.com 8.8.8.8 (UDP
> DNS lookup) does not.
>
> On 03/28, Comète wrote:
>
>> Hi,
>>
>> I'm trying to build an IPSEC encrypted tunnel that works as a bridge. For
>> this, I use isakmpd and etherip, vether, bridge interfaces. On each VPN
>> server
>
Hi,
I run OpenBSD 6.0 GENERIC.MP#4 amd64 on a firewall and I recently discovered
lots of these messages in
dmesg:
pf: pfi_kif_unref: rules refcount <= 0
do you know what it is ?
Thanks
Morgan
Hi,
I had the same problem with 6.1 on Alix 2D13 boards, I've created a bridge0
interface with vr0, vr1, vr2 and athn0 (the wireless one configured in hostap
mode) but no ip address was given to any of the wifi connected devices by my
dhcp server.
However, all the computers linked with an ethe
28 septembre 2017 15:50 "mabi" a écrit:
> Thanks for the pointer regarding SNI not being supported in relayd. I will go
> on and find another
> solution, probably HAproxy.
>
>> Original Message
>> Subject: Re: relayd TLS load balancer for multiple websites
>> Local Time: Septe
6 octobre 2017 05:40 "Eric Johnson" a écrit:
> On Fri, 6 Oct 2017, Mihai Popescu wrote:
>
>> I'm at a small Wireless ISP in a small town and have only a Class C block
>> of addresses.
>>
>> [...]
>>
>> [...]
>>
>> Very romantic, indeed, but it has nothing to do with OpenBSD.
>> Are you seriou
Hi,
is there any rsync mirror for firmwares ?
thanks.
Morgan
2 décembre 2015 13:00 "Felipe Gomes" a écrit:
> I just
wanted to thank everyone for their feedback. Thanks a lot!
>
> You guys are
amazing.
>
> Best regards,
> Felipe Gomes
>
> On Wed, Dec 2, 2015 at 4:03
AM, Bruno Flueckiger wrote:
>
>> On 01.12.2015 16:50,
Felipe Gomes wrote:
>>
>>> Folks,
Hello,
I've tried to used the integrated webcam on my brand new Thinkpad T14 on
OpenBSD 7.3 without success. I've followed the FAQ.
The webcam seems well detected but no image is displayed...
This is what I get:
# uname -a
OpenBSD hyperion.my.domain 7.3 GENERIC#1072 amd64
# usbdevs -v
Hi,
$ video -f /dev/video0
video: ioctl VIDIOC_DQBUF: Invalid argument
the LED lights up near the camera and a black window is displayed...
I've strictly followed https://www.openbsd.org/faq/faq13.html#webcam
then to answer Crystal:
$ ffplay -f v4l2 -input_format yuyv422 -video_size 960x540
Not better with libv4l package installed...
Thanks
Morgan
Le 7 octobre 2023 15:10:18 GMT+02:00, Thomas Frohwein
a écrit :
>On Sat, Oct 07, 2023 at 12:53:12PM +0000, Comète wrote:
>> Hi,
>>
>> $ video -f /dev/video0
>> video: ioctl VIDIOC_DQBUF: Invalid argument
&g
switch it to the other and try again?
>
> -peter
>
> On 2023 Oct 07 (Sat) at 12:53:12 + (+), Comète wrote:
> :Hi,
> :
> :$ video -f /dev/video0
> :video: ioctl VIDIOC_DQBUF: Invalid argument
> :
> :the LED lights up near the camera and a black window is displa
Hello,
$ video -q -f /dev/video1
video: /dev/video1 has no usable YUV encodings
$ video -s 1920x1080 -f /dev/video1
video: /dev/video1 has no usable YUV encodings
thanks for your suggestion
Morgan
7 octobre 2023 18:56 "Marcus MERIGHI" a écrit:
> Hello,
>
> com...@geek
I thought that the webcam was broken but I've tested
it with a live Debian 12 usb key and it works.
7 octobre 2023 21:02 "Comète" a écrit:
> Hello,
>
> $ video -q -f /dev/video1
> video: /dev/video1 has no usable YUV encodings
>
> $ video -s 1920x1080 -f
encodings
>>
>> $ video -s 1920x1080 -f /dev/video1
>> video: /dev/video1 has no usable YUV encodings
>
> What does video -g -f /dev/video0 do?
>
> (The -g flag being of interest here).
>
> This error:
>
>> On 2023 Oct 07 (Sat) at 12:53:12 + (+
$ ffmpeg -f v4l2 -list_formats all -i /dev/video1
ffmpeg version 4.4.3 Copyright (c) 2000-2022 the FFmpeg developers
built with OpenBSD clang version 13.0.0
configuration: --enable-shared --arch=amd64 --cc=cc --enable-debug
--disable-stripping --disable-indev=jack --disable-outdev=sdl2
--enab
Hello,
I'm experiencing big slowdowns on a LENOVO Thinkpad T14 Gen3 when using MP
kernel (on 7.3 and 7.4) but strangely not on GENERIC.
For example, starting LibreOffice on GENERIC takes 7 seconds but 35 seconds on
MP kernel. It's even lagging when typing some text in an editor or a mail.
Switc
Hi,
Wow ! you're absolutely right ! If I unplug, no lagg anymore.
So the solution should be to apply your patch and rebuild the kernel ?
Thanks a lot !
Morgan
17 octobre 2023 14:24 "Stuart Henderson" a écrit:
> On 2023-10-16, Comète wrote:
>
>> Hello,
>>
Hi,
so I rebuild with your patch applied but it is still very slow with the bsd.mp
kernel.
Thanks for you help
Morgan
18 octobre 2023 10:43 "Stuart Henderson" a écrit:
> On 2023-10-17, Comète wrote:
>
>> Hi,
>>
>> Wow ! you're absolutely right !
Yes, we use a lot of ALIX 2D13 as routers on many sites since 2 or 3
years (nearly 20 ALIX boxes now). It works like a charm with a good
compact flash card, no problem at all ! And i've recently discovered
they even included a watchdog ;)
Morgan
Le 04/10/2013 23:45, Loïc BLOT a écrit :
Hello
I use ifstated for that. This is my config file:
init-state auto
carp_up = "carp3.link.up && carp10.link.up && carp101.link.up &&
carp100.link.up && carp254.link.up && carp2.link.up && carp7.link.up &&
carp4.link.up"
carp_down = "carp3.link.down && carp10.link.down && carp101.link.down &&
c
Take a look at this page too (https://stable.mtier.org/). This is a
great help to follow "stable" without compiling. I use it with all my
servers.
Morgan
Le 30/10/2013 03:44, David Noel a écrit :
I started playing around with FreeBSD back in the 2.2.7 days. I'd
describe myself as a casual de
Hello,
I've tried vesa too and it works but it is limited to 1024x768... if you
have any tips to allow 1440x900 with vesa, i take it...
Thanks
Morgan
Le 02/11/2013 16:10, Gilles Cafedjian a écrit :
Hello,
Indeed, switching to vesa driver in xorg.conf removed all the windows
lags.
I don't ne
Hi,
In March, i reported this bug on jme driver and hopefully Brad Smith
answered with the following patch which work nicely, many thanks to him
! Now two releases later, this patch is still not included. I sent him 2
or 3 mails to ask why but didn't get any answer.
Do you know any particular r
else {
+ IF_PREPEND(&ifp->if_snd, m_head);
+ ifp->if_flags |= IFF_OACTIVE;
}
- ifp->if_flags |= IFF_OACTIVE;
break;
}
+
Hi,
I've made some bandwidth tests (on 6.0 stable - amd64) between two APU2C
boxes connected with an Ethernet cable and an IPSEC VPN using IKEDv2. I get a
maximum bandwidth of 66 Avg Mbps when IPSEC is enable which is, I think, very
low for an AES-NI enabled processor. And about 30 seconds after t
9 novembre 2016 16:40 "Christian Weisgerber" a écrit:
>
On 2016-11-09, "Comète" wrote:
>
>> I've made some
bandwidth tests (on 6.0 stable - amd64) between two APU2C
>> boxes connected
with an Ethernet cable and an IPSEC VPN using IKEDv2. I get a
>&g
9 novembre 2016 16:40 "Stuart Henderson" a écrit:
> On
2016-11-09, =?utf-8?B?Q29tw6h0ZQ==?= wrote:
>
>> Hi,
>>
>> I've made some bandwidth tests (on 6.0 stable - amd64) between two APU2C
>>
boxes connected with an Ethernet cable and an IPSEC VPN using IKEDv2. I get a
>> maximum bandwidth of 66 A
10 novembre 2016 11:00 "Stefan Sperling" a écrit:
> On Thu,
Nov 10, 2016 at 09:00:07AM +, Comète wrote:
>
>> Oh, should I understand
that IKEv2 is unusable on production ?
>
> This question is
counter-productive because it demotivates volunteers.
My goal wasn&#
10 novembre 2016 12:50 "Stefan Sperling" a écrit:
> Yes,
that is worth trying as a workaround if you don't have
> clients that require
IKEv2. If you control both ends of the
> tunnel then there's absolutely no
reason not to try IKEv1.
>
> I have never seen such a problem with isakmpd
but I'm no
Hi,
I'm trying to run OSPFD over IPSEC with OpenBSD 6.0 stable, so I first
start looking at http://undeadly.org/cgi?action=article&sid=20131105075303
Now that etherip has it's own interface in 6.0, I tried to replace gif with
etherip like this:
On one host:
-=>> cat /etc/hostname.br
14 novembre 2016 14:50 "Remi Locherer" a écrit:
> On
2016-11-14 12:48, Comète wrote:
>
>> Hi,
>> I'm trying to run OSPFD over
IPSEC with OpenBSD 6.0 stable, so I first
>> start looking at >
http://undeadly.org/cgi?action=article&sid=20131105075303
14 novembre 2016 14:50 "Remi Locherer" a écrit:
> On
2016-11-14 12:48, Comète wrote:
>
>> Hi,
>> I'm trying to run OSPFD over
IPSEC with OpenBSD 6.0 stable, so I first
>> start looking at >
http://undeadly.org/cgi?action=article&sid=20131105075303
14 novembre 2016 22:50 "Remi Locherer" a écrit:
> On
Mon, Nov 14, 2016 at 04:50:21PM +, Comète wrote:
>
>> 14 novembre 2016
14:50 "Remi Locherer" a écrit:
>> On
>> 2016-11-14
12:48, Comète wrote:
>>
>> Hi,
>> I'm tr
14 novembre 2016 22:50 "Remi Locherer" a écrit:
> On
Mon, Nov 14, 2016 at 04:50:21PM +, Comète wrote:
>
>> 14 novembre 2016
14:50 "Remi Locherer" a écrit:
>> On
>> 2016-11-14
12:48, Comète wrote:
>>
>> Hi,
>> I'm tr
Hello,
I use route-to in my pf.conf to route packets from my LAN through 4
non-equal WAN links (multipath routing is disabled). It works nicely, but if I
try to send pings from the firewall itself through a specific WAN interface
with ping -I or traceroute -s commands, it's always the default rout
Hi,
I use OpenBSD 6.0 amd64 (stable) on a Shuttle XS35v2. I've installed
"ushare" but same problem with "minidlna" and I don't think the problem comes
from these apps... When I try to read a big file (ex.: a 1Go video) from my
DLNA player, nothing starts playing and the jme driver on the Shuttle r
9 février 2017 18:40 "Daniel Bolgheroni" a écrit:
>
On Wed, Feb 08, 2017 at 10:04:04AM +, Comète wrote:
>
>> Hi,
>>
>> I
use OpenBSD 6.0 amd64 (stable) on a Shuttle XS35v2. I've installed
>> "ushare"
but same problem with "mini
Hi,
I'm trying to build an IPSEC encrypted tunnel that works as a bridge. For
this, I use isakmpd and etherip, vether, bridge interfaces. On each VPN server
(Host A and B), I've got PF running on the external interface (em2). Both
hosts run OpenBSD 6.0 stable amd64.
Host A is my main server and ho
on top of my NATing
> traffic
between rdomains, TCP passes fine, UDP does not, though I can see requests and
replies
> moving across enc0 (DNS requests that show the answer in the tcpdump
output). So, host -T
> google.com 8.8.8.8 (TCP DNS lookup) works but host
google.com 8.8.8.8 (UDP DNS l
> On 03/28, Comète wrote:
>
>> Hi,
>>
>> I'm trying to build an IPSEC
encrypted tunnel that works as a bridge. For
>> this, I use isakmpd and
etherip, vether, bridge interfaces. On each VPN server
>> (Host A and B), I've
got PF running on the exter
2 avril 2017 11:49 "Comète" a écrit:
>> On 03/28,
Comète wrote:
>
> Hi,
>
> I'm trying to build an IPSEC encrypted tunnel
that works as a bridge. For
> this, I use isakmpd and etherip, vether, bridge
interfaces. On each VPN server
> (Host A and B), I'
21 novembre 2014 23:00 "John Merriam" a écrit:
> Hello. I am trying to write a script to check for updates to the binary
> packages by checking the output of pkg_add then sending an e-mail if
> something is found. My very simple script is this:
>
> #!/bin/ksh
>
> NEWPKGS=`pkg_add -Iusx | grep -
Hi,
I use OpenBSD 5.6 GENERIC.MP (amd64) on a Thinkpad T440. I often use the
suspend state and i've noticed that after each suspend, in the next 5 minutes
after resuming, my network interface (em0) looses connection during about 1 or
2 minutes and then reconnect and so on, many times...
As you can
29 janvier 2015 14:30 "Jonathan Gray" a écrit:
> On Thu, Jan 29, 2015 at 12:54:34PM +, Comète wrote:
>
>> Hi,
>>
>> I use OpenBSD 5.6 GENERIC.MP (amd64) on a Thinkpad T440. I often use the
>> suspend state and i've noticed that after each sus
Hi,
i've just installed the latest snapshot on this new fanless little
machine with 2 NICs (one I218-LM and another with I211 chipset) and the I211
is not detected, dmesg returning: "EEPROM Checksum is not valid". I've looked
at "man em" and saw I211 was supported.
Any idea ?
Thank you.
Morgan
Hi,
Is anybody using an USB-to-serial connection to an ALIX?
Yes i am. We have many Alix 2D13 boards that we use as routers running
OpenBSD 5.2 on many sites. I use a USB-to-serial cable to configure them
without problem but i've never used anything else than screen or
minicom. You could tr
Hello,
i own a Shuttle XS35v2 and actually run OpenBSD 5.2 amd64 (SMP) on it.
I run OpenBSD on this hardware since 4.9 and i always encountered the
following problem, sorry for the late report it took me some time to
identify it:
The NIC uses the jme driver which run in a kernel panic each t
Le 25/03/2013 05:59, Brad Smith a écrit :
On Sun, Mar 24, 2013 at 03:46:38PM +0100, Com??te wrote:
Hello,
i own a Shuttle XS35v2 and actually run OpenBSD 5.2 amd64 (SMP) on
it. I run OpenBSD on this hardware since 4.9 and i always
encountered the following problem, sorry for the late report it
Le 29/03/2013 07:40, Ted Unangst a écrit :
In the latest snapshots, I've noticed something a little strange. In
both
firefox and chrome, every once in a while a line of text will be a
little darker than usual. Like all the gray pixels that make up the
smooth
antialiased edges are black. It kind
Hi,
my tls key has no password and i already use it for other stuff, so i try to
enable TLS with relayd like this:
http protocol "http_tls" {
tls tlsv1
tls ca key "/etc/ssl/private/mydomain.org.key" password ""
tls ca cert "/etc/ssl/mydomain.org.crt"
}
relay transptls {
listen
That works ! Thanks a lot !
3 mai 2015 20:50 "mxb" a écrit:
Â
Try to
create symlink in /etc/ssl/private.
ln -s mydomain.org
(http://mydomain.org).key 1.2.3.4.key, where â1.2.3.4â is your address in
$ext_addr.
Â
//mxb
Â
Â
On 3 maj 2015, at 13:04, Comète wrote:Â
Hi,
my
tls ke
27 mars 2015 11:30 "Brad Smith" a écrit:
> On 03/27/15 06:19, Comète wrote:
>
>> Hi,
>>
>> i've just installed the latest snapshot on this new fanless little
>> machine with 2 NICs (one I218-LM and another with I211 chipset) and the I211
>> is
12 mai 2015 05:20 "Jonathan Gray" a écrit:
> On Mon, May 11, 2015 at 10:24:27PM +, Comète wrote:
>
>> 27 mars 2015 11:30 "Brad Smith" a écrit:
>>> On 03/27/15 06:19, Comète wrote:
>>>
>>>> Hi,
>>>>
>>>>
Hi,
i would like to make an internal mirror but didn't find any rsync url to
mirror firmware.openbsd.org, is there any ?
Thanks.
Morgan
26 juillet 2016 12:20 "Miles Keaton" a écrit:
> Sorry
to bother the list with this, but still stumped after two days.
>
> Trying to
switch from nginx to httpd, but there's just one thing left:
>
> Having the
webserver pass some URLs to another port:
>
> # working nginx config:
> http
{
> server
22 octobre 2014 09:30 "Mike Larkin" a écrit:
> On Fri, Sep 26, 2014 at 11:46:04AM +0400, Кирилл wrote:
>
>> Hello.
>> After apm -z and wake by wol (re0) sometimes machine becomes very slow on
>> network operations (even ssh!)
>> Help, please.
>> Here is dmesg and ifconfig:
>
> ... snip ...
>
>
22 octobre 2014 10:40 "Peter Hessler" a écrit:
> On 2014 Oct 22 (Wed) at 08:31:29 + (+), Com??te wrote:
> :22 octobre 2014 09:30 "Mike Larkin" a ??crit:
> :> On Fri, Sep 26, 2014 at 11:46:04AM +0400, wrote:
> :>
> :>> Hello.
> :>> After apm -z and wake by wol (re0) sometimes
Hi,
after reading these articles about Mtier experience
(http://www.undeadly.org/cgi?action=article&sid=20110420080633 and
http://undeadly.org/cgi?action=article&sid=20121026064602), i'm trying
to set up a server to allow any client (diskless or not) on my network
to be used as a thinclient w
Yes, i confirm that i have this problem too with vio network drivers
with proxmox VE 2.x and OpenBSD 5.3 and 5.4. Nics stop receiving and
transmitting. I also switched back to em driver.
Morgan
Le 29/12/2013 20:55, Adam Thompson a écrit :
Just an FYI at this time for anyone else searching on
Hi,
i need to script some packages install, so i tried to use pkg_add -z
option like this:
pkg_add -vzI python-idle-2
python-idle-2.7.5p0: ok
--- +python-idle-2.7.5p0 ---
If you want to use this package as your default system idle, as root
create symbolic links like so (overwr
Hello,
I tried to install OpenBSD 7.5 on a new HP Elitebook 840 G10 (UEFI capable
only) without success.
It is stuck at boot on "entry point at 0x1001000".
Even retried after a BIOS upgrade but no luck either.
I tried with a snapshot install too with the same result.
I post here what lspci ret
the system with the bsd.mp/bsd.sp kernel?
>
> Best regards,
> Sven
>
> On 5/23/24 22:40, Comète wrote:
>
>> Hello,
>> I tried to install OpenBSD 7.5 on a new HP Elitebook 840 G10 (UEFI capable
>> only) without success.
>> It is stuck at boot on "ent
Hello,
This is a link to a screenshot, I can't copy/paste at this step:
https://ibb.co/tpr8zBz
Thanks a lot !
Comete
Le 24 mai 2024 20:38:45 GMT+02:00, Mike Larkin a écrit :
>On Fri, May 24, 2024 at 06:59:24AM +, Comète wrote:
>> Thanks Sven,
>>
>> I can'
uld be able to do it this way:
>
> boot> /7.5/amd64/bsd
>
> If it makes it past the stage where the install kernel fails, it'll
> panic at the lack of root, which is expected.
>
> Might be a pointless move but it might help eliminate the install
> kernel as a
Hello,
finally i'm still stuck on this problem. Are there any other tests I can do ?
Thank you
Comete
27 mai 2024 21:24 "Comète" a écrit:
> Hi Aaron,
>
> thanks for the idea. Booting the regular kernel as suggested, has the same
> result:
> it freezes on
Hi,
thanks Philip for your diagnostic. I will be available to make some tests when
someone will have time to spend on it.
Thanks a lot.
Regards,
Comete
4 juillet 2024 07:14 "Philip Guenther" a écrit:
> On Mon, Jun 24, 2024 at 2:16 AM Comète wrote:
>
>> finally i
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly some
system crashes (once a week or two weeks). The system always displays
the same message:
uvm_fault (0xd080d9e00x0,0,1) -> e
kernel: page fault trap, c
Well i have tested the RAM with memtest, no error.
maybe another idea ?
Thanks
Daniel Gracia Garallar a C)crit :
Oh and maybe bad RAM; I've hit some nasty errors with these faulty
DIMMs... :/
ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant
same problem for me too.
Michiel van Baak a icrit :
> On 10:36, Sun 05 Jul 09, stan wrote:
>> I am trying to get OpenBSD 4.5 working as a guest OS using KVM on Linux. I
>> have been able to get 4.4 to install and run fine, but 4.5 never gives me a
>> login prompt. The last message I see is about s
Hi,
i would like to use the ACLs in CUPS to give access to users and groups
from a LDAP directory. I already did this on a linux machine with
pam-ldap and nss-ldap, but on OpenBSD, pam and nss are not supported. So
i wonder if it was possible to do this another way ?
thanks
Comete
Hi,
i'm trying to recompile SQUID 2.6-STABLE13 port for OpenBSD 4.2
with LDAP auth helpers and ldap_group helpers support and get errors
during the compilation. This is what i modified in the Makefile:
...
CONFIGURE_ARGS+=--datadir="${PREFIX}/share/squid" \
--enable-auth="basic di
Thanks but that doesn't help me, could you explain please ?
Alexander Schrijver a icrit :
openldap includes are installed in /usr/local/include/ and libraries
in /usr/local/lib/.
Hi,
i run an OpenBSD 4.3 firewall with 3 network interfaces : 1 LAN, 1 WAN
and 1 DMZ
I use ftp-proxy to allow ftp client connexions from my LAN and it works
well. On my DMZ, i have multiple servers (web,dns,smtp,etc...) and they
have all one different public IP. So, i use binat rules to nat them
e
Indeed, this doesn't work either. I think i will try what Stuart
proposed whereas i don't really see how to do...
thanks
Calomel a icrit :
See if this works for you. Using the ftp proxy with binat probably
will not work. Lets say 100.20.30.40 is the external ip.
# cat /etc/rc.local
/usr/sb
This was a good advice Stuart ! Thanks !
I used a pair of nat and rdr rule to replace my binat rule and it works
as expected !
thanks again guys.
Stuart Henderson a icrit :
On 2008-09-30, Comhte <[EMAIL PROTECTED]> wrote:
I use ftp-proxy to allow ftp client connexions from my LAN and it works
Ok, so does it mean that -stable or -release are useless ??? and people
buy useless CDs every 6 monthes ? I can't believe it.
I really don't understand why these fixes are not provided anymore.
i don't want to go back to Debian... ;)
Stijn a icrit :
Check the archives. This question has been a
uh uh ! Don't be so nervous guy !
I just would like to know the reason why these fixes weren't provided. I
can understand now as you tell me (so gently...) that there isn't enough
people to work on it. Ok i know the time such projects can take and it
would have been easier to tell things like th
So i make a proposal to avoid "clueless guy" like me to ask this
question which seems to cause so many troubles:
What do you think about posting a message on this page:
http://www.openbsd.org/pkg-stable.html
which could say in a better english as mine :) :
"OpenBSD -stable packages are not mainta
Hi,
In 4.9, i used to start dhcrelay using /etc/rc.local like this:
/usr/sbin/dhcrelay -i vlan2 10.0.45.11
/usr/sbin/dhcrelay -i vlan5 10.0.45.11
/usr/sbin/dhcrelay -i vlan7 10.0.45.11
/usr/sbin/dhcrelay -i vlan100 10.11.1.8 10.22.1.8
/usr/sbin/dhcrelay -i vlan101 10.11.1.8 10.22.1.8
but now wi
On Wed, Nov 09, 2011 at 05:36:54PM +0100, Comhte wrote:
Hi,
In 4.9, i used to start dhcrelay using /etc/rc.local like this:
/usr/sbin/dhcrelay -i vlan2 10.0.45.11
/usr/sbin/dhcrelay -i vlan5 10.0.45.11
/usr/sbin/dhcrelay -i vlan7 10.0.45.11
/usr/sbin/dhcrelay -i vlan100 10.11.1.8 10.22.1.8
/usr
Same error message since one week on an old 4.6 install. But i didn't
find the origin yet...
Le 14/11/2011 10:13, Manuel Giraud a C)crit :
Hi,
I've just set up a mail server with 5.0. I have put spamd in front (in
default greylisting mode). It works great following the man pages but
when I act
Thanks for the tips but does anyone know where this problem come from ?
Le 14/11/2011 10:13, Manuel Giraud a C)crit :
Hi,
I've just set up a mail server with 5.0. I have put spamd in front (in
default greylisting mode). It works great following the man pages but
when I activate the spamd-setup
Without the need of a web interface, if your goal is to automate some
boring tasks, you can have a look at Fabric (http://fabfile.org). I use
it with a lot of servers everyday and it's very easy to script whatever
you want.
Morgan
Le 15/06/2011 20:36, Jean-Frangois SIMON a icrit :
Hi,
I hav
83 matches
Mail list logo
