[RBW] WTB: shorter extension 25.4 90-190/faceplater stem

Hey y'all. I'll try make this my last ask for a bit! Looking for a 60 or 85mm extension 90-190 or similar 4-bolt faceplater stem. More interested in the 90-190 as I don't need much rise. Not trying to use a quill adapter and threadless stem. Thanks! - Teague in Boise -- You received this mes

[RBW] Re: New S!LVER hub questions: free hub removal, parts availability

wrote: > The freehub-side end cap is likely tighter than the non-drive end cap, and > when removing it, the small o-ring that creates a seal might be damaged. If > that happens, contact Rivendell -- we have replacement o-rings. > > On Friday, January 10, 2025 at 1:25:19 PM UTC-8 Te

[RBW] Re: Charlie Gallup tire & fender dilemma

I don't have a Gallop, so I can only help so much! I do run Snoqualmies with 52mm VO Zeppelin fenders and they're a match made in heaven. Could one run the Zeppelin fenders under caliper brakes? Can't say myself. Do you have 52+mm between your squeezed brakes? Could one riding Snoqs with fender

Re: [RBW] Winter Photos 2024/2025

Steffen - really digging that Susie shot! Looks chilly and bleak! On Tuesday, January 14, 2025 at 7:32:21 PM UTC-7 Keith P. wrote: > That photo rules. 👌 > > So great. > k. > > On Jan 14, 2025, at 3:33 PM, Steffen wrote: > >  > > > > -- > You received this message because you are subscribed to

[RBW] Re: New S!LVER hub questions: free hub removal, parts availability

product page and the words > for the replacement 130mm end cap make it seem that you just pull em off. > If in doubt call Riv > > BL in EC > > On Friday, January 10, 2025 at 11:32:29 AM UTC-8 Teague Scott wrote: > >> Seems this most recent iteration did away with the

[RBW] Re: New S!LVER hub questions: free hub removal, parts availability

hub > body off, exposing the pawls on the free hub body and the drive ring on the > hub shell. You can lube up the drive ring with heavier oil or light grease > to quiet things down. > > BL in EC > On Friday, January 10, 2025 at 11:01:35 AM UTC-8 Teague Scott wrote: >

[RBW] Re: What's the new model going to be in 2025?

D. BYU has commissioned Riv to design a new model to send missionaries out on. I have a cousin that went there on a rugby scholarship and that's what the big Y reminds me of. OR D. Wishbone seatstays or chainstay yoke (both?) are in the mix. On Friday, January 10, 2025 at 11:57:58 AM UTC-7 A. Wal

[RBW] New S!LVER hub questions: free hub removal, parts availability

Hey y'all. Just received a New S!LVER hub after much debating about what to use in a rear wheel build for my Susie and have a couple questions. In the past I've built up a couple wheelsets with good ol' Shimano cup 'n cone hubs -- M900 and M756. I used to be a regular at my local coop and would

[RBW] Re: Susie Longbolts

Discontinued. The last batch of Susies was sold off this past summer. I did note mention of a new model later this year in one of the recent newsletters. Perhaps this'll be the one to replace the Susie/Gus fatty hillibike niche. On Friday, January 10, 2025 at 10:55:09 AM UTC-7 Frank Brose wrote

[RBW] BikeSnob NYC reviews his new lugged Roadini build

https://bikesnobnyc.com/2025/01/06/new-year-new-bike/amp/ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To v

[RBW] WTB: Crust Juan Martin bars

Hey y'all. I'm slowly accumulating bits for a Susie build. I'm buying more new bits than I have in the past, so figured I'd put the ask out there to try get some secondhand (or third or fourth) bars. I know I'm lessening my chance of finding 'em but I'm looking for the silver 26.0 version,

Re: [RBW] Re: NMSW

On Tuesday, November 19, 2024 at 7:58:12 PM UTC-5 Teague Scott wrote: > >> Thanks Ed, Josh >> >> Good to hear about the polished NMSW working out for you. I'm planning on >> following suit. >> >> Did some more googling. *Velocity says*: >> &qu

Re: [RBW] Re: NMSW

r fatties. I couldn't be > happier. I've been ordering mine from Peter White Cycles with Son Dynamo up > front and White Ind out back. Love everything about them. > > On Tuesday, November 19, 2024 at 7:00:24 PM UTC-5 Ed Fausto wrote: > >> Hi Scott, >> &g

Re: [RBW] Re: NMSW

Digging this thread up... About to get into building some wheels for my new-to-me Susie. I'm getting some Cliffhangers, leaning towards NMSW, and am contemplating silver (ano?) vs. polished. I didn't see any mention of a difference between these two finish types in the thread so far. I guess po

[RBW] Re: Cycling caps: useful or merely decorative?

Walz caps makes great ones- a variety of materials. https://www.walzcaps.com/ The mesh caps (like Patagonia) not great for us bald guys- would be a funny sunburn. On Friday, October 4, 2024 at 9:38:53 AM UTC-4 brianmark...@gmail.com wrote: > I always wear one under my helmet. Catches sweat, give

Re: [RBW] Re: Haters Gonna Hate - for the "Cult-like Fanbase"

Just want to point out that since releasing the Romanceur, Lightning Bolt, and (pretty sure) Nor' Easter models, originally disc-only framesets, Crust has subsequently offered each in a rim-brake flavor as well. Cough cough, sounds like some trend-following to me ;) On Wednesday, September 25,

Re: [RBW] WTB: 59 Susie frameset

First off, I want to thank y'all for reaching out/chiming in here or directly. *Garth*, I've had a couple leads on Susies come in already, thanks for the offer. I've had some phone chats with a couple potential 59cm fillet sellers (always great connecting with folks from the bunch that way) who

Re: [RBW] WTB: 59 Susie frameset

Alas, it must be a 59. 94cm pbh here. On Sunday, September 22, 2024 at 9:08:27 AM UTC-7 rmro...@gmail.com wrote: > Teague, must it be a 59? C&L still has a 56. > Sent from my iPhone > > On Sep 21, 2024, at 11:59 PM, Teague Scott wrote: > >  > > Sitting here, still

[RBW] WTB: 59 Susie frameset

Sitting here, still nursing a broken heart after missing out on Bones' Susie a couple of weeks back. Joined the group some years ago but have held out on getting a Riv ($$$; been rocking the Riv-adjacent). I thought this might be the one! Was emailing back and forth, deep in contemplation, and

Re: [RBW] Re: 55 cm Platypus on Amtrak

Scott here. My wife was kind of roped into the ride by a friend and she had a lot of fun. I actually mentioned to her that you bike was the idealized version of the bike I'd like for her to ride, but she's resistant to buying a Riv for herself. This one in the picture is a Trek 1984

Re: [RBW] Re: UP Michagan

> *From:* rbw-owne...@googlegroups.com on > behalf of Scott Marriott > *Sent:* Tuesday, June 4, 2024 5:52:00 PM > *To:* RBW Owners Bunch > *Subject:* [RBW] Re: UP Michagan > > Not the stretch by Copper Harbor? - > https://www.visitkeweenaw.com/things-to-do/scenic-

[RBW] Re: UP Michagan

Not the stretch by Copper Harbor? - https://www.visitkeweenaw.com/things-to-do/scenic-drives/ On Tuesday, June 4, 2024 at 3:47:30 PM UTC-5 Bernard Duhon wrote: > Tunnel of Trees, Rd., Petoskey, MI > > Get Outlook for iOS > -- > *From:* Bernard

[RBW] Re: Bike build day: Atlantis w/ Bullmoose & '81 Trek 510 Jean-Luc Picard

Haven't heard of an old Trek frame potentially fitting 48s... what year is this 510? I have an '83 614 frame hanging up in the shed, waiting for a 650b conversion. From what I've read it'll fit 42s & fenders, but only with dimpling. On Thursday, April 25, 2024 at 12:15:03 PM UTC-6 exliontamer w

[RBW] Re: Gravel Tires for Cheviot

was doing at the time. I loved > both tires and the bike, but prefer the capability and clearance with the > 48's in my Appaloosa. 42's like the Ultradynamico or Rene Herse would > likely be a perfect middle ground. > > Eric > Indpls > > On Tuesday, April 16, 2

[RBW] Re: Gravel Tires for Cheviot

> Bill Lindsay > El Cerrito, CA > On Tuesday, April 16, 2024 at 8:57:42 AM UTC-7 R. Scott Lake wrote: > >> Wanting to change the shoes on my Cheviot and use as a gravel bike on >> flat trails in Lowcountry of SC. >> Currently have 38 Schwable LBB. >> I think the

[RBW] Gravel Tires for Cheviot

Wanting to change the shoes on my Cheviot and use as a gravel bike on flat trails in Lowcountry of SC. Currently have 38 Schwable LBB. I think the Cheviot can handle 45's (without fenders). Any suggestions? Panracers, Rene Herse? Other? Thanks! -- You received this message because you are subs

Re: [RBW] Re: Ron's Ortho... stem question

I've been happy with a 120mm lugged stem w Orthos on my 62cm Atlantis. Sometimes when I'm jumping on the bike quickly I get the feeling my bars just slipped downward but actually they just flexed! So the stem is grabbing pretty well to not slip in this scenario. The stem has pronounced rigi

[RBW] Re: Susie Build

y with a sewing machine they're not > too technical to make, just time consuming. > > On Friday, February 9, 2024 at 3:07:00 PM UTC-6 Teague Scott wrote: > >> Nice build! Wondering who crafted that saddlebag 🤔 >> >> On Thursday, February 8, 2024 at 5:33:4

[RBW] Re: Susie Build

Nice build! Wondering who crafted that saddlebag 🤔 On Thursday, February 8, 2024 at 5:33:44 PM UTC-7 in...@brentknepper.com wrote: > good shots Ben! > > -Brent in chicagotoo > > On Thursday, February 8, 2024 at 4:35:13 PM UTC-6 Ben Hannon wrote: > >> No derail! The forward position has shellac b

Re: [RBW] Re: Manivelle basket rack on Sam Hillborne

might be nice to have an easily removable basket on > this Sam - and since so many others do the Marks / Wald combo there is a > reasonable chance I will learn they are right! Until that time…I am having > fun with this $94 solution! > > On Tue, Jan 30, 2024 at 1:13 PM Teague Scott

[RBW] Re: Manivelle basket rack on Sam Hillborne

This rasket has had me intrigued for a while now! Cool to see one in use here. What do you think of the Manivelle? How does it hold up to a decent load? Does it get a little noodly? I'd plan on using it on my basketpacker. I currently use a big ol' Surly rack with a 139 strapped to it. Works we

[RBW] FS: Nitto 34f front rack 700c

New condition with original unused hardware size: 700c wheels $175 shipped in lower 48 flickr photo here: https://flic.kr/p/2prSs8g located in VA -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and sto

Re: [RBW] Re: FS: Jumbo Rosco Bubbe Iditabike

build! Any idea on minimum saddle height and max tire size?On Thursday, January 4, 2024 at 12:54:49 PM UTC-6 Teague Scott wrote:Oh man. I’ve been waiting for the day one of these popped up here. Alas, now is just not the time for me. Someone is gonna be a lucky dog!On Thursday, January 4, 2024 at 11:02

[RBW] Re: FS: Jumbo Rosco Bubbe Iditabike

Oh man. I’ve been waiting for the day one of these popped up here. Alas, now is just not the time for me. Someone is gonna be a lucky dog! On Thursday, January 4, 2024 at 11:02:37 AM UTC-7 steve...@gmail.com wrote: > Nice build Kai - for sure the wildest Rivendell I've seen yet. Just > looking

[RBW] Re: A. Homer Hilsen fender clearance

My AHH is an older Toyo frame and it fits 52mm fenders no problem. No need for dimpling or anything. I would think the fenders you have in mind would work very well. On Tuesday, November 7, 2023 at 11:31:02 PM UTC+2 Ryan Ray wrote: > Does anyone have first hand experience with fitting fende

[RBW] Re: Bedrock Mountain Clogs in Stock!

Wow these are cool. Thanks for getting them on my radar. Wondering whether sizing runs true to their sandals... On Tuesday, October 24, 2023 at 1:29:47 PM UTC-6 Calvin Yolo wrote: > I had the leather ones and just purchased the green suede as a back up > pair. I have a ton of miles walked in my

[RBW] FS: Nitto, IRD Cafam, Brooks

brake levers for cantis, center pull and road brakes new in package $85/pair Full brake setups above w levers included $250 / free shipping pictures here.. https://www.flickr.com/photos/147564748@N06/sets/72177720311525455/ located in VA. Thanks! -Scott -- You received this message because

Re: [RBW] Re: Single Speed (QB/SO/RU..) Questions

gt; weight. > > And Mr. Blake is at the time of this 1930 feature an elder cycling > statesman looking back to the 1890s for solutions to modern problems. > > > On Sat, Sep 23, 2023 at 12:01 PM Scott G. wrote: > >> Who needs sticks or tin cans, you can make a floating cha

Re: [RBW] Re: Single Speed (QB/SO/RU..) Questions

Who needs sticks or tin cans, you can make a floating chain drive train, like Vernon Blake. The Veteran Cycle Club put out neat little book on Mr. Blake, worth hunting down. https://singletrackworld.com/forum/topic/gravelbiking-its-nothing-new-you-know/ On Friday, September 22, 2023 at 6:53:20

[RBW] Re: FS: Nitto R14, Nitto/Ocean Air Cycles Erlen racks

All sold. thanks! On Sunday, September 3, 2023 at 4:21:19 PM UTC-4 scott minor wrote: > *Erlen sold*. > > R14 available. > > Thanks! > > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: FS: Nitto R14, Nitto/Ocean Air Cycles Erlen racks

*Erlen sold*. R14 available. Thanks! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this disc

[RBW] FS: Nitto R14, Nitto/Ocean Air Cycles Erlen racks

. Comes with single bolt for Nitto seat post. $115 Located in VA. Thanks! -Scott -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-ow

Re: [RBW] Upcoming Riv Ride: Chicago

Any updates to this one yet? It will be good to visit the new location of Mack's either way. Scott, Chicago (Hyde Park) On Thursday, August 17, 2023 at 1:49:36 PM UTC-5 Bicycle Belle Ding Ding! wrote: > Just a reminder to mark your calendars for the Chicago Riv Ride on Aug >

Re: [RBW] Summer Riding in Alberta

Mack, Nicely done! Really enjoyable to watch and listen. (no music, yay!) -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@g

Re: [RBW] Re: Alternatives to Snoqualmie Pass?

I've been riding Snoqualnie Pass standard casings tubeless on my Homer with nary a flat until recently, and after the 3rd flat this summer I have retired them. They had a good life but now seem too worn to keep going reliably. The rear eventually stretches a couple mm's in width over time whic

[RBW] Re: WTT: Swift Panniers for Sackville HappiSack

Jared, sent you an email.. thanks! On Wednesday, August 16, 2023 at 9:33:48 PM UTC+3 jaredwilson wrote: > $200 + ship > > On Tuesday, August 15, 2023 at 5:03:34 PM UTC-7 jaredwilson wrote: > >> Open to other colors, or other make/model medium-large bags. >> >> Thanks :) >> >> jared >> On Sun

Re: off-list- Re: [RBW] FS: 60cm Gus complete or F/F/HS

Gus has a new home! Had a nice 30+ mile ride with the new owner today.. good times all around. Thanks all, -Scott On Tuesday, July 25, 2023 at 10:32:06 PM UTC-4 Danny wrote: > Hi Scott, > > Such a gorgeous bike/build, nice work! If I didn't already own an orange > Sus

[RBW] FS: 60cm Gus complete or F/F/HS

brass and steel spacers, Tosco 31.8 handlebars, Brooks B-17 carved saddle, VP pedals, removable ergo grips. Located in VA pics here.. https://flic.kr/s/aHBqjANohX thanks! -Scott -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch&

[RBW] Re: bike mechanic in Boise

You might try Ryan at Bike Touring News on 36th and Hill. He’s a solid dude. They used to sell Rivs. Since he took over the shop pretty much focuses on Surly, but he still stocks excellent parts and is really knowledgeable about bicycle adventuring in Idaho. - Teague in Boise On Wednesday, Jul

[RBW] Re: FS: Fab's Fanny Waxed Cordura Olive Bag

Fanny is sold. thanks! On Friday, July 21, 2023 at 3:33:19 PM UTC-4 scott minor wrote: > Passing along a Fab's Fanny in good condition. Waxed cordura material. > Used only occasionally over the last year. > > $150 shipped > > [image: IMG_4760.jpg] > -- You rec

[RBW] FS: Fab's Fanny Waxed Cordura Olive Bag

Passing along a Fab's Fanny in good condition. Waxed cordura material. Used only occasionally over the last year. $150 shipped [image: IMG_4760.jpg] -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and sto

[RBW] Thinking about Roadini

Intrigued by the Roadini release tomorrow. - Current stable is 61cm Cheviot for commutes, groceries- my favorite ride. - I have.a relatively new 58 Surly Straggler that I am using as my road bike. - Has always felt a bit aggressive. Get a little sore and numb after a while.

Re: [RBW] Re: Roaduno

All this talk of dropouts, Grant mentioned last week on a Path Less Pedaled YouTube video (around the 55min mark) that Roaduno will have 'rear facing dropouts of our own design'. On Tuesday, July 18, 2023 at 4:35:58 PM UTC-4 Edwin W wrote: > Bill is right (as usual), the Public V1 is fun to

[RBW] Re: FS: RH/Compass Antelope Hill EL 700x55 / Honjo Smooth 74 fenders

t;> Simworks by Honjo Smooth 74 Silver fenders NEW never mounted or taken out >> of plastic sleeves. These will fit perfectly over the Antelope Hill tires >> and can be mounted on Clem or Gus/Susie. I still have the original >> packaging from Simworks for easy shipping.

[RBW] Re: FS: Nitto face plater stem, Tektro R559 calipers, Fab's Abs X11 bag

d face plater stem 100mm / 31.8 bar clamp - a few >>> insertion marks - $70 shipped >>> >>> -Tektro R559 brake set (recessed allen) one bike's worth. $60 shipped >>> >>> -Ron's Fab's Abs X11 tan handlebar bag - very light! barely used $85

[RBW] FS: Nitto face plater stem, Tektro R559 calipers, Fab's Abs X11 bag

shipped -Ron's Fab's Abs X11 tan handlebar bag - very light! barely used $85 shipped Located in VA photos here.. https://www.flickr.com/gp/147564748@N06/upJ2287115 thanks! -Scott -- You received this message because you are subscribed to the Google Groups "RBW Owners Bun

Re: [RBW] Re: Fendering My Atlantis

Fenders turned out sweet, Luke. I dig the flat profile, way clean! On Sunday, January 22, 2023 at 10:57:09 PM MST, Luke Hendrickson wrote: Thanks much, Keith! On Sunday, January 22, 2023 at 9:20:57 PM UTC-8 Keith P. wrote: Great looking bike, Luke! k. On Jan 22, 2023, at 8:49 PM, Lu

Re: [RBW] Gus owners, does your RD/shifter cable rub against kickstand bracket?

he line of site from cable guide along underside of down tube to see what I mean. As always, I may be incorrect... Scott On Wednesday, January 18, 2023 at 11:53:31 AM MST, Richard Rose wrote: Very interesting. My rear derailleur has yet to arrive but this got my attention! So I installed

Re: [RBW] Re: Fendering My Atlantis

Patirck, Killer! Thanks for sharing your experiences with various fenders/materials. Scott On Wednesday, January 18, 2023 at 10:54:41 AM MST, Patrick Moore wrote: I've installed about the same number of metal -- Honjo, VO, Berthoud, Kelpie, Wald -- but mostly VO -- and pl

Re: [RBW] Re: Fendering My Atlantis

Jay, Thanks for pointing out differences in materials fenders are made of. I'm a fenders virgin, so it's insightful! Definitely a characteristic I'll weigh heavily when I purchase a set. As a long-time user of SKS fenders, do you have any gripes with them? Scott On Wednes

[RBW] Gus owners, does your RD/shifter cable rub against kickstand bracket?

Gus owners, When doing a trial run of my RD/shifter cable from the BB cable guide to chain stay housing stop, it contacts underside of the kickstand bracket. Not proper in my mind. If you have same situation, how are you going to correct it, or just leave it? What say you? Scott -- You

Re: [RBW] Re: Fendering My Atlantis

Luke, after you get and fuss with them fenders, post the results, please. Some pictures to go with would be great. On Friday, January 13, 2023 at 07:50:50 PM MST, Luke Hendrickson wrote: Scott – I ordered the Flat 65 yesterday after some consideration. I hope it’ll arrive by Tuesday

Re: [RBW] Re: Cutting tnreadless steer tube

, an obsession that transcends trends. Tre... | | | Scott On Tuesday, January 17, 2023 at 05:01:05 AM MST, Richard Rose wrote: Thanks folks. You all have confirmed my own thoughts. Sent from my iPhone On Jan 16, 2023, at 11:25 PM, Joe Bernard wrote: Ed's solution is pro

Re: [RBW] Re: WTB: seatpost Nitto S83 26.8 300mm

Thanks for the lead, Ryan. I saw the 350 on Riv's site. I'm not completely opposed to savagery, but it's plan C. Scott On Tuesday, January 17, 2023 at 07:54:09 PM MST, Ryan Frahm wrote: Rivendell has the 350mm. Could always cut it if needed! On Tuesday, January 17,

[RBW] WTB: seatpost Nitto S83 26.8 300mm

If anyone has a Nitto S83 in 26.8 x 300mm in good to better condition, please message me off list. Or if someone has a lead as to where to purchase one new, that'd be great, too. I've tried a number of different vendors but all were out of stock. Thanks, Scott -- You received th

Re: [RBW] Re: bottom bracket toubleshooting trivia

deft (IMHO), I lack the metrics one gains through voluminous installations of various bits. BUT, I'm not scared to ask those that do have experiences, so thanks, all! Hope everyone's 2023 is off to a good start... Scott On Tuesday, January 17, 2023 at 05:39:16 AM MST, ascpgh wr

Re: [RBW] Re: Sam Build - Wish Me Luck!

Bill: Specifically, which model Nitto bull bar, clamp diameter, and width bar are you considering running? I'm building an Atlantis, too. And I'm strongly considering a bull bar and wonder what you're on to. Thanks, Scott On Monday, January 16, 2023 at 06:57:32 AM MST, Bill

Re: [RBW] bottom bracket toubleshooting trivia

11:44:35 AM MST, 'Scott' via RBW Owners Bunch wrote: Hey, Bunch: Pinging the group's knowledge for input/feedback on an issue I'm having with an install of a new cartridge style BB in a new frame. I'm building a new Atlantis and Gus. I installed a new BB (Shimano X

[RBW] bottom bracket toubleshooting trivia

a new frame...screw it in. That's the problem, in part. There's nothing to correct with install technique. I'd love to be wrong and get it butter smooth like one in my Atlantis, for example. Please, share your thoughts as to what the source of issue may be and recommended remedy! S

Re: [RBW] Re: Fendering My Atlantis

What did you discover? Did you by chance try the Flat 65? On Thursday, January 12, 2023 at 09:42:36 AM MST, Luke Hendrickson wrote: Man, wonderful info about the 74s – thank you for taking the time to relay that. The above posted photos of them show a significant amount of modificatio

[RBW] Re: Fendering My Atlantis

I have a set of smooth 74's in my shop for another bike (not yet fitted) and holding them up to my Atlantis, they don't fit without cutting and heavily dimpling the fenders to fit between seat stays, also fork blades, and remove fender material around the chain stays. Not for the faint of hea

Re: [RBW] Last Gus and Susie, 1/12/23, 3est

Anybody taking the plunge for a Gus or Susie? On Wednesday, January 11, 2023 at 06:25:04 PM MST, Joe Bernard wrote: This is it kids, 3 Eastern, 12 Pacific. Be there. Aloha.  -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To uns

[RBW] Re: FS: Nitto / Simworks Rumble bars

SOLD many thanks! On Wednesday, January 11, 2023 at 10:57:08 AM UTC-5 scott minor wrote: > Simworks / Golden Pliers collab, these sold out really quickly. Offering > them here after finding them too wide for my purposes. There are some > faint marks around the clamp area but

Re: [RBW] Re: Roller-Cam brakes

+1 for Ryan's request for more pics Sent from Yahoo Mail on Android On Tue, Dec 27, 2022 at 6:29 PM, Ryan wrote: I know this is a Rivendell forum...but show us more pictures of this lovely bike , please Hope everyone is safe and warm and managing to enjoy family time in the holidays  in t

[RBW] For Sale: Nitto, VO, Riv Silver, Cambium

hipping cost with buyer for bigger items like bars and saddle), and I have boxes for handlebars already which makes it pretty easy to offer these bars for sale. Thanks! -Scott -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To un

Re: [RBW] ISO: Missing Link wheel building book

David, Grateful for the tip. I'll check it out. Scott On Friday, December 16, 2022 at 04:23:04 PM MST, David Person wrote: I am unfamiliar with this publication and don't mean to hijack your post, but when I took up wheel building two years ago I purchased a copy of Roger

Re: [RBW] Is there a 31.8 clamp drop bar comparable to a Nitto Noodle 54cm?

It sounds like a good bar to have in the quiver. And exactly what do you mean it likely won't work with my stem, too much reach? I have Nitto FacePlaters in 60, 85, 110, and 135 and was thinking about starting with 60 as a starting point. Cheers, Scott On Friday, December 16, 202

Re: [RBW] ISO: Missing Link wheel building book

Oooo. I'd sure like same! Scott Sent from Yahoo Mail on Android On Fri, Dec 16, 2022 at 1:43 PM, Slin wrote: Hi All, I was just chatting with Rich Lesnik and he recommended a wheel building book/pamphlet from the Missing Link (sad hearing that shop is closing, btw). I was wonderi

Re: [RBW] Re: FS: Headsets and Chains

Jim, Thanks for your efforts to share pictures of headset. Cheers, Scott Sent from Yahoo Mail on Android On Wed, Dec 14, 2022 at 10:31 AM, Jingy wrote: Scott, here are the photos you requested and a link to some more:  https://drive.google.com/drive/folders/1v5Hsa_jF_Y3cdLF9GDtnCxCac

Re: [RBW] Re: FS: Headsets and Chains

y pleasing, anyways. I could do without the lettering/language, as I don't like serving as a company's billboard. Are bearings cartridge or carriage type? Cheers, Scott Sent from Yahoo Mail on Android On Tue, Dec 13, 2022 at 5:54 PM, Eric Marth wrote: Scott — Nice for the price and

Re: [RBW] Re: FS: Headsets and Chains

Eric, what's your in-hand impression of the headset? On Tuesday, December 13, 2022 at 03:17:05 PM MST, Eric Marth wrote: Thanks again to Corwin for helping with the sale and purchase of these headsets. I've got one I'm preparing to use for a build.  I understand the Grease Guard desig

Re: [RBW] Cliffhanger alternatives?

#x27;t hesitate to run 2.8 on my Cliffs, whenever they show up on my door step... Also, please share what shakes out in your BB search for your Gus. Best, Scott in about to get very cold Montana On Tuesday, December 13, 2022 at 08:29:36 AM MST, Richard Rose wrote: 2.5"-2.6"

Re: [RBW] Re: New Gus & bottom bracket confusion

me if you wanna drill down on it. I need to sort it out, too. Scott Sent from Yahoo Mail on Android On Mon, Dec 12, 2022 at 10:06 AM, Richard Rose wrote: Oh I agree & believe me I call them a lot! I just thought the collective brain power of this group might give me an answer bef

Re: [RBW] Re: Nivex on a Rivendell?

That's a really cool bit, yet it's a lot to spend just to be different and stylish. What's the functional benefit to investing in one? Sent from Yahoo Mail on Android On Mon, Dec 12, 2022 at 10:25 AM, James M wrote: Pretty cool - but another $250 for the shift lever.  Still great to see

Re: [RBW] New Gus shipping from Canada

Shouldn't the dealer be able to answer that for you? Sent from Yahoo Mail on Android On Mon, Dec 12, 2022 at 10:34 AM, Jacob Byard wrote: I bought my Gus from C&L Cycles out of Montreal. They shipped it to me (Pennsylvania) via UPS. I think it took 3 days? UPS sent me the bill for import

Re: [RBW] Is there a 31.8 clamp drop bar comparable to a Nitto Noodle 54cm?

Patrick: Please, clarify what you mean by "best road drop bar on the market at least for non-brifter brake levers." I have a set of Ultegra brifters I'm wanting to install on my newly purchased HR Randonneur bars, as you know are similar to the Maes Parrallel. Scott On Sund

Re: [RBW] Re: How you choose 2 Rivendells?

e one sits on a bike). Furthermore, I may be wrong (not unusual), but it seems a longer wheel base bike would, ratio-wise, weight the front end more, to a degree (at least it does in the dirt bike world). Scott Sent from Yahoo Mail on Android On Sun, Dec 11, 2022 at 2:46 PM, Joe Bernard

Re: [RBW] FS 62 cm 2022 MIT Atlantis 4100 OBO

, knowing what you know now?! Scott On Saturday, December 10, 2022 at 02:10:33 PM MST, Emmet Sheehan wrote: Since someone else already posted it, I'd figure i'd put it up here. Can maybe do a better deal if I sell it here instead of Ebay, shoot me an offer? I’m selling my 2022 MIT 62c

Re: [RBW] FS 62 cm 2022 MIT Atlantis 4100 OBO

akes to provide good breaking. What's your experience, since your set-up is just that? I'm wanting to run Ultegra 600 brifters with XTR v-brakes to get a set-up with a cockpit, brakes, and plump tires; like your (for now) Atlantis. Your thoughts, please? Scott On Saturday, December 10,

Re: [RBW] New Gus!

Brian, right on. Your reply answers what I was wondering. If you had more than enough stump-pull with 32 x 51, I'm hoping I get enough out of a 32 or 30 ring x 40 cog Sent from Yahoo Mail on Android On Sat, Dec 10, 2022 at 12:19 PM, Brian Turner wrote: Scott, I’m running 1x11. I

Re: [RBW] New Gus!

Correction: I have an 11-40 I want to try Sent from Yahoo Mail on Android On Sat, Dec 10, 2022 at 12:16 PM, 'Scott Luly' via RBW Owners Bunch wrote: Brian, how many speed cassette? I'm leaning 1x already. 11-51 is wide ratio, must be a 10 or 11?I have a 31-40 8 spd I wa

Re: [RBW] New Gus!

nkset and bottom bracket (BSA) and I’m using a Deore M5100 RD and matching 11-51 cassette. I originally installed a 32t ring up front, but last week I swapped it for a 34t to give me a little more on the high end. On Dec 10, 2022, at 1:12 PM, 'Scott Luly' via RBW Owners Bunch wrote:

Re: [RBW] New Gus!

cipe for a yummy Gus drivetrain. Did you score a complete bike or f/f? Merry, early, Christmas... Scott On Saturday, December 10, 2022 at 09:17:31 AM MST, Richard Rose wrote: Wow, what a few days. I love my Clem so much that I have been really craving a Susie as a dedicated singletra

Re: [RBW] Re: Pedals, MKS XC Bear Trap III vs. MKS Bubble Pedals

factory, probably just right. It's unlikely they lack grease straight from factory and that you'll be able to improve tightness. In some rare cases overtightened/undergreased, maybe, but very unlikely. The factory isn't like us trying to set "tightness." Just my 2 penn

Re: [RBW] Re: What's Good - Wide-ish/flared drops edition...

rspective? Help me out here? Scott On Friday, December 9, 2022 at 01:25:10 PM MST, Rusty Click wrote: Plus one for the Spank Flare. On Friday, December 9, 2022 at 9:36:15 AM UTC-5 bjmi...@gmail.com wrote: Hey everyone!I posted earlier about reach in converting to a wider bar and dec

Re: [RBW] Gus & Susie frames available at Crust

The Gus XL orange has sold...TO ME! Thanks for posting, Eric! What a lead on a Friday afternoon. Christmas came a few weeks early Scott with smile On Friday, December 9, 2022 at 04:27:11 PM MST, Eric Marth wrote: If anyone missed out Crust just stocked Gus & Susie frames. They

Re: [RBW] Gus & Susie frames available at Crust

Missed out from when? Last batch was when, last year? Was there a recent dump from Riv? Tell me I didn't miss a recent sale from Riv? On Friday, December 9, 2022 at 04:27:11 PM MST, Eric Marth wrote: If anyone missed out Crust just stocked Gus & Susie frames. They got just one frame

Re: [RBW] If you convince Rivendell to bring back "one" former model

I vote long stay version of Glorious and Hunqapillar in CLEAR COAT... I hope Grant is listening On Thursday, December 8, 2022 at 03:11:33 PM MST, Mackenzy Albright wrote: All these threads about "choosing the one Riv" or "how do I pick which model" got me thinking. If you could convin

Re: [RBW] Is there a 31.8 clamp drop bar comparable to a Nitto Noodle 54cm?

Conway, thanks for the tip. I just looked, and those Ride Farr drops are Supa-Wide...up to 750 mm! Ima get one on the shipping truck, in addition to the RH Randonneur I ordered prior to reading your post. Options are good, usually. Sometimes I plex too much on options...haha. Onward, Scott

Re: [RBW] Is there a 31.8 clamp drop bar comparable to a Nitto Noodle 54cm?

Steve, Are you in same position I am, looking for a 31.8 drop? Did you see the RH Maes Parallel on the their site? Thoughts?! Has anyone else tried the RH Randonneur or Maes Parallel? Takes, please? Best, Scott On Thursday, December 8, 2022 at 05:37:57 AM MST, Steven Sweedler wrote

  1   2   3   4   5   6   7   8   9   10   >