On 31.08.2021 10:04, Lucian Cristian wrote:
frr 8.0 needs host libelf dev
add option for host build
tested on x86, ramips, kirkwood
Signed-off-by: Lucian Cristian
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https
frr 8.0 needs host libelf dev
add option for host build
tested on x86, ramips, kirkwood
Signed-off-by: Lucian Cristian
diff --git a/package/libs/elfutils/Makefile b/package/libs/elfutils/Makefile
index d595e4caf2..b0c9b8bd8c 100644
--- a/package/libs/elfutils/Makefile
+++ b/package/libs
This fixes Hardware Offload on MT7621
Signed-off-by: Lucian Cristian
diff --git
a/target/linux/generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch
b/target/linux/generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading
On 31.01.2021 20:43, Hauke Mehrtens wrote:
The U-Boot build for more and more SoCs is using binman by default to
combine the images (SPL, U-Boot, ...). Binman is build from the U-Boot
project and it needs swig to build. We have multiple patches in OpenWrt
to remove this dependency from U-Boot,
On 18.05.2020 16:04, Linus Walleij wrote:
We used to have samba36 as a package in the NAS images
but that was retired in commit 73fa1aba94f5
"samba36: Remove" however it is nice to have a fileserver
so put samba4 in the package instead.
Signed-off-by: Linus Walleij
---
target/linux/gemini/ima
On 02.05.2020 14:46, b.l.huang wrote:
Hi all,
Hi all, I am trying to run openwrt on rk3328, but the kernel hanged
when booting, below is the log.
Any hints will be appreciated.
U-Boot 2020.01 (Apr 07 2020 - 11:55:14 +) Model: Radxa Rockpi E
DRAM: 1022 MiB PMIC: RK8050 (on=0x40, off=0x00)
all
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
tested on debian 8, mvebu
Tested-by: Lucian Cristian
___
openwrt-devel mailing list
open
ead (4 bytes read)
[ 10.550301] random: mkfs.f2fs: uninitialized urandom read (16 bytes read)
[ 11.420925] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 13.321222] random: crng init done
Regards
Tested-by Lucian Cristian
___
On 09.04.2019 01:28, Tomasz Maciej Nowak wrote:
W dniu 08.04.2019 o 23:56, Lucian Cristian pisze:
On 08.04.2019 20:19, Tomasz Maciej Nowak wrote:
Hi Petr, Alberto,
W dniu 08.04.2019 o 14:34, Alberto Bursi pisze:
On 08/04/19 11:42, Petr Štetiar wrote:
Tomasz Maciej Nowak [2019-04-07 18:35
On 08.04.2019 20:19, Tomasz Maciej Nowak wrote:
Hi Petr, Alberto,
W dniu 08.04.2019 o 14:34, Alberto Bursi pisze:
On 08/04/19 11:42, Petr Štetiar wrote:
Tomasz Maciej Nowak [2019-04-07 18:35:01]:
Hi,
thanks for trying to unbreak currently failing Geode builds.
Building images for geode ha
On 16.03.2019 19:52, W. Michael Petullo wrote:
A number of upstream projects are beginning to use the Meson/Ninja build
system. OpenWrt's sound/mpc and libs/libmpdclient kludge around this,
and I would like to update the glib2 package. The latest version of
glib2 uses Meson/Ninja.
Is there any p
On 14.03.2019 13:30, txt.file wrote:
Which other drivers implement this cipher? Is this cipher in the IEEE 802.11
documents standardized?
On March 14, 2019 10:03:16 AM UTC, Robert Marko wrote:
This patch will add support for using GCMP as cipher suite.
This is not a strong cipher but is only
On 06.02.2019 16:08, Tomasz Maciej Nowak wrote:
W dniu 04.02.2019 o 09:29, Lucian Cristian pisze:
On 13.01.2019 23:49, Tomasz Maciej Nowak wrote:
This is aftermath of partially failed series [1].
When I was searching for ways to upgrade of bootloader on existing
OpenWrt installations, I
On 13.01.2019 23:49, Tomasz Maciej Nowak wrote:
This is aftermath of partially failed series [1].
When I was searching for ways to upgrade of bootloader on existing
OpenWrt installations, I noticed that it'll be difficult to add this
feature within existing code creating x86 target images. I deci
On 10.12.2018 11:10, Yousong Zhou wrote:
On Mon, 10 Dec 2018 at 04:35, Lucian Cristian wrote:
I would like to propose a patch for ca-certificate to fix the following
error
Traceback (most recent call last):
File "certdata2pem.py", line 150, in
encoded = base64.b64
I would like to propose a patch for ca-certificate to fix the following
error
Traceback (most recent call last):
File "certdata2pem.py", line 150, in
encoded = base64.b64encode(obj['CKA_VALUE']).decode('utf-8')
File "/usr/lib64/python2.6/base64.py", line 53, in b64encode
encoded = b
On 28.11.2018 21:44, Tomasz Maciej Nowak wrote:
Moving binding mount before check for saved sysupgrade configuration
made it unreachable. Fix it by moving binding mount after the check.
Fixes: f78b2616 (x86: mount writable bootfs)
Reported-by: Lucian Cristian
Signed-off-by: Tomasz Maciej Nowak
On 27.11.2018 19:59, John Crispin wrote:
On 27/11/2018 18:15, Tomasz Maciej Nowak wrote:
W dniu 27.11.2018 o 18:04, John Crispin pisze:
On 27/11/2018 16:11, Tomasz Maciej Nowak wrote:
W dniu 27.11.2018 o 14:47, Lucian Cristian pisze:
On 26.11.2018 23:58, Tomasz Maciej Nowak wrote:
W dniu
On 27.11.2018 19:04, John Crispin wrote:
On 27/11/2018 16:11, Tomasz Maciej Nowak wrote:
W dniu 27.11.2018 o 14:47, Lucian Cristian pisze:
On 26.11.2018 23:58, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 22:47, Lucian Cristian pisze:
On 26.11.2018 23:11, Tomasz Maciej Nowak wrote:
W
On 26.11.2018 23:58, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 22:47, Lucian Cristian pisze:
On 26.11.2018 23:11, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 21:44, Lucian Cristian pisze:
On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with
On 26.11.2018 23:11, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 21:44, Lucian Cristian pisze:
On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion
On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion, late loading off the microcode can be ineffective for some
processors [2] and for others disabled [3
On 08.10.2018 11:56, Andre Heider wrote:
Hi Jason,
On 06/10/2018 05:09, Jason A. Donenfeld wrote:
diff --git a/package/network/services/wireguard/Makefile
b/package/network/services/wireguard/Makefile
index 29c7447..3544e34 100644
--- a/package/network/services/wireguard/Makefile
+++ b/package
On 29.05.2018 19:55, Jaap Buurman wrote:
Dear all,
Whenever flow offload is enabled (either software or hardware) I can
see many many active connections on the Luci overview page. It can go
up to thousands of active connections. Looking in the "connections"
part of the "realtime graphs" in Luci
On 07.07.2018 11:23, 李国 wrote:
maybe $(shell which time) --version 2>&1 | grep GNU
works good on centos6
Regards
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 06.07.2018 17:23, guo li wrote:
Hi Lucian Cristian
you may try run command
$ scl enable devtoolset-3 bash
$ make menuconfig
with clean source.
gcc has linked to staging_dir/host/bin when you first run make
and mconf has built when you first run make menuconfig
On 06.07.2018 14:09, Lucian Cristian wrote:
On 06.07.2018 13:03, 李国 wrote:
build openwrt on centos 6 I should use devtoolset-3 to get gcc 4.9, but
it fail when make menuconfig. so I have to give option HOSTCC='gcc
-Wl,--copy-dt-needed-entries' to make. But it passed to sub make to
HOS
On 06.07.2018 13:03, 李国 wrote:
build openwrt on centos 6 I should use devtoolset-3 to get gcc 4.9, but
it fail when make menuconfig. so I have to give option HOSTCC='gcc
-Wl,--copy-dt-needed-entries' to make. But it passed to sub make to
HOSTCC=gcc as micro SUBMAKE expand to HOSTCC=gcc
-Wl,--copy
On 28.06.2018 00:56, e9hack wrote:
Hi,
I'm using an Archer C7 v2 from TP-Link. Usually I build the image for Target System
"Atheros AR7xxx/AR9xxx". If I switch
over to "Atheros ATH79 (DTS)" and try to update my router, I got the following
error message:
root@:~# sysupgrade
/tmp/openwrt-ath79
On 20.06.2018 12:02, John Crispin wrote:
On 20/06/18 10:39, Lucian Cristian wrote:
On 20.06.2018 11:26, Robert Marko wrote:
You are missing CONFIG_NET_DSA_TAG_QCA
Thanks but it doesn't help !
Regards
___
openwrt-devel mailing list
op
On 20.06.2018 11:26, Robert Marko wrote:
You are missing CONFIG_NET_DSA_TAG_QCA
Thanks but it doesn't help !
Regards
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel
I tried the example found in bindings and in qca8k staging but I don't
have any output when the device starts or when the module is loaded, if
is built as module.
Tried with a qca9563+qca8337n switch and also with a qca9558+qca8327n
switch with id added to qca8k driver, I also enabled printk o
On 13.06.2018 11:51, Zoltan HERPAI wrote:
+ ucidef_set_led_wlan "wlan" "WLAN" "netgear:green:wlan" "phy0tpt"
is this needed ? @juppin just made a cleanup for wifi triggers
https://github.com/openwrt/openwrt/commit/14cb05909a8dc6e42008697b4fe47b8fa00789d8
Regards
_
On 30.05.2018 20:22, Martin Tippmann wrote:
find /usr |
xargs md5sum
I made the test on tl-wr841n-v9 with luci selected
these are the changes to squashfs
--- a/config/Config-images.in
+++ b/config/Config-images.in
@@ -149,8 +149,15 @@ menu "Target Images"
int "Block si
On 29.05.2018 21:08, Alex Maclean wrote:
+ ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
thank you for the tiny split, you can trigger this in dts, please have a
look at the PR's on github !
Regards
___
openwrt-devel m
On 28.05.2018 20:47, Linus Walleij wrote:
This is a second RFC version of the DSA driver for Realtek
RTL8366x especially RTL8366RB.
I've been beating my head against this one and I'm not really
clear on why my ethernet frames are not coming through to the
CPU port on the chip.
It appears when u
On 22.05.2018 13:53, Jaap Buurman wrote:
Dear Felix & others,
I am currently running a 18.06 snapshot image to start testing the
stability of the firmware and new features, including the lovely
hardware flow offload. While it is working extremely well (I am
finally able to max out my connection,
On 25.05.2018 13:06, Luochongjun wrote:
This patch adds supports for GL-AR750S.
Specification:
- SOC: QCA9563 (775MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 2x 1Gbps LAN + 1x 1Gbps WAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Button: 1x switch butto
On 24.05.2018 22:40, Martin Tippmann wrote:
On Thu, May 24, 2018 at 9:06 PM, Hauke Mehrtens wrote:
Please do not hesitate to re report some request that something should
be backported from master or some regression compared to lede-17.01, if
it looks like they got ignored and didn't got a respo
On 04.03.2018 17:15, Hauke Mehrtens wrote:
On 02/16/2018 01:46 PM, John Crispin wrote:
Hi,
whats on the critical todo list for the upcoming release ? i still have
a few minor things that I'll be adding shortly, apart from that I am
currently not aware of any huge problems. the release will be a
On 19.02.2018 08:41, John Crispin wrote:
On 18/02/18 22:43, Hauke Mehrtens wrote:
The next OpenWrt release will use kernel 4.9 and kernel 4.14 depending
on the target. All targets that are *not* on either kernel 4.9 or 4.14
will not be included in the next release.
I did some overview of the
On 19.01.2018 00:41, Zoltan HERPAI wrote:
On Thu, 18 Jan 2018, Hauke Mehrtens wrote:
On 01/18/2018 01:51 PM, Nick Lowe wrote:
Does an update to the Kernel, 4.9.77 and 4.14.14 need to be made to
properly address this? There are fixes to mitigate Spectre.
We even need a patch for GCC which w
On 13.01.2017 20:16, Mauro M. wrote:
Hello Mathias,
2 workarounds were suggested:
One was not acceptable as is defeated the purpose of a router asking
to configure static routes on EVERY host in a LAN
The second might work with some careful re-configuration of the
firewall. It did not in my
On 27.12.2016 04:54, TheWerthFam wrote:
Problem with this method is that it misses lots of HTTPS based sites.
I do already run squid though. Am I wrong that it will not proxy
https sites unless you use MITM type setup?
Thanks
On 12/26/2016 08:47 PM, Lucian Cristian wrote:
On 26.12.2016 19
On 26.12.2016 19:32, TheWerthFam wrote:
Using the adblock set of scripts to block malware and porn sites. The
porn sites list is 800,000 entries, about 10x the number of sites
adblock normally uses. With the full list of malware and porn domains
loaded, dnsmasq takes 115M of memory and normall
crypto-rng, enable prerequisite for drbg.ko, fixes #21596
Signed-off-by: Lucian Cristian
---
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 604be9f..d84c802 100644
--- a/package/kernel/linux/modules/crypto.mk
+++ b/package/kernel/linux
On 16.01.2016 04:31, Felix Kaechele wrote:
On 15/01/16 03:25, Lucian Cristian wrote:
Also support ATI PATA on x64 target
Signed-off-by: Lucian Cristian
Has already been NACKd before:
https://lists.openwrt.org/pipermail/openwrt-devel/2015-September/036155.html
Not entirely sure the situation
Also support ATI PATA on x64 target
Signed-off-by: Lucian Cristian
---
diff --git a/target/linux/x86/64/config-default
b/target/linux/x86/64/config-default
index a5947a2..b4c8b98 100644
--- a/target/linux/x86/64/config-default
+++ b/target/linux/x86/64/config-default
@@ -39,7 +39,8
48 matches
Mail list logo
