On 28.06.2018 00:56, e9hack wrote:
Hi,
I'm using an Archer C7 v2 from TP-Link. Usually I build the image for Target System
"Atheros AR7xxx/AR9xxx". If I switch
over to "Atheros ATH79 (DTS)" and try to update my router, I got the following
error message:
root@:~# sysupgrade
/tmp/openwrt-ath79-generic-tl-archer-c7-v2-squashfs-sysupgrade-d180627.bin &
root@:~# Device archer-c7 not supported by this image
Supported devices: tplink,tl-archer-c7-v2
Image check 'fwtool_check_image' failed.
Is Target System "Atheros ATH79 (DTS)" for Target Profile "TP-LINK Archer C7
v2" not compatible with Target System
"Atheros AR7xxx/AR9xxx" for the same Target Profile?
Regards,
Hartmut
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
It may be that board name has changed, what's your cat
/tmp/sysinfo/board_name ?
Now on ath79 should be tplink,tl-archer-c7-v2 so if doesn't match this
is the problem
You can safely try with -F, but you'll be needed to recreate the
/etc/config/wifreless file
Regards
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
