wever, OI does not support AMD graphics. You will need to install a
separate graphics card, probably an Nvidia card.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discus
s/pci@0,0/pci1022,1454@8,1/pci1043,86c7@0,3:sound,dsp1
lrwxrwxrwx 1 root root 68 Sep 20 2017 audiohd:1mixer ->
../../devices/pci@0,0/pci1022,1454@8,1/pci1043,86c7@0,3:sound,mixer1
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
eport.
I've just filed Bug #16205 for the mate-screensaver time issue. I'm
not going to work on it, because I'm old and retired. Perhaps a
younger person could fix the bug.
--
-Gary Mills--refurb-
etween, if that is posible. I don't know if there is an official
spelling in Canada, or in anyplace for that matter. I certainly don't
want to impose my personal views on other people.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
_
way to add more. In short, mate-screensaver is a good
basic screensaver. People who want to use xscreensaver will have to
install it themselves, if the change suggested in the PR takes place.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
__
r computer. If you are unable to do that, the whole
thing becomes more complicated.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://open
On Mon, May 08, 2023 at 10:31:09AM -0500, Gary Mills wrote:
> Is anybody running OI on a computer that does not have a console?
> I have a system that I installed with the GUI image, and with an
> HDMI console and USB keyboard and mouse. Now I'd like to use this
> system withou
looks like VGA video to the
OS, but converts VGA text to a serial stream that goes to a dedicated
ethernet port. They work nicely for me with OI and IPMI.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openi
ly switching the KVM to a different system.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
V.
Thanks for the page. I'll make sure I get one or two of those plugs.
I expect I'll need them.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@open
ator hardware installed, with a dedicated ethernet port.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
?
Can I attach a console later, if I happen to need it?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/lis
o
the latest OI. That's what the system is running now. I used the gui
version mainly because I only know how to use the Network GUI to
configure the network. I won't need a console once the configuration
is complete. I certainly will never need the web browser.
--
-Gary
ar 4 18:30 gschemas.compiled-old
According to the date, it came from an old BE, and was not rebuilt
or installed in two updates.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindi
On Fri, Feb 17, 2023 at 07:07:38PM -0600, Gary Mills wrote:
> Whenever I tell Firefox to show me www.royalbank.com, and click on the
> Sign In box, it tells me that my tab just crashed. This behavior just
> started happening today. It happens before I get an opportunity to
> authenti
re's something different between my systems and yours
that is causing the tab crash.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://open
new and old BEs are on different systems,
with quite different browser profiles. It's unlikely that the profile
is the cause.
I'll try to use "truss -f" to see what happens just before the tab
crash.
--
-Gary Mills--refurb-
any way to get a traceback of that tab crash or to send one to a
developer?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindi
On Tue, Jul 05, 2022 at 01:10:09PM -0500, Gary Mills wrote:
>
> What's the exact command? I recall I had this problem after an
> update. The boot stopped in single-user mode. I logged in and
> deleted the bad service. Then I shut down the system and rebooted
> it. I got a
I logged in and
deleted the bad service. Then I shut down the system and rebooted
it. I got a normal boot.
This is a well-known problem with OI.
The command probably came from a web page, but I can no longer
find it.
--
-Gary Mills--refurb--Winnipeg, Manit
ing to turn off the notebook
What does "zpool status" show?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
s with both disks permanently installed
on a desktop. I don't know if it even works with USB disks.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.o
y systems no longer support BIOS downgrades.
> no luck cannot go past the
> dell screen no matter which f key I push, Rescatux is useless.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-di
system with the service metainit present. It think
> was disabled on my broken setup btw.
I have one:
$ svcs -a | grep meta
disabled Apr_23 svc:/system/metainit:default
I'm running a BE dated 2021-08-30 .
The only dependency seems to be svc:/system/identity:node .
--
ns, laptop users can leverage nwam network
> configuations."
That really means: "in an envionment where the network configuration
changes frequently".
> So that doc positions NWAM as a solution for 'laptop users'.
> Opinions may differ ...
NWAM act
v4 routing enabled enabled
IPv6 routing disabled disabled
IPv4 forwarding disabled disabled
IPv6 forwarding disabled disabled
...
--
-Gary Mills--refurb-
On Sun, Apr 10, 2022 at 09:15:00PM +0200, Andreas Wacknitz wrote:
> Am 10.04.22 um 20:53 schrieb Gary Mills:
> > Isn't there something in the P5M file that says that the
> > svc:/network/ssh:default service needs to be restarted after the
> > update?
> >
> No,
rk/ssh:default service needs to be restarted after the
update?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/ma
repl packages are not packages at
all. For example, the solaris and illumos downloads are just single
binaries that run on those platforms. They are components of
packages, not complete packages.
--
-Gary Mills--refurb--Winni
tire filesystem from a replica.
The system I used formerly, zetaback, only stored "zfs send" streams on
the backup device. That's something that's failure-prone, according to
all the ZFS documents I've read.
The only disadvantage of zrepl that I've encountered so far
OI package,
making it easy to install.
I had been using zetaback, from OmniTI. It also has an OI package.
I may continue to use that product.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindia
y restores to ZFS
filesystems.
What are you using to backup ZFS files?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.o
ing software for them that would run
> on OI?
It might already be ported to OI but just not on the USB image. I
don't know.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing li
.. | grep NEEDED
works better than ldd.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
monitors a storage device. I don't know the plumbing in detail, but I
assume that without the process, hald will not be aware of changes to
USB devices. That is the problem I'm seeing.
--
-Gary Mills--refurb-
rrent version of OI.
> It should not interfere with the mounting of USB storage
> devices.
Yes, I agree. Nevertheless, something also prevents automounting
of USB sticks. I assume there's something in common behind the two
symptoms.
--
-Gary Mills--refurb-
e
The error seems to be in the man page. The method script svc-hal
does not use any SMF properties. It only runs:
/usr/lib/hal/hald --daemon=yes
About all you can do to run the daemon with different options is to
disable the service and then run it manually.
--
-Gary Mills-
u to recover a USB keyboard if you happen to change it. Of course,
doing that is just about as drastic as rebooting.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openi
n hal (supplied by illumos) and X11
(supplied by OI).
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
driver.
I'm impressed, and also pleased.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openin
ol. This configuration does
work. Other people use different configurations that also works.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.
ler
itself can be booted either way.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
ck the man page for rtc for details. You can also look at the
file /etc/rtc_config for current time zone settings. If you change
the time zone with rtc, you should reboot immediately.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
Microsoft patents and licence costs, I would
suspect. You have to reformat those USB devices. The FAT filesystem
is the only portable filesystem between OI and Windows. You can
reformat them on Windows or OI.
--
-Gary Mills--refurb--Winnipeg, Manitob
On Sun, Mar 28, 2021 at 04:24:58PM -0500, Gary Mills wrote:
> On Sun, Mar 28, 2021 at 08:38:33PM -0700, irixuzer wrote:
> > I'm new to the list. Ive been trying to mount usb devices. After the first
> > time, which was successful, I've been getting the following:
>
/media/STORE N GO on /dev/dsk/c7t0d0p0:1
read/write/nosetuid/nodevices/hidden/nofoldcase/clamptime/noatime/timezone=21600/dev=3701190
on Sun Mar 28 21:20:50 2021
USB devices are automatically mounted under /media . You can access
them there.
To unmount them, I use the right-click menu of th
ed automatically. You don't have to do anything. The FMRI
of that service is svc:/system/dbus:default .
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@
>
> whithout this, FF will raise a assertion in JS code.
It sounds as if we need the illumos developers to make the appropriate
change to the illumos kernel or to the linker so that this setting
will not be necessary. An illumos bug report would be a good starting
point.
--
-Gary M
On Wed, Mar 03, 2021 at 07:57:39AM -0600, Gary Mills wrote:
>
> I looked around for my notes on the first install of OI on my Z400,
> but couldn't find anything. Maybe it was that easy that I didn't
> bother making notes. I do recall that only needed to follow t
ill have this disk controller
card.
The addition to /etc/driver_aliases that I made by add_drv long ago
is this line:
ahci "pci8086,2822.103c.1309.0"
It probably can be less specific.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
_
all that only needed to follow the first
part of the instructions. The main thing is the add_drv and rebuilding
the boot archive. There was only one BE, of course.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindi
fully-qualified path of prtconf, like this:
/usr/sbin/prtconf -v | less
I know that it's complicated, but it's the only way to accomodate a
broken disk controller. Also, you only have to do this once. Most
systems do not have this problem.
--
-Gary Mills--refurb-
On Tue, Mar 02, 2021 at 09:17:31AM -0500, John D Groenveld wrote:
> In message <20210302014545.ga6...@imap.fastmail.com>, Gary Mills writes:
> >These are Solaris partions, now called slices. They are within a
> >single FDISK partition. You can use the partition command wi
tall-solaris-on-a-fake-raid-a-k-a-ahciraid-sata-sas-controller/635830#635830
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org
d within
format to see the slices. You can use the fdisk command within format
to see the FDISK partitions.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
ontroller/635830#635830
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
al IP addresses.
On OI, some ethernet devices do not have a driver. That may be your
problem with the Linksys N600.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindia
ome funny things with their
BIOS. Are you saving your changes after you make them? Does the BIOS
show the new boot order after the boot fails?
Some systems will not boot from USB, but in that case they will still
boot from a CD reader. I don't think that's your problem.
--
-Gary Mills
a few things to be desired.
We also should welcome new people, not drive them away. People learn
by making mistakes. That's quite normal and usual. In fact, we need
new people. If somebody asks a question, refer them to a place where
they can find the answer. Please be toleran
ing DRM driver and thats the
> reason why you need to use vesa in first place….
Also correct. I believe that Aurélien is working on the DRM driver.
I will be happier when that is ported and working.
--
-Gary Mills--refurb-
On Sat, Jan 30, 2021 at 08:19:16AM +0200, Toomas Soome via openindiana-discuss
wrote:
>
> > On 30. Jan 2021, at 03:57, Gary Mills wrote:
> >
> > The loader works in UEFI mode, but OI does not. Usually you are
> > offered a choice at boot time. Chose BIOS mode.
>
ks in UEFI mode, but OI does not. Usually you are
offered a choice at boot time. Chose BIOS mode.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@o
.
All I ever did was to do the initial install from the live USB image,
and do updates afterwards with the pkg command.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-dis
On Sat, Jan 23, 2021 at 04:44:21PM +, Peter Tribble wrote:
> On Sat, Jan 23, 2021 at 2:22 AM Gary Mills wrote:
>
> > That's peculiar: there are two drivers attached to the same hardware
> > device. I've never seen that before.
>
> That's normal. pc
ardware
device. I've never seen that before. The first is an ethernet
driver. The second is the SATA controller driver. It has one disk.
Can you disable the ethernet in the BIOS?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
On Sat, Jan 23, 2021 at 08:29:21AM +0700, Hung Nguyen Gia via
openindiana-discuss wrote:
> Hi. Try importing your pool on FreeBSD or Linux.
The usual way is to boot the install medium on your OI system, and then
import the pool there.
--
-Gary Mills--ref
/pci@0,0/pci1022,1453@1,3/pci1b21,1062@0,1/disk@1,0
2. c5t2d0
/pci@0,0/pci1022,1453@1,3/pci1b21,1062@0,1/disk@2,0
3. c5t3d0
/pci@0,0/pci1022,1453@1,3/pci1b21,1062@0,1/disk@3,0
Specify disk (enter its number): ^D
--
-Gary Mills
. It will
be included with the full OI kernel, but perhaps not with the loader.
Selecting AHCI mode in the BIOS for the disk controller may fix the
problem. I notice when I run:
$ prtconf -D
on my system, it shows ahci as the disk contr
ter all, you only install once.
> It either bootloops just after
> zfs0 /pseudo/zfs@0
>
> or it dumps core at the first language choice screen.
> Any thoughts/suggestions?
That certainly could be a problem. Did you capture the core file
or record the traceback?
--
t assume that
> all is ok with the boot loader. It is even possible that zfs arranged to
> install the boot loader on the disk automatically.
To be sure all is okay, try booting from one disk and then the other.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada
command if you are using the whole disk. You can tell that from
`zpool status'. If you are using slices, you will need to use format
to make it the same as the other disk.
--
-Gary Mills--refurb--Winnipe
On Tue, Jan 12, 2021 at 09:34:47AM -0600, Gary Mills wrote:
> The volume on illumos-based systems is always quite low.
Here's the bug report:
https://www.illumos.org/issues/13098
--
-Gary Mills--refurb--Winnipeg, Manitoba
> $ cat /tmp/foo.au >>/dev/audio
Pulseaudio is not involved here, since you are accessing raw devices.
You could use the audioplay command to replace the second command.
I'd expect the same result, but it's worth trying.
The volume on illumos-based systems is always quit
l, I will
be uploading a newer matching repository.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
ed
# mount | grep media
# dd if=Downloads/OI-hipster-gui-20201031.usb
of=/dev/dsk/c7t0d0p0 bs=4194304
489+1 records in
489+1 records out
2052153856 bytes transferred in 404.551998 secs (4.84MB/sec)
# mount | grep media
/* Remove the USB stick */
--
-G
On Mon, Dec 14, 2020 at 04:20:49PM +, Kalle Anka via openindiana-discuss
wrote:
>
> @Gary Mills,
> the "hal service" has started and runs fine. I get the same output as you.
Okay, hal is running. That is good to know.
> However, there are several posts from Linux
in the keyboard device in my case. I
wonder if the hal service has failed in your case. Here's how it
looks to me:
jack@openindiana:/jack$ svcs -l svc:/system/hal:default
fmri svc:/system/hal:default
name Hardware Abstraction Layer daemon
enabled true
stateonline
next_
On Thu, Dec 10, 2020 at 10:56:42PM +, Kalle Anka via openindiana-discuss
wrote:
> Gary Mills,How far the boot process goes? Well, I booted into BIOS
> and it boots until X11, which will not start.
At that point, it is actually running a version of OI, coming from the
USB image.
>
le. What graphics adapter are you using?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
t Windows and an illumos distribution to run simultaneously,
you will have to use some form of virtualization. That's the only
way.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mai
m
an older update, done on 2020-07-05.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
;{printf("%s\n", $12)}' | sort | uniq -c | sort -rn
> 75750 "sys_devices"
> 173 "file_dac_search"
> 4 "proc_owner"
> 2 "file_dac_read"
>
> What has to be added to /etc/security/exec_attr.d/SOME_FILE to
ocessing errors. No output written to LANShare
> collect2: error: ld returned 1 exit status
> make: *** [Makefile:303: LANShare] Error 1
It sounds as if the application requires gcc-6, but you tried to build
it with gcc-7. Can you try gcc-6 instead?
--
-Gary Mills--refurb-
If you have done the install some time ago, `pkg update' will not
observe changes to mate_install . The only solution is to make
mate_install something that can be installed permanently. At the very
least, the gtk-backend-cups dependancies should be attached to real
packages.
--
-Gary Mills-
On Thu, Oct 15, 2020 at 10:35:37AM -0400, John D Groenveld wrote:
> In message <20201015140917.ga18...@imap.fastmail.com>, Gary Mills writes:
> >library/desktop/gtk2/gtk-backend-cups
> >library/desktop/gtk3/gtk-backend-cups
> >
> >were not installed. These
hould be installed with GTK or CUPS,
probably with CUPS.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
On Wed, Oct 14, 2020 at 08:09:03PM +0200, Andreas Wacknitz wrote:
> I have configured cups for my network printer and that one is available
> in firefox.
Thanks. I now understand that it's possible. I only need to know
what I have to do to make it work for me.
--
-commands0.5.11-2020.0.1.20084i--
print/psutils 1.17-2020.0.1.2 i--
print/qpdf6.0.0-2020.0.1.0 i--
x11/keyboard/xkbprint 1.0.5-2020.0.1.0 i--
Have I omitted a package?
ly gives me one option: print to file. How do I get Firefox to
give me another option for printing to the `xerox' queue? I only have
the one printer.
Do I need to share this printer in CUPS? Is that it? Something else?
--
-Gary Mills--refurb--Winnip
ince we alread have CUPS on OI.
I did find a ppd file that works nicely with CUPS on OI. It was on the
CD that came with the printer. It was called xpb215.ppd .
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
On Mon, Sep 28, 2020 at 08:56:27PM -0500, Gary Mills wrote:
>
> Does anyone have a ppd file for this printer that works on OI?
I found one. It was on the CD that comes with the printer, in the PS
directory. The name is xpb215.ppd . It's clearly Postscript, but
that's fine. CU
On Thu, Aug 27, 2020 at 02:27:03PM -0500, Tim Mooney via openindiana-discuss
wrote:
> In regard to: [OpenIndiana-discuss] Xerox B215 printer with CUPS, Gary...:
>
> > I do have a PPD file, Xerox_B215_Series.ppd, that I downloaded from
> > the Xerox site. The file does say t
r you.
Not too late. I haven't tried that PPD file yet. I've been working
on something else, and also trying to limit my time sitting in front
of my computer screens. So far, I'm only collecting suggestions about
my new printer. Your suggestion is valuable.
--
-Gary Mills-
but I'd like to know what it
will do with this file. Will CUPS copy this file from anywhere, even
from a temporary location? Have you done this? Did the PPD file
improve the printing? Are you actually using this printer model?
What PDL method does CUPS use for this printer?
--
-Gary Mills
t hipster-20200705-02
Unmounted successfully
root@openindiana:/# zpool export rpool
root@openindiana:/# zpool list
no pools available
root@openindiana:/# : init 5
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
ow size. It's the smaller
font that allows the width to increase to 79.
When I press the Maximize Window button in the title bar, the geometry
does increase in both dimensions. Maybe this is how Mate is supposed
to work.
> If it works you can add your other settings peu à peu.
tual frame:
> (set-frame-width (selected-frame) 80)
> (set-frame-height (selected-frame) 30)
> and press C-x C-e (for each line).
That works too. In fact, by making them 81 and 37, I can enlarge the
screen to 80x36 like I want it. When I put those two lines in my
.emacs file, nothin
behavior is
caused by something left over from the Gnome desktop. Where should I
look?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://o
conclude that the mate window
manager is constraining the window size. Is there some way I can tell
the window manager to set the default size the way I want it?
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
op
> I was thinking of using Clonezilla, but I'm not sure if that's the way to
> go here.
I'd recommend using native illumos commands instead.
--
-Gary Mills--refurb--Winnipeg, Manitoba, Canada-
___
open
1 - 100 of 711 matches
Mail list logo
