Hello.
I plugged an Elan P111 cardbus adapter (PCI to PCMCIA adapter card) in my Soekris net4801, and can't have the card working. ( http://www.elandigitalsystems.com/adapter/p111.php ) My soekris boots on a read-only flashcard on which OpenBSD 3.7 has been pushed using flashdist. I joigned below the dmesg. I've been searching in the newsgroups for about a week and did not find anything about my problem. I tried to disable pcibios (boot -c, config -ef), this did not help (which is not surprising considering my box does'nt seem to have the driver installed). What is surprising me is that I'm sure I have seen on internet some dmesg displays telling that a "ENE CB-1410 CardBus" device was properly installed on the machine. The ELAN P111 is supported on different linux distributions: http://www.elandigitalsystems.com/support/pfaq/plinux.php , what gives me some hope about the possibility to have it working properly. Now my two questions: 1- The ENE 1410 is a universal cardbus controller (the doc says "Intel 82365 compatible register set"). I guess you support it but do I guess well ? If not which replacement cardbus adapter PCI card do you recommend? 2- Did anybody struggle about this issue and could help me? Thanks to you all and best regards. F. Billes. ========================================================================== dmesg ========================================================================== OpenBSD 3.7 (NET4801) #0: Sat Apr 9 06:02:39 CEST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NET4801 cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133799936 (130664K) avail mem = 119463936 (116664K) using 1658 buffers containing 6791168 bytes (6632K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00 sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c4:f3:6c nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c4:f3:6d nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c4:f3:6e nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 ===================================================================== <problem> ===================================================================== "ENE CB-1410 CardBus" rev 0x01 at pci0 dev 10 function 0 not configured ===================================================================== </problem> ===================================================================== pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00 "NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <CF-ATA> wd0: 1-sector PIO, LBA, 244MB, 500736 sectors wd0(pciide0:0:0): using PIO mode 2 -------------- ALICE HAUT DEBIT : TRIPLE PLAY A 29,95 EUR/MOIS -------------- Dicouvrez vite ALICEBOX : avec le modem WIFI, profitez de l'ADSL, de la TELEPHONIE et en exclusiviti de la TELEVISION ! Binificiez aussi de la hotline gratuite 24h/24 ! Soumis ` conditions. Pour en profiter cliquez ici http://abonnement.aliceadsl.fr