other one that mounts to
> the canti bosses. The bike was built for 26" wheels, btw.
>
> -Norman in PDX
>
>
> From: dougP
> To: RBW Owners Bunch
> Sent: Wednesday, November 9, 2011 12:38 PM
> Subject: [RBW] Re: Nitto Mini Rac
The little Nitto on my Atlantis is 155 mm. Steel is highly malleable;
the bend option should work. You just ID'd the downside to braze-
ons. I had braze-ons added for my low riders, then changed to a
better rack without thinking to compare mounting points.
dougP
On Nov 9, 10:45 am, William wr
Yeah, you and I are talking about the same rack. Good theory.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/rbw-owners-bunch/-/1O6UtRXCqMkJ.
To post to this group
William,
I'm thinking of the one here, http://www.rivbike.com/product-p/r5.htm
the reason i suspect is that in this video, you can see mark use
clamps because the bosses are a little too high. i have an older
campee front with the same slots, i am able to use the bosses on my
hillborne, but the
Minh
By 'campee full size' do you mean this one?
[image: Nitto Campee Front Rack - Rev 1 - Click Image to Close]
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/rbw-
If you want to tinker (and want to avoid clamps), you could use
slotted bracket from the hardware store as an extension. I think the
mounts on your fork are more suited for the campee front full size
rack.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners
I measured on my Bombadil. My Nitto Mini went right on, and the distance
does seem closer to the 150mm you are getting from your rack. I have a
second Nitto Mini that I had run on my Hillborne. That also went right on
with no special effort. When I can find that rack I'll measure that, too,
Hard to tell from the photo, but it looks like you might be able to
straighten the support struts and it would reach.
FWIW I have bent/straightened/re-bent a Nitto rack in the past to
conform/fit to various bikes, with no issues.
-Matt
--
You received this message because you are subs
