ate '25.
I'd be interested in a device like this that can boot off of SD card and with
4GB or more RAM so that I can
run full-blown Debian style OS on it...
And with easy access to serial port somehow.
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
_
On 8/12/22 11:37 AM, Dave Taht wrote:
any of our hw capable of using this new band?
mtk7915 can use this if I understand properly (like channel 177?)
https://github.com/greearb/linux-ct-5.19/commit/e73c819175f67096c5f82bdcc204a17643b681c5
Thanks,
Ben
-- Forwarded message
On 1/18/22 4:29 AM, Koen Vandeputte wrote:
Hi Ben,
After stress testing some wave 1 2x2 radios on multiple boards using openwrt
master I noticed this crash on 2 of them.
Any idea?
01:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless
Network Adapter
Thanks,
Koen
out 200 Mbps to about 80 Mbps
What am i missing?
Not sure, but maybe try leaving rate-control and rest of the stack alone.
Instead use ath10k 'set_rate_overrides'
debugfs to set rate as you wish and disable retries?
Thanks,
Ben
___
ainst upstream stable kernels) 4.19, 5.4
and 5.10 ath10k-ct driver versions. I have not tested this in owrt,
so if someone has time to pull this in and do some testing I'd
be grateful.
Thanks,
Ben
https://github.com/greearb/ath10k-ct
commit b44cd7b2e7b0df5995ece18f358d4dfc40834ba1 (HEAD
I am aware, just haven't had time to work on it yet.
Thanks,
Ben
On 5/27/21 4:05 AM, Nick Lowe wrote:
Hi Hauke,
I wonder if it is worth also opening an issue for this over at
https://github.com/greearb/ath10k-ct/issues ?
Best,
Nick
___
op
nsume?
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 1/14/21 10:05 AM, Ben Greear wrote:
On 1/13/21 4:58 PM, Sven Roederer wrote:
Ben,
seems to me, that at least "firmware-5-ct-full-community-12.bin-lede.013" is
still not recovered. File is there, but contains only 0x00.
This seems to cause my fresh build of 19.07.5 to fail.
Yes,
On 1/13/21 4:58 PM, Sven Roederer wrote:
Ben,
seems to me, that at least "firmware-5-ct-full-community-12.bin-lede.013" is
still not recovered. File is there, but contains only 0x00.
This seems to cause my fresh build of 19.07.5 to fail.
Yes, I verified that 9980 firmware is not
On 12/28/20 2:11 PM, Hauke Mehrtens wrote:
On 12/24/20 10:28 PM, Ben Greear wrote:
I just pushed this commit. I'm interested in feedback if anyone tests
it. It could fix some of the strange tx issues, and for the 5.10 kernel,
at least, it fixes very obvious tx-path issues.
c
I just pushed this commit. I'm interested in feedback if anyone tests
it. It could fix some of the strange tx issues, and for the 5.10 kernel,
at least, it fixes very obvious tx-path issues.
commit b753e8bf22b94297acbaa370b4cb0be87e3da4b8 (HEAD -> master, origin/master)
Author: Be
I think I fixed it all on our web page, let me know if otherwise.
Thanks,
Ben
On 11/9/20 1:42 AM, Nick wrote:
Can we somehow get to the same naming convention, again?
In OpenWrt it is: QCA998X-firmware-... directly in /.
On the ct server it is QCA998X/firmware-...?
Bests,
Nick
On 11/8/20 10
I tried to copy them all back into place...could have made mistakes since
owrt names them differently than what is on my web server.
Please try some older builds for various firmware and let me know if there are
still
issues.
Thanks,
Ben
On 11/8/20 9:49 AM, Baptiste Jonglez wrote:
Hi,
All
=983deaa2bf71b48a48fde534b8c325f7ec0ecaf9a76be43ca36b4e52614b3e55
firmware-5-ct-htt-mgt-community-qcache-12.bin-lede.022
/home/greearb/candela_html/downloads
Thanks,
Ben
On 11/7/20 1:40 PM, Nick wrote:
It is the firmware that is broken and just contains 0s.
On 11/7/20 6:54 PM, Nick wrote:
I
t.
commit 76280f692492fb9ddd506bddffab76efd2a57312 (HEAD -> master, origin/master)
Author: Ben Greear
Date: Wed Sep 16 14:31:42 2020 -0700
ath10k-ct: Allow override of dma_burst setting using fwcfg.
Previously tested and shown to work on 5.4 kernel, now applied to 4.16
through 5.8 kernels.
Signed-off-b
t.
commit 76280f692492fb9ddd506bddffab76efd2a57312 (HEAD -> master, origin/master)
Author: Ben Greear
Date: Wed Sep 16 14:31:42 2020 -0700
ath10k-ct: Allow override of dma_burst setting using fwcfg.
Previously tested and shown to work on 5.4 kernel, now applied to 4.16
through 5.8 kernels.
Signed-off-b
nity-12.bin-lede.020
b569c96eebcfd83d154453743f5c4f4492f033bcc8b0b6ee221b5ca419fe051f
firmware-5-ct-htt-mgt-community-qcache-12.bin-lede.020
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lis
t I think that diet variant is probably the best
choice.
Thanks,
Ben
I will send a v2 fixing this.
On 25-08-20, Baptiste Jonglez wrote:
From: Álvaro Fernández Rojas
For wave-2, there is now a new variant: htt-mgt-community (vs the old
full-htt-mgt-community).
The non-full one (hence forth
d2a7e9fea6bd854721b3fc03a3a00d379d303b2bce339377ee87a1c14a60312d
firmware-5-ct-full-htt-mgt-community-12.bin-lede.019
e52a6db33347c641ee791fd9a3a57a2503cdda1adc6b8d943e336431528b9d2a
firmware-5-ct-htt-mgt-community-12.bin-lede.019
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc
ommit 3637be6f6baf99e85a7f0b27f80a99a2f2a5f78d
Git commit IDs and recent change logs are below.
Thanks,
Ben
[greearb@ben-dt4 ath10k-ct]$ git log
commit 3637be6f6baf99e85a7f0b27f80a99a2f2a5f78d (HEAD -> master, origin/master)
Author: Ben Greear
Date: Wed Apr 29 08:30:39 2020 -0700
ath10k-
Hello,
I looked at this briefly and it looks OK to me. I did not test it out
though.
Thanks,
Ben
On 04/26/2020 05:26 AM, Álvaro Fernández Rojas wrote:
Hi Ben,
I've renamed the old full-htt-mgt firmwares and added the new ones as htt-mgt.
This way the user can choose between both of
4
rate_ctrl_objs = 7
regdom = 840
#fwname = firmware-5-htt-mgt-b.bin
fwver = 5
nohwcrypt = 0
ct_sta_mode = 0
tx_desc = 2000
#max_nss = 3
tids = 260
skid_limit = 360
max_amsdus = 3
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
_
9888
b295880a8b08ec2680d85daaf5f20232a0e73d9cc579bf3efd7ffae24ea340d7
firmware-5-ct-full-community-12.bin-lede.017
26fe7c00df10e93373a0f9f105e85d02bb8b1cdd629183ce22a5147138336aec
firmware-5-ct-full-htt-mgt-community-12.bin-lede.017
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatec
I just pushed a fix for wave-1 firmware. This bug was exacerbated by
a firmware fix that made power-save work better. Firmware update email
coming next...
commit 3d173a471d3e583f2885ce68190c4387424cecc5 (HEAD -> master, origin/master)
Author: Ben Greear
Date: Wed Mar 25 13:57:07 2020 -0
Sorry for the stale subject, this one is NOT actually about vlans.
On 3/17/20 10:01 AM, Ben Greear wrote:
commit 8df0a7f80a8bb2c49d3a16fe70f9a619d7bedd5a (HEAD -> master, origin/master)
Author: Ben Greear
Date: Tue Mar 17 09:58:25 2020 -0700
ath10k-ct: Pull in recent 5.4 stable,
t-mgt-community-12.bin-lede.016
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/lis
commit 8df0a7f80a8bb2c49d3a16fe70f9a619d7bedd5a (HEAD -> master, origin/master)
Author: Ben Greear
Date: Tue Mar 17 09:58:25 2020 -0700
ath10k-ct: Pull in recent 5.4 stable, etc
Includes better tx-override support for wave-1
Wave-1 can now disable periodic calibration (I th
On 02/17/2020 07:24 PM, Кирилл Луконин wrote:
Hello, Ben.
Does it mean that AP VLAN mode will use software encryption for every tx frame?
Best regards,
Kirill Lukonin
Hello,
I have not tested it, so not certain. Matthias reported it worked for him in
light
testing.
If you can test this
Thanks to Matthias Larisch for adding support for AP vlans on 10.1 ct firmware
and testing it out.
Upstream commit ID:
bed49a5f6824fcd8757fd27f6b2a4f6ea933bf2f
If someone can pull this into OpenWRT and test I'd appreciate it.
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc
9888
559ebd16872a8b43443c51bb4b7d021e5b75e65893d333d9393f3f6012f4ac79
firmware-5-ct-full-community-12.bin-lede.015
4feaf5e7c4c1745f499ba8c3125db41675800ebedaea455c418c117805c5b372
firmware-5-ct-full-htt-mgt-community-12.bin-lede.015
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Ca
Please see below for commit. New firmware message will follow shortly.
If someone can test and push to openwrt I'd appreciate it.
commit 3e3d0adb3cc6c6cf56a05ff661796948f09c5aa8 (HEAD -> master, origin/master)
Author: Ben Greear
Date: Wed Jan 29 08:14:56 2020 -0800
ath10k-ct:
a284943c203ff66ec2e865f20ae2d2aa049b450801d7205b53c9163862228f15
firmware-5-ct-full-htt-mgt-community-12.bin-lede.014
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel
On 12/16/2019 03:26 AM, Alberto Bursi wrote:
On 15/12/19 14:09, Christian Lamparter wrote:
But it seems that Ben had a change of heart in this regard. I don't know the
details or why, But it makes sense because it would enable his company to save
some money for the systems his co
add "low memory" support to ath10k.
FWIW, OpenWrt's ath10k vendor is CT now, not QCA, so it's not much
relevant what do ODMs and (whatever is left from) QCA say, I guess.
Well, not sure what you are trying to say here. But I think Ben is free
to do what he wants as well. F
On 12/11/19 11:16 AM, Paul Fertser wrote:
Hey Ben,
On Wed, Dec 11, 2019 at 10:06:26AM -0800, Ben Greear wrote:
On 12/11/19 6:44 AM, Paul Fertser wrote:
According to many bugreports [0][1][2] the default ath10k-ct kernel
...
And also if you want to just have the makefile pass a
hing
like that and #ifdef code in the ath10k-ct driver, then I'd apply that patch to
ath10k-ct
so that you don't need the patches.
Thanks,
Ben
Signed-off-by: Paul Fertser
---
package/kernel/ath10k-ct/Makefile | 30 +++-
...0-0010-ath10k-limit-htt-rx-ring-s
160Mhz has only 1/2 of the NSS of lower bandwidths in
the rate table.
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https
you need the patches for upstream ath10k, then you should also
apply
the patches to ath10k-ct.
Platforms with more memory probably do not need or benefit from those patches.
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
ignores the event.
* November 1, 2019: Fix rate-ctrl related crash when nss and other things
were changed while
station stays associated. See bug:
https://github.com/greearb/ath10k-ct/issues/96
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http
On 10/31/19 5:50 AM, Petr Štetiar wrote:
Ben Greear [2019-10-29 06:23:52]:
The original SO_BINDTODEVICE patches were offered upstream
and there is no interest.
It seems like there's finally some interest[1] and you do a good job over there.
Someone asked me to create a different b
On 10/28/2019 11:14 PM, Petr Štetiar wrote:
Ben Greear [2019-10-28 14:42:32]:
Hi Ben,
found and fixed a bunch of issues
apart from lack of time, do you've any other good reason to not upstream those
changes? :-)
The original SO_BINDTODEVICE patches were offered upstream
and the
at is going
on when
adding new features or debugging problems.
Source code can be found here:
https://github.com/greearb/iperf
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-
On 10/27/19 6:35 AM, John Crispin wrote:
On 17/12/2018 17:48, gree...@candelatech.com wrote:
From: Ben Greear
uci set wireless.@wifi-device[0].phyname=wiphy0
Then reboot and/or re-plug that device, and this will
name the phy wiphy0 instead of phy0, phy1, etc.
This can help keep phy names
hould document your setup when
complaining of bad throughput or any other problem. Compare good vs bad
situations to see what
is the difference.
That way someone who has actually tried this sort of thing might be able to
offer suggestions.
Thanks,
Ben
On Wed, Sep 25, 2019 at 5:11 PM +0200,
Is this short distance or long?
Please try short distance with omni antenna first to make sure you are not
hitting the delayed-ack issue
or problems with your antenna.
Change your antenna orientation so that they point in different directions.
Thanks,
Ben
On 9/25/19 6:49 AM, supp
Weeks or months or whenever I have time, and maybe sooner if someone
wants to sponsor it. Please understand I, and probably everyone else working
on OpenWRT, am busy with lots of other projects and community work often
gets pushed to the back burner.
Thanks,
Ben
On 9/23/19 8:18 AM, supp
On 9/20/19 12:55 PM, Vincent Wiemann wrote:
Hi Klevis,
have you tried it with a short distance?
If you did you should better ask Ben Greear directly.
I asked him to post publicly so that others can help answer and that my own
answers might
help someone else.
I have some patches that should
Yes, I think it is probably dynamic VLANs. And it should work with any wave
2 ath10k chipset including 9984.
I'm interested to know if it works or not.
Thanks,
Ben
On 9/11/19 1:30 PM, Carlito Nueno wrote:
Hi Ben,
I was wondering if AP-VLAN is same as dynamic VLAN.
If so, will this fe
3c9f2e914d2a5eb3a413872239045dfcca105483ba83dd9b293e6b8855fda883
firmware-5-ct-full-community-12.bin-lede.011
dcb1bd826e5e1ef266fd7ee04410b44d4474d59f6eca0cc634e6432aaf326426
firmware-5-ct-full-htt-mgt-community-12.bin-lede.011
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http
lede.010
bde9bdcb3ecad94b4f6ab679fb2e266c46bb11b2ef279c2458a98a1e8808542d
firmware-5-ct-full-htt-mgt-community-12.bin-lede.010
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openw
On 8/9/19 7:14 AM, Koen Vandeputte wrote:
On 09.08.19 15:31, Koen Vandeputte wrote:
On 09.08.19 14:48, Ben Greear wrote:
On 8/6/19 2:26 AM, Koen Vandeputte wrote:
Hi Ben,
I finally managed to get to some time to properly take a look using a simple
setup.
Attached all required files to
On 8/6/19 2:26 AM, Koen Vandeputte wrote:
Hi Ben,
I finally managed to get to some time to properly take a look using a simple
setup.
Attached all required files to simulate the issue.
I compiled the latest OpenWrt master state, (included a full wpa_supplicant and
iperf tools) and ran the
/ath10k-10.4.php#config
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 6/27/19 7:17 AM, Koen Vandeputte wrote:
On 26.06.19 18:39, Ben Greear wrote:
On 6/26/19 9:28 AM, Koen Vandeputte wrote:
On 26.06.19 18:16, Ben Greear wrote:
On 6/26/19 2:02 AM, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote
On 6/26/19 9:28 AM, Koen Vandeputte wrote:
On 26.06.19 18:16, Ben Greear wrote:
On 6/26/19 2:02 AM, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote:
On 6/24/19 8:32 AM, Koen Vandeputte wrote
On 6/26/19 2:02 AM, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote:
On 6/24/19 8:32 AM, Koen Vandeputte wrote:
Hi Ben,
Hi All,
So I'm going to give this another try ..
As the
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote:
On 6/24/19 8:32 AM, Koen Vandeputte wrote:
Hi Ben,
Hi All,
So I'm going to give this another try ..
As the IBSS functionality is heavily advertised as a delta to mainline, it
would be very nice to g
On 6/24/19 12:34 PM, Kevin 'ldir' Darbyshire-Bryant wrote:
On 24 Jun 2019, at 19:51, Ben Greear wrote:
On 6/23/19 3:33 AM, Kevin 'ldir' Darbyshire-Bryant wrote:
Unfortunately flyspray won’t let me create a task, so filing this here so it
doesn’t get lost.
Archer C7
d
testing
this type of scenario?
Thanks,
Ben
[76300.806621] ath10k_pci :00:00.0: firmware crashed! (guid n/a)
[76300.812839] ath10k_pci :00:00.0: qca988x hw2.0 target 0x4100016c chip_id
0x043202ff sub :
[76300.822239] ath10k_pci :00:00.0: kconfig debug 0 debugfs 1 t
a3848f7842c927 (HEAD -> master, origin/master)
Author: Ben Greear
Date: Thu Jun 13 08:45:12 2019 -0700
ath10k: Improve PMF/MPF mgt frame check
And add a driver for 5.2 (beta, not even tested yet) kernel.
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc htt
nity-12.bin-lede.008
4ef46b2bdd3ddc894f79da2dbf90ee04cb58781f3eb193840bd5fdb8624b447b
firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
/home/greearb/candela_html/downloads
ath10k-ct HEAD:
commit f98b6dc4d27ea2d79a1577285d1d5cb0641b3eb4 (HEAD -> master, origin/master)
Author: Ben Greear
Date: Wed Ma
On 4/23/19 11:56 PM, Petr Štetiar wrote:
Petr Štetiar [2019-04-05 18:03:11]:
Hi Ben,
Can you use gdb to print out the lines of code around that crash site in
t2h_msg_handler?
[<87622780>] ath10k_htt_t2h_msg_handler+0x27e0/0x31dc [ath10k_core]
(gdb) l *ath10k_htt_t2h_msg_handler+
On 4/15/19 7:07 AM, Koen Vandeputte wrote:
On 29.03.19 13:55, Hauke Mehrtens wrote:
On 3/29/19 1:43 PM, Ben Greear wrote:
On 03/29/2019 02:58 AM, Koen Vandeputte wrote:
On 26.03.19 19:39, Ben Greear wrote:
On 3/26/19 6:59 AM, Koen Vandeputte wrote:
On 26.03.19 14:50, Ben Greear wrote
Tom Psyborg, check the bottom of this mail, it has the patch in it.
Thanks,
Ben
On 03/25/2019 02:34 PM, Michał Kazior wrote:
On Mon, 25 Mar 2019 at 21:23, Ben Greear wrote:
On 3/25/19 1:08 PM, Michał Kazior wrote:
On Mon, 25 Mar 2019 at 16:55, Ben Greear wrote:
On 3/25/19 5:14 AM, Michał
On 4/1/19 2:07 PM, Tom Psyborg wrote:
On 01/04/2019, Ben Greear wrote:
On 4/1/19 1:32 PM, Tomislav Požega wrote:
When chip reset is done before the chip is checked if supported
there will be crash. Previous behaviour caused bootloops on
Archer C7 v1 units, this patch allows clean device boot
posted that checks the chip version
ID and so might be a good and safe fix for all chips?
If you want to put in a hack like this for a particular platform, maybe
make it specific to that one platform so you don't risk instability on
a wide range of systems?
Thanks,
Ben
Signed-off-by: Tomislav P
1f6d872f29d1635df55737458fc054adc64803638b4ad220ce0ccb13be5c0010
firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel
On 03/29/2019 02:58 AM, Koen Vandeputte wrote:
On 26.03.19 19:39, Ben Greear wrote:
On 3/26/19 6:59 AM, Koen Vandeputte wrote:
On 26.03.19 14:50, Ben Greear wrote:
On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of
On 3/26/19 6:59 AM, Koen Vandeputte wrote:
On 26.03.19 14:50, Ben Greear wrote:
On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of all issues seen
so far:
Test setup:
- Board: Mikrotik RB922
- Hardware used: on-board
On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of all issues seen
so far:
Test setup:
- Board: Mikrotik RB922
- Hardware used: on-board QCA9882 (QCA988x), Wave1 2x2 .ac
- firmware's tested: both non-HTT and HTT fla
On 03/25/2019 02:34 PM, Michał Kazior wrote:
On Mon, 25 Mar 2019 at 21:23, Ben Greear wrote:
On 3/25/19 1:08 PM, Michał Kazior wrote:
On Mon, 25 Mar 2019 at 16:55, Ben Greear wrote:
On 3/25/19 5:14 AM, Michał Kazior wrote:
On Sat, 23 Mar 2019 at 08:20, Arend Van Spriel
wrote
On 3/25/19 1:08 PM, Michał Kazior wrote:
On Mon, 25 Mar 2019 at 16:55, Ben Greear wrote:
On 3/25/19 5:14 AM, Michał Kazior wrote:
On Sat, 23 Mar 2019 at 08:20, Arend Van Spriel
wrote:
* resending with corrected email address from Kalle
i fix that
Tomislav Požega suggested and some support for
sw rxcrypt for PMF blockack frames.
https://github.com/greearb/ath10k-ct/commits/master
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing
equired
hammering registers sometimes to get things working.
The crash is related to the v1 chip. Is there a good way to detect
that this is the chip in question and only apply this work-around
for the problem chip?
Thanks,
Ben
--
Ben Greear
Candela Technol
patch to extend 'fwcfg' feature
in ath10k-ct
to support this, or just hack in a commit similar to what you did to the stock
driver if needed.
I'll very likely accept a patch that enables tweaking this based on fwcfg API.
Thanks,
Ben
--
Ben Greear
Candela Technol
I've stopped any serious development on my 4.19 kernel, and am mostly
using 4.20 now. So, might be worth moving OpenWRT ath10k-ct to use the 4.20
kernel if it is not already doing so?
Thanks,
Ben
On 3/4/19 9:03 AM, David Bauer wrote:
This backports upstream commit
34d5629 ath10k:
12.bin-lede.005
a50a5da7e1bace2ace4cf0208b884f8f0107b68321aa238f6782acb709ae
firmware-5-ct-full-htt-mgt-community-12.bin-lede.005
/home/greearb/candela_html/downloads
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing lis
08ae3fb9e27db0f095a10fbff24f87ee1a9
(Although, github says it was commited on the 11th)
Can you please post your /etc/config/wireless and try to revert the patch to
test if
this helps with the situation?
If it is indeed the patch (and not a unsupported configuration):
@Ben can you please take a
commit 2bf89e70ecd1eaf8d1c70df7d32f99d1e1c47fe3
dev-ds: Better packing of wal_vdev struct.
Thanks,
Ben
On 02/04/2019 03:11 AM, Koen Vandeputte wrote:
done & verified.
Thanks Ben!
Koen
On 03.02.19 04:27, Ben Greear wrote:
Here are the sha-sums, the 002 version change
from the bug-58 reporter!
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 12/22/2018 08:30 AM, Christian Lamparter wrote:
On Monday, December 17, 2018 11:20:41 PM CET Mathias Kresin wrote:
17/12/2018 19:05, Christian Lamparter:
On Saturday, December 15, 2018 9:10:39 PM CET Christian Lamparter wrote:
On Wednesday, November 14, 2018 8:39:22 PM CET Ben Greear
makefile and spot-check this, I'd appreciate
it.
Thanks,
Ben
988x
0080035ce21c83ec452cfb4051fe0ec5a1f6cc99c8887bc9cc0b8be54043be72
firmware-2-ct-full-community-22.bin.lede.002
30dd88647c543486166a72b3ab1b02732048f217518c4d999e94e2cb2d29feaa
firmware-2-ct-full-htt-mgt-community-22.bin.led
elpful to me because if I remove and replace a USB wireless NIC,
or reload another wifi driver,
then by default it will change name, from /kernel/debug/ieee80211/phy1 to phy2,
for instance. My software wants
the names to stay the same to make it easier to have a persistent
representation of a &
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
From: Ben Greear
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
From: Ben Greear
Us
and names are below. If someone can update the ath10k-ct
firmware makefile
in OpenWRT to use these, and do at least some minimal testing, I'd be grateful
as I do not
have time to do any real testing at this point.
Thanks,
Ben
88x
7c03642a4f342fc6f9916485c47270893cdc75b4ba2e7fcdd8fbdfa03e8c
On 12/10/18 2:23 PM, Hauke Mehrtens wrote:
On 12/10/18 10:46 PM, Ben Greear wrote:
On 12/10/18 1:35 PM, Hauke Mehrtens wrote:
---
package/kernel/ath10k-ct/Makefile | 10 +-
...h-all-IEs-for-variant-before-falling-back.patch | 8 +-
...-controlling-support-for-various
to my 4.19 ath10k-ct
driver to make
inclusion in openwrt easier?
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/op
On 11/14/2018 11:53 AM, Felix Fietkau wrote:
On 2018-11-14 20:39, Ben Greear wrote:
On 11/01/2018 03:18 AM, Felix Fietkau wrote:
On 2018-10-28 17:39, Christian Lamparter wrote:
Ben Greear reported in his patch:
|Subject: netgear r7800: Fix mac address of radios.
|
|Reloading the driver causes
On 11/01/2018 03:18 AM, Felix Fietkau wrote:
On 2018-10-28 17:39, Christian Lamparter wrote:
Ben Greear reported in his patch:
|Subject: netgear r7800: Fix mac address of radios.
|
|Reloading the driver causes the phyX to change, and that
|caused the MAC address to change.
This is because all
d probably have either more generic branding or maybe my own custom
branding.
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http://www.candelatech.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailma
o (so we can easily have a 4.19 kernel as well as
4.14, etc).
I'd also like to somehow cram backports into this same tree, but not sure how
reasonable
that is...maybe not worth the effort.
Thanks,
Ben
--
Ben Greear
Candela Technologies I
On 10/25/2018 04:11 PM, Christian Lamparter wrote:
Hello,
On Thursday, October 25, 2018 11:08:02 PM CEST gree...@candelatech.com wrote:
From: Ben Greear
Reloading the driver causes the phyX to change, and that caused
the MAC address to change. Instead, match on pci-bus which should
be
interfaces.
We can get around 900Mbps UDP download throughput on a 'perfect' setup with 3x3
9880 WLE900VX
systems and the ath10k-ct firmware.
Forcing MCS rate is not a good idea...tune antennas and/or RF environment so
that you do not have
to force MCS to get highest encoding rate.
Thanks,
Ben
web site. The
version should have '10.4b' in its name, like: 10.4b-ct-9984-xtH-011-4f5617a The older stable wave-2 ath10k-ct firmware is just '10.4'.
http://www.candelatech.com/ath10k-10.4.php
Thanks,
Ben
--
Ben Greear
Candela Technologies Inc http:/
I have fixed this in ath10k-ct repo, thanks for the bug report.
In case you are able to update OpenWRT to use the latest ath10k-ct
repo, please feel free to submit a patch. Otherwise, I'll update
OpenWRT when I have a chance to work on it again.
Thanks,
Ben
On 05/18/2018 02:34 AM,
On 05/18/2018 02:34 AM, Koen Vandeputte wrote:
Hi Ben,
I'm trying to build todays OpenWrt master with following options:
- ath10k-ct
- qca988x-ct-htt
When disabling this option (CONFIG_PACKAGE_MAC80211_DEBUGFS), I'm getting the
build errors below.
Is it *really* required to
Does anyone know what's going on with the snapshot builds? It looks like
they haven't been building since March 23!
<https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/>
-Ben
___
openwrt-devel mailing list
openwrt-devel@l
nks in advance.-
>
>
>
> Best Regards,
>
> Guillermo Nardoni
>
> ___
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
--
Ben West
b
On 01/20/2017 02:06 AM, Felix Fietkau wrote:
On 2017-01-20 11:05, Felix Fietkau wrote:
On 2017-01-20 00:14, gree...@candelatech.com wrote:
From: Ben Greear
Signed-off-by: Ben Greear
That fix has been in the tree for a few days already :)
Sorry, i meant in the LEDE tree. You could just
1 - 100 of 351 matches
Mail list logo
