On 3/26/19 6:59 AM, Koen Vandeputte wrote:

On 26.03.19 14:50, Ben Greear wrote:


On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of all issues seen 
so far:

Test setup:

- Board: Mikrotik RB922
- Hardware used: on-board QCA9882 (QCA988x),  Wave1  2x2 .ac
- firmware's tested: both non-HTT and HTT flavours for qca988x

Synopsis:
- Setting the interface in IBSS mode results in following errors and spamming
- Speed is very low (100 kbit/s) upon linking 2 devices in HT20, long GI

Hello,

Do you see those SWBA overrun messages on both systems, or just one of them?

I'll work on fixing the out-of-my-tree compile for 4.20 today, as well as do
a quick test on 4.19 to see if I see that error below.

Thanks,
Ben

Hi Ben,

A huge amount of then continuously:

I updated ath10k-ct (commit-id:  be5c21a82b15d28991500a28f7b2b6840356281f)

I fixed part of the issue with 4.20 not compiling in openwrt, but the other 
part appears to be
a backports issue, and I did not attempt to get that working.

I tested my 4.19 kernel and it had a WARN_ON about a chan-def, but I don't 
think that
is what you reported earlier...maybe it is worth trying 4.19 on the commit
above.

IBSS is flakey in that it seems sometimes I get one-way communication,
but I do not see excessive SWBA log spam.  It runs fast when it works.

I used 'open' auth, possibly things are worse with encryption.

I have some tx-path debugging I can enable to try to understand the one-way
communication issues, but I don't have time to deal with it right now.

From my IRC comments:

I tested 9880 IBSS on my 4.20 kernel, first time I associated, I got one way traffic, but after resetting a node, I see bi-dir traffic around 170Mbps one direction, 317Mbps the other (UDP)
<greearb_> I  see a few SWBA messages, but not many
<greearb_> SWBA appears to happen when WMI communication is being slow... You might could enable HTC credit logging and/or WMI logging to better understand why that is happening (credits slow to be returned, very large number of on-going WMI messages, etc)

Thanks,
Ben

--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to