Hi,
Not sure if anyone was able to see the PCI-x slot in the HP 145 G2 yet.
I did research the archive before and it did say the PCI-Express wasn't
available and as such the SCSI version wouldn't work as that's where the
SCSI controller was connecting.
I disable the PCI-Express in BIOS and I install an Intel PRO/1000 MT
Quad in the PCI-x slot hoping to have the Ethernet ports available, even
if I know that card wasn't the best one for now, until I can find a good
quad SK card.
Didn't see DMESG before, so I couldn't really know. So, got one server
and tested it. Now, oh well.
Anyone knows if that might be changing soon. Not a huge dead if not, I
will recycle that server else where and then try the IBM eServer 326.
Anyone knows if that PCI is available in that one? As for the Sun x2100,
the two on board Ethernet ports are not available yet, so not an option.
I didn't try the Sun X4100 yet, so I don't know. Anyone have feedback on
that one?
Also, on the HP, I make sure I have the latest BIOS. 2.14 from October
20, 2005.
Oh well, sometime testing can be a bit expensive. I haven't tried
current yet on that box, tomorrow most likely.
Anyway, here is the DMESG for that server in case any good sole out
there may have an idea.
Many thanks.
Daniel
OpenBSD 3.8 (GENERIC) #247: Sat Sep 10 15:53:26 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2146140160 (2095840K)
avail mem = 1835712512 (1792688K)
using 22937 buffers containing 214822912 bytes (209788K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 252, 2612.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: irq 11
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xa3: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 11 address 00:15:60:96:f3:f5
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 10 address 00:15:60:96:f3:f4
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
