Re: [RE-wrenches] Another Mate 3 programming issues

Ok, this sounds like what I have, so probably that's not going to change and just have to live with it. All said and done, I've installed maybe 20 Outbacks out here, and very very few issues over many years. On 7/19/2024 12:59 PM, Chris Schaefer wrote: Not sure if this helps but I had insta

Re: [RE-wrenches] Another Mate 3 programming issues

I saw the NA and was?  This has been a problem since I took over the system.  I was hired to maintain as the owner is a retired ship mechanic and is very risk adverse. So, in any case, this was how it looked at least two years ago, when I started working for him. There is an active light on th

Re: [RE-wrenches] Another Mate 3 programming issues

MX60 was not networked which was the reason I stopped using them and went to Xantrex around 2005. Not surprised that you could not change MX60 settings on mate. Long time ago... Dave Angelini Offgrid Solar "we go where powerlines don't" [2]https://offgridsolar1.com/ [3] [2] e-mail offgrid

Re: [RE-wrenches] Another Mate 3 programming issues

Not sure if this helps but I had installed a full blown Outback twin VFX 3648 with two MX60's with the old green cabinets back in 2005. Last year I had to replace the two inverters with the new FXR as the VFX is discontinued. In order to do this I had to dump the old oval mate and move up to the M

Re: [RE-wrenches] Another Mate 3 programming issues

HI Chris, Can you give us more data? Like is this a new problem, or it only started after X? Since its not seeing the port ( NA) it could be the CC or the HUB, or the cable. the hub will show an active LED light if its connecting to anything on that port. You can try plugging into the CC di

Re: [RE-wrenches] Another Mate 3 programming issues

Some of the older FM60s and even FM80s won't work with the Mate3. If I remember correctly, this was due to the older 8-bit processors on some pre-2008 units. MX60s have never and won't ever work with the MATE3.