On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion, late loading off the microcode can be ineffective for some
processors [2] and for others disabled [3]. Also it is discouraged for
any processor starting from Haswell and Silvermont.
Therefore this series converts the Intel microcode bundle to an initial
ram disk which is loaded with grub, so kernel has access to it as early
as possible.
Previous patch series:
https://patchwork.ozlabs.org/project/lede/list/?series=39372
1. https://lore.kernel.org/patchwork/cover/348236
2. https://lore.kernel.org/patchwork/cover/348236/#508603
3.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=723f2828a98c8ca19842042f418fb30dd8cfc0f7
Changes in v4:
- copy also hidden files:
x86: add packages files to image bootfs
- no changes:
1) include/rootfs.mk: remove boot directory
2) x86: mount writable bootfs
3) intel-microcode: remove dependency on iucode-tool
4) x86: add intel microcode entries to grub config
5) intel-microcode: create early load microcode image
Change suggested by Philip Prindeville.
Changes in v3:
- replaced "include/rootfs.mk: move boot directory for later use"
with "include/rootfs.mk: remove boot directory"; the final rootfs is
always created after targets rootfs, so there's no need to save
files for later use, also there was side effect to this approach,
it kept the old files if packages version changed and buildroot
wasn't cleaned beforehand
- reflect the changes in "include/rootfs.mk: remove boot directory":
x86: add packages files to image bootfs
- expand commit message, narrow down the test in grub config:
x86: add intel microcode entries to grub config
- no changes:
1) x86: mount writable bootfs
2) intel-microcode: remove dependency on iucode-tool
3) intel-microcode: create early load microcode image
Changes in v2:
- three new commits allowing buildsystem to properly handle packages
installing files to /boot directory, mainly for x86 target:
1) include/rootfs.mk: move boot directory for later use
2) x86: mount writable bootfs
3) x86: add packages files to image bootfs
- uncomplicate test for AMD processors in:
x86: add intel microcode entries to grub config
- remove package specific hook in x86 image Makefile, remove
postinst/prerm scripts and install microcode directly to /boot:
intel-microcode: create early load microcode image
- no changes:
intel-microcode: remove dependency on iucode-tool
All changes in v2 suggested by Matthias Schiffer and Philip Prindeville.
Tomasz Maciej Nowak (6):
include/rootfs.mk: remove boot directory
x86: mount writable bootfs
x86: add packages files to image bootfs
intel-microcode: remove dependency on iucode-tool
x86: add intel microcode entries to grub config
intel-microcode: create early load microcode image
include/rootfs.mk | 1 +
package/firmware/intel-microcode/Makefile | 16 +++++++++-------
.../x86/base-files/lib/preinit/02_load_x86_ucode | 6 ++++--
.../x86/base-files/lib/preinit/79_move_config | 12 ++++--------
target/linux/x86/image/Makefile | 6 ++++--
target/linux/x86/image/grub-iso.cfg | 3 +++
target/linux/x86/image/grub.cfg | 3 +++
7 files changed, 28 insertions(+), 19 deletions(-)
this series I think are braking the boot on Via CPU's
grub complains with
error: can't find command '['.
error: file '/boot/amd-ucode.img' not found.
error: can't find command '['.
error: file '/boot/intel-ucode.img' not found.
Press any key to continue...
And you have to press any key..
Regards
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
