Hmmm,
May be I don't understand the differences what so ever, but shouldn't
the dmesg of the regular bsd and bsd.mp detect the same hardware?
Here is the dmesg from the bsd.mp one.
I just find it interesting and curious at the same time.
OpenBSD 3.8 (GENERIC.MP) #504: Sat Sep 10 16:02:38 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146140160 (2095840K)
avail mem = 1835593728 (1792572K)
using 22937 buffers containing 214822912 bytes (209788K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (AMD HAMMER )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 252, 2612.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200925956Hz
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 128 is type PCI
mpbios: bus 129 is type PCI
mpbios: bus 130 is type PCI
mpbios: bus 135 is type PCI
mpbios: bus 140 is type ISA
ioapic0 at mainbus0 apid 1: pa 0xffff80000373ff24, version 11, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xffff80000373fe24, version 11, 7 pins
ioapic2 at mainbus0 apid 3: pa 0xffff80000373fc24, version 11, 7 pins
mpbios: can't find ioapic 4
mpbios: can't find ioapic 4
mpbios: can't find ioapic 4
mpbios: can't find ioapic 4
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: apic 1 int
10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: apic 1 int
11 (irq 11)
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xa3: DMA
pciide1: using apic 1 int 10 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 1 int 11 (irq 11) address 00:15:60:96:f3:f5
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 1 int 10 (irq 10) address 00:15:60:96:f3:f4
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
