wp-content/uploads/2013/08/US-Shingle-Roof-Tune-Up.png Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527

[RE-wrenches] Between module gasket system

We have a customer with a ground mount system that would like to seal the 1" gap (UniRac) between the modules so that he can have a dry space underneath the array. Any product recommendations or DIY suggestions? Thanks, Wayne Irwin, President License #CVC56695 State Licensed Solar Contr

Re: [RE-wrenches] Sanyo NOW Panasonic warranty claim-Where to start?

john.scal...@us.panasonic.com Good Luck! Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352 336-3299 Fax The Sun Is

Re: [RE-wrenches] Drop mode: who needs it?

kers don't auto reset. Can also be useful for exercising batteries with GT system. Wayne Irwin P.E.S. Sent from my mobile device From: st...@surrette.com To: re-wrenches@lists.re-wrenches.org Date: Fri, 5 Feb 2016 19:39:34 + Subject: Re: [RE-wrenches] Drop mode: who needs it?

Re: [RE-wrenches] small inverters

ccess with reliability and performance. Yes they are still being manufactured under the Xantrex name. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 35

Re: [RE-wrenches] Enphase without internet

We have included an analog meter to help provide some data in similar situations. This seems to make the customer happy, especially when they see the "solar meter" spinning. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International

Re: [RE-wrenches] Enphase Support Non-Responsive

Maybe just dumb luck, but we almost always have quick phone tech support from Enphase and always get reimbursed. Wayne Irwin Pure Energy Solar Sent from my mobile device From: conr...@cape.com Date: Fri, 5 Aug 2016 12:39:02 -0400 To: re-wrenches@lists.re-wrenches.org Subject: Re: [RE

Re: [RE-wrenches] Enphase Phone Service

That's the number we use. You have to have your ID number and the site ID number as well. We've had fairly quick responses last couple of times. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenerg

Re: [RE-wrenches] MATE3 restart

Probably needs the firmware update. In the meantime I would suggest unplugging the ethernet cable and plugging it back in that might help. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http

Re: [RE-wrenches] Firmware, Firmware, Firmaware was Outback Programming Ghost

attempts to re-upgrade the inverter firmware, we took a shot at upgrading the Mate 3 firmware which did work. We then again tried the inverters and it worked. System is now working again (for now) and the programming is all still valid. Wayne Irwin, President License #CVC56695 State Licensed

Re: [RE-wrenches] Firmware, Firmware, Firmaware was Outback Programming Ghost

glitches are remedied soon. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http://SolarChargingStation.net 352 377-6527 Office 352 336-3299 Fax The Sun Is Always Shining! The c

[RE-wrenches] Morningstar Sure Sine On/Off switch

Does anyone have a source or a solution for a NC (normally closed) button that could be used for the Morningstar inverters? Other than cheap plastic ones, all that we can seem to find are NO. Thanks, Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar

Re: [RE-wrenches] Off Grid Refrigeration

I agree with Jerry. Off the shelf makes life simple. Also make sure to convince them to go with gas oven and dryer. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com http

Re: [RE-wrenches] Array Mock-up Software

We still use sketch-up. But we are also struggling with the poor imagery and having to pull images from other sources. We are looking for alternatives to sketch up unless they renew their contract with Google Earth. Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor

Re: [RE-wrenches] Off grid in Florida

I live off grid in Florida, fully permitted with no issues. We've done off-grid systems for typical 3000 sq' homes with AC, pools, etc... The whole "illegal to live off-grid in FL" is total BS. What happens if you don't pay your utility bill? They disconnect yo

Re: [RE-wrenches] System Performance | Battery Based Grid Tie

We have found that most of our batt systems are running at around 85% sell back. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352

Re: [RE-wrenches] System Performance | Battery Based Grid Tie

85% STC. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.com http://pureenergysolar.com 352 377-6527 Office 352 336-3299 Fax 352 316-1637 Cell The content of this message is Pure

Re: [RE-wrenches] Suniva modules

Marco, We have been using Suniva for several years now and have been satisfied with their performance and craftsmanship. Its my understanding that only some of the module models are 100% US Made. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed

Re: [RE-wrenches] Sanyo/Panasonic HiP

As I understand it, the reason was... by removing the flanges on the frame it made the module slightly smaller and therefore increased its efficiency rating. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa

Re: [RE-wrenches] Sanyo HIP-200BA3 defect

Yes we have had the exact problem. Sanyo/Pnansonic has refused to replace the module which clearly has a problem. Sanyo/Panasonic is not an honorable company. Wayne Irwin, EE Director of Engineering Pure Energy Solar International Inc. State Licensed Solar Contractor License # CVC56695 wa

[RE-wrenches] 24V Rolls Charging Parameters?

ls tech support . James? Thanks in advance for your help, Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.com 352 377-6527 Office 352 336-3299 Fax The content of this message

Re: [RE-wrenches] 24V Rolls Charging Parameters?

flawlessly for past 6 yrs. . Supports a 3500sq' Res/Farm with 1hp well pump for irrigation, AC throughout home, pool, etc... Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com http://PureEnergySolar.c

Re: [RE-wrenches] 24V Rolls Charging Parameters?

ficiency and provide redundancy. System seems to have worked flawlessly for past 6 yrs. . Supports a 3500sq' Res/Farm with 1hp well pump for irrigation, AC throughout home, pool, etc... Wayne Irwin, President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc.

[RE-wrenches] Line Side Feed In and Disconnects

y the National Electrical Code or just an interpretation? Your thoughts? Wayne Irwin, President Pure Energy Solar International Inc. Lic # CVC56695 Date: Mon, 9 Mar 2009 18:20:57 -0400 From: reelli...@gmail.com To: re-wrenches@lists.re-wrenches.org Subject: Re: [RE-wrenches] Small Torque Wren

Re: [RE-wrenches] Line Side Feed In and Disconnects

ect inside next to the distribution panel, or install an additional disco outside between the house panel and the utility meter, next to the inveter, AC disconnect and FIT meter. Wayne Irwin, President Pure Energy Solar International Inc. Lic # CVC56695 wa...@pureenergysolar.

Re: [RE-wrenches] Line Side Feed In and Disconnects

Yeah, Welcome to the World of the Feed In Tariff! Oh Well! At least we have business. Wayne Irwin, President Pure Energy Solar International Inc. Lic # CVC56695 wa...@pureenergysolar.net http://pureenergysolar.net 352 377-6527 Office 352 336-3299 Fax 352 316-1637 Cell From: sjohn

Re: [RE-wrenches] Utility Side Feed In and Disconnects (was "Line Side")

now how it goes. Thanks Again. Wayne Irwin, President Pure Energy Solar International Inc. Lic # CVC56695 wa...@pureenergysolar.net http://pureenergysolar.net From: gilliga...@gmail.com To: re-wrenches@lists.re-wrenches.org Date: Sun, 15 Mar 2009 10:13:29 -0700 Subject: Re: [RE-wrenches] Ut

Re: [RE-wrenches] Sunny Beam w/Bluetooth

I spoke with SMA today and was told "Late Summer". Wayne Irwin, President Pure Energy Solar International Inc. Florida Solar Energy Center Certified State Licensed Solar Contractor License # CVC56695 wa...@pureenergysolar.net http://pureenergysolar.net 352 377-6527 Office 35

Re: [RE-wrenches] Cleaning Modules

I did a little case study on an array (10kw Sanyo) in which the upper half was washed with softened water only, and the lower half was/is washed with softened water and rainx solution. The results of over a 12 year period have been zero difference in output between the two halves, but the upper

[RE-wrenches] Outback_Inverter firmware mismatch

strating to the system owners as well as costly and time consuming for us. Any guidance in resolving this issue would be greatly appreciated. All these systems have been assembled by Outback. None of them have OpticsRE. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pu

Re: [RE-wrenches] Outback_Inverter firmware mismatch

All our systems except for 2 are GT. We've also swapped cables, mates, hubs etc...to no avail. On the other hand, the systems that we installed decades ago with GVFX3648's are still operating without a glitch. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor P

Re: [RE-wrenches] Outback_Inverter firmware mismatch

this works, they will try something similar for the Mate 3. So, in the meantime keep on unplugging and replugging. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureen

Re: [RE-wrenches] Adios Solar Pathfinder

window is. It seems a bit pricey at first, but it has definitely paid for itself. I highly recommend getting the GPS and the hard case. Wayne Irwin, President Pure Energy Solar International Inc. Lic # CVC56695 wa...@pureenergysolar.net http://pureenergysolar.net 352 377-6527 Office 352 336

[RE-wrenches] Outback with a 48V Lithium battery

Any experience/input on the Outback with Lithium subject would be greatly appreciated. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureenergysolar.com/>

Re: [RE-wrenches] New Outback FXR Series as GTGBB on existing Off Grid Home

etting and have the generator power an external charger to boost the batteries. I think the brand we used to use was IOTA however, I have also seen golf cart chargers used. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenerg

Re: [RE-wrenches] Enphase Batteries and IQ7+ Won't Restart

I am not aware of any access to the DC side of the battery and Enphase did not offer this as an option. We did briefly discuss their future product line (10c) with built in array and load isolation. We'll see. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure E

Re: [RE-wrenches] Enphase Batteries and IQ7+ Won't Restart

Typically Rolls 8-CS-25P or S6-L16 Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureenergysolar.com/> SolarChargingStation.com<http://solarchargingstation.com/> 352 377

[RE-wrenches] Enphase Batteries and IQ7+ Won't Restart

our Outback systems were issue free. I hope this helps some of you. Good Luck out there! Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureenergysolar.com/> SolarChargingSt

Re: [RE-wrenches] Enphase Batteries and IQ7+ Won't Restart

one from Enphase want to chime in here? Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureenergysolar.com/> SolarChargingStation.com<http://solarchargingstation.com/> 352

[RE-wrenches] Outback Company status

ining to answer calls. The have moved the service center and manufacturing to Texas and are training the employees at the new location. But the company is still very much around but have a way to go before they are where they once were. And that's the new from Lake Woebegone. Wayne Irwin

Re: [RE-wrenches] Outback Company status

Same old number should work. I wouldn't expect anyone to answer though. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureenergysolar.com/> SolarChargingStati

Re: [RE-wrenches] mini splits

That said, they do work well with solar applications. Wayne Irwin President License #CVC56695 State Licensed Solar Contractor Pure Energy Solar International Inc. wa...@pureenergysolar.com PureEnergySolar.com<http://pureenergysolar.com/> SolarChargingStation.com<http://solarchargingstation

Re: [RE-wrenches] mini splits

e with no issues. If possible, find someone to show you once. YouTube will offer many WRONG ways to do it videos. I don't use the vacuum on the lines. I just keep the lines plugged and dry until I hook them up. My 15kW array with 2 - VFX3648R's has had no issue powering any of the