On Jan 12 19:15:46, Markus Hennecke wrote:
> If I remember correctly the alix bios use a baudrate different from 9600
> baud. Are you by chance connecting to the board with another baud rate?
> If this is the case just restart the session with 9600 baud and you
> should be able to boot the syste
I've always had consistent success with a crossover cable and ssh. Serial
connections with Wrap and Alix can be hit and miss and it's hard to see
why it worked yesterday but not today. You may consider spending the
pesos on the cable instead of coffee, cigarettes or aspirin.
Are you in BA? What
On Jan 12, 2008 10:44 PM, Limaunion <[EMAIL PROTECTED]> wrote:
> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
Also note that you are using a kernel that is over four months old and
it obviously does not yet contain the extensions that were added to
glxpcib(4) to support the hardware ti
Limaunion wrote:
Rolf Sommerhalder wrote:
Any other suggestion ?
It looks as if your ALIX booted through all stages and successfully
loaded the kernel /bsd, but fails to start this kernel. Maybe check
out http://www.openbsd.org/faq/faq14.html#Boot386 , notably item 4.,
to help with diagnosis an
On Jan 12, 2008 10:44 PM, Limaunion <[EMAIL PROTECTED]> wrote:
> Well, I finally got it booting. As suggested I upgraded the BIOS to
> release 0.99 and configured the device to work at 9k6bps.
> Now the problem is that it gets stuck just before having the login
> prompt, after printing the date and
Rolf Sommerhalder wrote:
Any other suggestion ?
It looks as if your ALIX booted through all stages and successfully
loaded the kernel /bsd, but fails to start this kernel. Maybe check
out http://www.openbsd.org/faq/faq14.html#Boot386 , notably item 4.,
to help with diagnosis and repair.
Are you
> Any other suggestion ?
It looks as if your ALIX booted through all stages and successfully
loaded the kernel /bsd, but fails to start this kernel. Maybe check
out http://www.openbsd.org/faq/faq14.html#Boot386 , notably item 4.,
to help with diagnosis and repair.
Are you sure that the kernel /bsd
Markus Hennecke wrote:
On Sat, 12 Jan 2008, Limaunion wrote:
Hi there, I just got an ALIX2C2 and installed a 1GB CF with an already
working OpenBSD 4.2 system. For some reason I get this after powering up
the unit:
PC Engines ALIX.2 v0.98
640 KB Base Memory
261120 KB Extended Memory
01F0 M
On Sat, 12 Jan 2008, Limaunion wrote:
Hi there, I just got an ALIX2C2 and installed a 1GB CF with an already
working OpenBSD 4.2 system. For some reason I get this after powering up
the unit:
PC Engines ALIX.2 v0.98
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 044A CF CARD 1GB
P
Hi there, I just got an ALIX2C2 and installed a 1GB CF with an already
working OpenBSD 4.2 system. For some reason I get this after powering up
the unit:
PC Engines ALIX.2 v0.98
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 044A CF CARD 1GB
Phys C/H/S 1966/16/63 Log C/H/S 983/32/63
10 matches
Mail list logo
