> started filing PR's for RAIDframe stuff in OpenBSD -- there have been
> a lot of changes/fixes to RAIDframe in the last 5 years that aren't
I have $100 via Paypal for the person who commits RAID enabled boot
blocks for Sparc[64] and i386/amd64 on OpenBSD.
I have an $100 additional via Paypal
On 12/7/05, Daniel Ouellet <[EMAIL PROTECTED]> wrote:
> Hmmm,
>
> May be I don't understand the differences what so ever, but shouldn't
> the dmesg of the regular bsd and bsd.mp detect the same hardware?
>
> Here is the dmesg from the bsd.mp one.
the interrupt routing code is pretty much totally d
try this, i think it covers the chroot case better.
Index: res_init.c
===
RCS file: /cvs/src/lib/libc/net/res_init.c,v
retrieving revision 1.33
diff -u -r1.33 res_init.c
--- res_init.c 2005/08/06 20:30:04 1.33
+++ res_init.c 20
> There is the (expensive) Real Weasel for x86 kit, Dell's crappy lights
DRAC/4 isn't that bad >:}
You can always use serial console redirection on the 1850s/2850s; it
works well until OS boot (BIOS menus works, RAID, IPMI menus), when you
have to setup serial console redirection on the boot load
Craig,
On 08/12/2005, at 11:05 AM, Craig Skinner wrote:
I'm going to be buying some hardware for offiste colos next year
and was
thinking of getting some used Netras.
The Sparc64 support page: http://www.openbsd.org/sparc64.html
Shows various Netra machines as being supported.
Shane
Hmmm,
May be I don't understand the differences what so ever, but shouldn't
the dmesg of the regular bsd and bsd.mp detect the same hardware?
Here is the dmesg from the bsd.mp one.
I just find it interesting and curious at the same time.
OpenBSD 3.8 (GENERIC.MP) #504: Sat Sep 10 16:02:38 M
> if ((status & (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) ==
>^^
> (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK))
> ^
>
> It appears that the loop will alw
Craig Skinner wrote:
There is the (expensive) Real Weasel for x86 kit, Dell's crappy lights
out card isn't a reliable option.
Compaq's remote card isn't bad, it works in any ATX PC and they're like
$5-10 on eBay. The remote console requires Java on the controlling
machine which makes it a h
Hi,
Not sure if anyone was able to see the PCI-x slot in the HP 145 G2 yet.
I did research the archive before and it did say the PCI-Express wasn't
available and as such the SCSI version wouldn't work as that's where the
SCSI controller was connecting.
I disable the PCI-Express in BIOS and I
Thanks you all for your time and cooperation.
I would like a small router, with a single hard disk and a wireless
device. Which would it be the perfect soekris models? What you are you
running?
Thanks once more.
2005/12/7, Stuart Henderson <[EMAIL PROTECTED]>:
> --On 07 December 2005 16:40 -0800
In trying to upgrade to 3.8, the rl driver complains
from rl_diag that loopback failed. There is a bit of code
that doesn't make sense to me:
* Wait for it to propagate through the chip */
DELAY(10);
for (i = 0; i < RL_TIMEOUT; i++) {
status = CSR_READ_2(sc, R
--On 07 December 2005 16:40 -0800, [EMAIL PROTECTED] wrote:
If there is anyone here running such hardware, i would like to hear
which harddisk and wireless (as also the anthena if it came apart)
device are you running.
I'm running a net4801, with a Nikon 16MB starter CF card and a DLink
PCI p
> If there is anyone here running such hardware, i would like to hear
> which harddisk and wireless (as also the anthena if it came apart)
> device are you running.
I'm running a net4801, with a Nikon 16MB starter CF card and a DLink PCI
prism based card. I do not belive the net4526 has any disk
On Wed, Dec 07, 2005 at 11:40:28AM -0700, Theo de Raadt wrote:
>
> Want to be clear with Sun?
>
> They are closed until we there is complete Schizo host-bridge documentation
> available for everyone.
>
So would it be wise to avoid Sun Sparc kit?
I'm going to be buying some hardware for offiste
viq wrote:
On Wednesday 07 December 2005 23:30, Spruell, Darren-Perot wrote:
In the time everyone's been discussing this I installed the packages from
FTP; why are we messing with ports and FLAVORs?
Some people prefer to build stuff from source on their own machine, instead of
having binar
On Wed, Dec 07, 2005 at 02:58:34PM -0800, Joe Advisor wrote:
> http://marc.theaimsgroup.com/?l=openbsd-misc&m=110931013806157&w=2
Some stuff, which should be included in 3.8-release, has been committed
to help in this regard. It doesn't cover all cases, though.
-p.
Dear gentleman,
i am planning a single router for my 5 boxes network (ont incluind the
router). I am thinking using Soekris for such a task. I was thinking
on net4526 model (http://www.soekris.com/net4526.htm).
If there is anyone here running such hardware, i would like to hear
which harddisk and
I found this posting:
http://marc.theaimsgroup.com/?l=openbsd-misc&m=110931013806157&w=2
That says:
>
> Does anyone have creative ways to deal with this?
I'm not sure it's going to
> be possible to deal with this with hotplugd, but if
there's any ideas please
> share them.
when you get a ``det
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> # /usr/local/mysql/bin/mysql -V
> /usr/local/mysql/bin/mysql: can't load library
> '../libmysql/.libs/libmysqlclient.so.15.0'
This means that the .so from the build directory is hardcoded into the
executable - most likely an error in the build scrip
On Wednesday 07 December 2005 23:30, Spruell, Darren-Perot wrote:
> In the time everyone's been discussing this I installed the packages from
> FTP; why are we messing with ports and FLAVORs?
Some people prefer to build stuff from source on their own machine, instead of
having binary packages fr
From: viq [mailto:[EMAIL PROTECTED]
> > Is there a way around this so the full install c/w plugins,
> etc all work
> > in a chrooted environment?
>
> Ah. I don't have yet that much experience with ports, and
> didn't play with
> nagios, so i'm afraid the help will have to come from someone
> e
Hello
Ever since I started pushing over 80+ mbits continously on our em0 we
are seeing "em0: watchdog timeout -- resetting" eachoter day on our em0
interfaces that are
"em0 at pci1 dev 28 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00:
irq 11, address: 00:30:48:81:b4:7c"
but not on our :
"em1 a
On Wednesday 07 December 2005 19:01, Simon H wrote:
> viq wrote:
> > cd /usr/ports/net/nagios/ && FLAVOR=chroot make install clean-depends
> > that should do it ;)
>
> Thanks viq, but this still fails on the plugins install as they dont
> support chroot flavor aparently:
>
> Fatal: Unknown flavor:
> > # restore -rvs 1 -f /dev/rwd2a
> > Verify tape and initialize maps
> > restore: /dev/rwd2a: Device not configured
> > # restore -rvs 1 -f /dev/rwd2c
> > Verify tape and initialize maps
> > Tape block size is 32
> > restore: Tape is not a dump tape
> >
> > It is, quite possible that it didn't wo
On Wed, 7 Dec 2005, Whyzzi wrote:
> Well, I accidentally disklabeled it. I was playing with ccd recently
> and stupidly began ccd type recovery on a dump copy hard drive by
> entering disklabel and changing the unused wd2a partition into a
> 4.2BSD partition, offset of course by 63, writing to the
On 12/7/05, Otto Moerbeek <[EMAIL PROTECTED]> wrote:
> > i made some changes to the resolver, though they should deal with this
> > situation (unless there's a bug).
>
> I only grepped through the code of openser briefly, but this scenario
> seems likely.
>
> 1. App calls res_init() which calls _re
On Wed, 7 Dec 2005, Ted Unangst wrote:
> On 12/7/05, Federico Giannici <[EMAIL PROTECTED]> wrote:
> > > May it be relevant that the program is run chrootted???
> > >
> > > I'm going to make some tests, as soon as I have the time...
> >
> > Got it!
> > I simply copied "/etc/resolv.conf" to the chr
> I understand this and have tried just installing the chroot package
> manually also but nothing seems to be going in the right place
> (/var/www/nagios is empty after adding the chrooted package). I'm doing
> this in a VM so I'm reverting back to a snapshot which is just after
> updating the por
> > I remember reading about the issue with UltraSparc documentation. Derek
> > Warren has raised teh point in a blog comment on John Clingan's blog here.
> >
> > http://blogs.sun.com/roller/page/jclingan?entry=what_do_you_think_of#comments
>
> We don't need processor docs. That stuff is trivial
> I remember reading about the issue with UltraSparc documentation. Derek
> Warren has raised teh point in a blog comment on John Clingan's blog here.
>
> http://blogs.sun.com/roller/page/jclingan?entry=what_do_you_think_of#comments
We don't need processor docs. That stuff is trivial.
We need *
Stuart Henderson wrote:
--On 07 December 2005 16:52 +, Simon H wrote:
Thanks for this Stuart. I tried it withe right way from the man page
and it failed because the plugins dont support chroot flavor.
Plugins and the main software are in subdirectories
(/usr/ports/net/nagios/nagios & /
I remember reading about the issue with UltraSparc documentation. Derek
Warren has raised teh point in a blog comment on John Clingan's blog here.
http://blogs.sun.com/roller/page/jclingan?entry=what_do_you_think_of#comments
HTH
Dave Diller writes:
>
> >
> > Oh... and from the "obivous bugs" department: In rf_openbsdkintf.c
> >
> > case RAIDFRAME_GET_COMPONENT_LABEL:
> >
> > there is a:
> >
> > RF_Free( clabel, sizeof(RF_ComponentLabel_t));
> >
> > missing before the:
> >
> > return(EINVAL);
> >
> > But that won't hel
viq wrote:
cd /usr/ports/net/nagios/ && FLAVOR=chroot make install clean-depends
that should do it ;)
Thanks viq, but this still fails on the plugins install as they dont
support chroot flavor aparently:
Fatal: Unknown flavor: chroot (in net/nagios/plugins)
(Possible flavors are: no_db
--On 07 December 2005 16:52 +, Simon H wrote:
Thanks for this Stuart. I tried it withe right way from the man page
and it failed because the plugins dont support chroot flavor.
Plugins and the main software are in subdirectories
(/usr/ports/net/nagios/nagios & /usr/ports/net/nagios/plugi
On 12/7/05, Federico Giannici <[EMAIL PROTECTED]> wrote:
> > May it be relevant that the program is run chrootted???
> >
> > I'm going to make some tests, as soon as I have the time...
>
> Got it!
> I simply copied "/etc/resolv.conf" to the chrootted path and the
> problem disappeared.
>
> So some
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Today Otto Moerbeek contributed the following:
On Wed, 7 Dec 2005, Denny White wrote:
I was hoping someone could shed some light with some good
links, sample configurations, etc., that might help me
with the following. Not looking for someone to
> Oh... and from the "obivous bugs" department: In rf_openbsdkintf.c
>
> case RAIDFRAME_GET_COMPONENT_LABEL:
>
> there is a:
>
> RF_Free( clabel, sizeof(RF_ComponentLabel_t));
>
> missing before the:
>
> return(EINVAL);
>
> But that won't help with the problem your describing... (just noticed
>
Well, I accidentally disklabeled it. I was playing with ccd recently
and stupidly began ccd type recovery on a dump copy hard drive by
entering disklabel and changing the unused wd2a partition into a
4.2BSD partition, offset of course by 63, writing to the disklabel and
returning to the command pro
cd /usr/ports/net/nagios/ && FLAVOR=chroot make install clean-depends
that should do it ;)
--
viq
--
INTERIA.PL | Kliknij po wiecej >>> http://link.interia.pl/f18c1
Dave Diller writes:
>
> Here's what's been changed in the kernel not a lot. I don't understand why
> it would panic on a simple reconstruct command.
I might be able to understand, but my crystal ball is at the
cleaners, and I can't guess what your panic message looked like, nor
what the tra
Has anyone gotten X working on a Dell Optiplex GX270? Seems as though I can
startx(1) but the screen is extremely garbled. Trying to run any
configuration utility doesn't seem to do any good either. I've bumped up the
amount of RAM on the card from 1MB to 8MB in the bios, but it still doesn't
work.
Stuart Henderson wrote:
--On 07 December 2005 16:12 +, Simon H wrote:
===> Installing nagios-2.0b4p0-chroot from
/usr/ports/packages/i386/all/nagios-2.0b4p0-chroot.tgz
Can't install nagios-2.0b4p0-chroot because of conflicts
(nagios-2.0b4p0)
Looks like you've already got the non-chroot
Federico Giannici wrote:
Otto Moerbeek wrote:
On Tue, 6 Dec 2005, Federico Giannici wrote:
Since I upgraded an OpenBSD/amd64 3.7 to 3.8 (following instructions
in the
"Upgrade Guide") sometimes gethostbyname() returns NULL with h_errno
equal to
-1 ("Resolver internal error").
What is th
Otto Moerbeek wrote:
On Tue, 6 Dec 2005, Federico Giannici wrote:
Since I upgraded an OpenBSD/amd64 3.7 to 3.8 (following instructions in the
"Upgrade Guide") sometimes gethostbyname() returns NULL with h_errno equal to
-1 ("Resolver internal error").
What is the value of errno?
errno is 2
--On 07 December 2005 16:12 +, Simon H wrote:
===> Installing nagios-2.0b4p0-chroot from
/usr/ports/packages/i386/all/nagios-2.0b4p0-chroot.tgz
Can't install nagios-2.0b4p0-chroot because of conflicts
(nagios-2.0b4p0)
Looks like you've already got the non-chroot flavour installed,
pkg_de
> i just fixed this.
> jmc
>
>
Thanks you very much, I have just seen the change on the OpenBSD CVS WEB
interface.
Ramiro
Hi all
I've tried installing the Nagios (2.0b4p0) port chrooted but I get the
following error when it comes to the last stage of the install:
===> Installing nagios-2.0b4p0-chroot from
/usr/ports/packages/i386/all/nagios-2.0b4p0-chroot.tgz
Can't install nagios-2.0b4p0-chroot because of conf
I had a simple RAID1 system up and running for the first time yesterday on i386
3.8, but now after testing failure mode, I can't get things unwedged. It's
quite possible I wedged it worse while messing with it after the failure, so
I'm OK with starting the build over (no data yet) - but I can't ge
[EMAIL PROTECTED] wrote:
> On Mon, 5 Dec 2005 10:40:31 -0500 (EST), Brian A. Seklecki wrote:
>
>> All:
>>
...
>> Even if other hosts receive a packet and reply to it, they won't be
>> able to ARP for it, and if they could, the original OpenBSD box will
>> drop the reply with destination host/netw
2005/12/7, Steve Welham <[EMAIL PROTECTED]>:
> > I tried to connect the cable for the internet directly to one
> > of the client machines behind the firewall (Debian GNU/Linux
> > 3.1) and the site loads perfectly, so I came to the
> > conclusion that my PF rules are blocking the packets. So, I
> >
2005/12/7, Stuart Henderson <[EMAIL PROTECTED]>:
> >> Your test with 'telnet' gives small enough packets that it probably
> >> won't be affected by PMTU problems.
> >
> > The conclusion that my problem is not PMTU related did not come
> > from the telnet test. From what I've read on this, I think t
Your test with 'telnet' gives small enough packets that it probably
won't be affected by PMTU problems.
The conclusion that my problem is not PMTU related did not come
from the telnet test. From what I've read on this, I think that
descreasing the mtu on my side enough should remove the problem
> I tried to connect the cable for the internet directly to one
> of the client machines behind the firewall (Debian GNU/Linux
> 3.1) and the site loads perfectly, so I came to the
> conclusion that my PF rules are blocking the packets. So, I
> left a minimal PF setup (pass all keep state + NAT
2005/12/7, Stuart Henderson <[EMAIL PROTECTED]>:
> --On 07 December 2005 12:33 +0200, Alexander Iliev wrote:
>
> > So far so good - the setup works very well with just one problem. My
> > ISP passes the traffic for two certain sites through a transparent
> > proxy. I reached to this conclusion due
--On 07 December 2005 12:33 +0200, Alexander Iliev wrote:
So far so good - the setup works very well with just one problem. My
ISP passes the traffic for two certain sites through a transparent
proxy. I reached to this conclusion due to the following:
It may be that the site is using Squid as
--On 07 December 2005 11:13 +0100, [EMAIL PROTECTED] wrote:
My soekris boots on a read-only flashcard on which OpenBSD 3.7 has
been pushed using flashdist.
You're using a custom kernel which probably (given that it says
'net4801') doesn't support cardbus. Try GENERIC.
On Tue, Dec 06, 2005 at 07:06:15PM -0800, Jacob Meuser wrote:
>
> yes, CARD_ is necessary. how to put that in the manpage in a nice
> format, well, I was hoping you had some input on that. simply
> prepending CARD_ to the names in the table will put some characters
> in the table beyond the 80 c
Hello.
I plugged an Elan P111 cardbus adapter (PCI to PCMCIA adapter card) in my
Soekris net4801, and can't have the card working.
( http://www.elandigitalsystems.com/adapter/p111.php )
My soekris boots on a read-only flashcard on which OpenBSD 3.7 has been pushed
using flashdist.
I joi
On Wed, 7 Dec 2005 00:13:10 -0700, Josh Tolley <[EMAIL PROTECTED]>
wrote:
>On 12/5/05, J.C. Roberts <[EMAIL PROTECTED]> wrote:
>> On Sun, 4 Dec 2005 21:57:15 -0700, Josh Tolley <[EMAIL PROTECTED]>
>> wrote:
>>
>> >OpenBSD is written for uses
>> >where freedom, stability, adherence to standards, an
Hi there.
First I want to state that I don't claim the problem I'm describing
below to be OpenBSD problem. It looks to me like a problem in the
particular set of setups between me, my ISP and the problem site.
Now, to the problem.
I'm using OpenBSD 3.8-release box as a router between a private n
On 12/7/05, Joachim Schipper <[EMAIL PROTECTED]> wrote:
>
> On Wed, Dec 07, 2005 at 09:09:02AM +0100, Ramiro Aceves wrote:
> > > yes, CARD_ is necessary. how to put that in the manpage in a nice
> > > format, well, I was hoping you had some input on that. simply
> > > prepending CARD_ to the name
On Wed, 7 Dec 2005, Denny White wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
>
> I was hoping someone could shed some light with some good
> links, sample configurations, etc., that might help me
> with the following. Not looking for someone to "fix it"
> for me or anything like th
On Wed, Dec 07, 2005 at 09:09:02AM +0100, Ramiro Aceves wrote:
> > yes, CARD_ is necessary. how to put that in the manpage in a nice
> > format, well, I was hoping you had some input on that. simply
> > prepending CARD_ to the names in the table will put some characters
> > in the table beyond th
> yes, CARD_ is necessary. how to put that in the manpage in a nice
> format, well, I was hoping you had some input on that. simply
> prepending CARD_ to the names in the table will put some characters
> in the table beyond the 80 character limit (unless the table is
> shifted to the left a bit,
65 matches
Mail list logo
