Am Montag, dem 07.04.2025 um 20:01 +0300 schrieb Ethan:
> For the past day I've been struggling with an issue regarding the
> `siunitx` package. I've tried using the `\unit` command to format
> some units, but I kept getting an error message saying it can't
> operate while the `units` package is lo
Hello all,
For the past day I've been struggling with an issue regarding the `siunitx`
package. I've tried using the `\unit` command to format some units, but I
kept getting an error message saying it can't operate while the `units`
package is loaded. I did some digging (read the "LaTeX Configurat
Am Montag, dem 24.02.2025 um 10:28 +0100 schrieb Heiner Spiess:
> Dear Lyx Developer,
>
> I would like to report a bug. However, I’m currently not registered
> and the registration is closed. Do you mind sending me an invite for
> registration?
Done. Initial password comes in PM.
>
> Best regar
Dear Lyx Developer,
I would like to report a bug. However, I’m currently not registered and the
registration is closed. Do you mind sending me an invite for registration?
Best regards,
Heiner Spiess
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
https://lists.lyx.org/mailman/listinfo/lyx-dev
oided?
I can reproduce on current master. Just a bump in case someone is
motivated to take a look. Otherwise I may make a bug report.
Please make a bug report.
Done at #13151.
Thanks.
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
https://lists.lyx.org/mailman/listinfo/lyx-devel
> > I can reproduce on current master. Just a bump in case someone is
> > motivated to take a look. Otherwise I may make a bug report.
>
> Please make a bug report.
Done at #13151.
Scott
signature.asc
Description: PGP signature
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
https://lists.lyx.org/mailman/listinfo/lyx-devel
make a bug report.
Please make a bug report.
JMarc
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
https://lists.lyx.org/mailman/listinfo/lyx-devel
t
> > would be interesting to know how the corruption happened, as this is of
> > course a serious problem that should never happen.
>
> Additionally, if I open the chapter document directly, LyX gives me a
> SIGSEGV after clicking on "OK". Can this be avoided?
I can r
Am Fri, 27 Dec 2024 15:37:00 +0100
schrieb Scott Kostyshak :
> On Fri, Dec 27, 2024 at 01:03:32PM +0100, Jürgen Spitzmüller wrote:
> > Am Freitag, dem 27.12.2024 um 10:40 +0530 schrieb Dr. T. Venkatesan:
> > > Hello LYX manager,
> > >
> > > I have been using LYX software for more than 10 years
On Fri, Dec 27, 2024 at 01:03:32PM +0100, Jürgen Spitzmüller wrote:
> Am Freitag, dem 27.12.2024 um 10:40 +0530 schrieb Dr. T. Venkatesan:
> > Hello LYX manager,
> >
> > I have been using LYX software for more than 10 years for preparing
> > documents, thesis and etc., Recently I faced a bug issue
On Wed, Oct 30, 2024 at 04:52:07PM -0700, Fred Cheng wrote:
> I would like to report a bug that has occured in the latest version 2.4.2.
> May I register an account and report it on Bug Tracker? Thanks!
Registered. P
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
https://lists.lyx.org/mailman/
Hi,
I would like to report a bug that has occured in the latest version 2.4.2.
May I register an account and report it on Bug Tracker? Thanks!
To summarize, in the past versions the fancyhdr package had always been
loaded after the geometry package when selecting the `fancy` page style in
the doc
Am Wed, 9 Oct 2024 12:11:34 +0200
schrieb Kornel Benko :
> Am Wed, 9 Oct 2024 11:57:15 +0200
> schrieb Kornel Benko :
>
> > Am Wed, 9 Oct 2024 11:06:23 +0200
> > schrieb Pavel Sanda :
> >
> > > On Tue, Oct 08, 2024 at 08:22:05AM +0200, Jürgen Spitzmüller wrote:
> > > > Am Montag, dem 07.10
Am Wed, 9 Oct 2024 11:57:15 +0200
schrieb Kornel Benko :
> Am Wed, 9 Oct 2024 11:06:23 +0200
> schrieb Pavel Sanda :
>
> > On Tue, Oct 08, 2024 at 08:22:05AM +0200, Jürgen Spitzmüller wrote:
> > > Am Montag, dem 07.10.2024 um 12:21 +0200 schrieb Kornel Benko:
> > > > My own tests show:
> >
Am Wed, 9 Oct 2024 11:06:23 +0200
schrieb Pavel Sanda :
> On Tue, Oct 08, 2024 at 08:22:05AM +0200, Jürgen Spitzmüller wrote:
> > Am Montag, dem 07.10.2024 um 12:21 +0200 schrieb Kornel Benko:
> > > My own tests show:
> > > 99% tests passed, 1 tests failed out of 4111
> > > 1740 - export/doc/L
On Tue, Oct 08, 2024 at 08:22:05AM +0200, Jürgen Spitzmüller wrote:
> Am Montag, dem 07.10.2024 um 12:21 +0200 schrieb Kornel Benko:
> > My own tests show:
> > 99% tests passed, 1 tests failed out of 4111
> > 1740 - export/doc/LaTeXConfig_docbook5 (Failed)
> > manuals:export
> >
> > T
Am Montag, dem 07.10.2024 um 12:21 +0200 schrieb Kornel Benko:
> My own tests show:
> 99% tests passed, 1 tests failed out of 4111
> 1740 - export/doc/LaTeXConfig_docbook5 (Failed)
> manuals:export
>
> The error log shows:
> ...
> -- _err = 1, jingout =
> /usr9/BUILD/Mint21/BuildLyx
Am Mon, 07 Oct 2024 09:31:24 +0200
schrieb jspi...@gmail.com:
> Am Sonntag, dem 06.10.2024 um 12:11 -0400 schrieb Richard Kimberly
> Heck:
> > > Possible candidate for stable, but let's wait first whether it
> > > breaks
> > > some tests.
> >
> > When you are comfortable with it, go ahead.
>
Am Sonntag, dem 06.10.2024 um 12:11 -0400 schrieb Richard Kimberly
Heck:
> > Possible candidate for stable, but let's wait first whether it
> > breaks
> > some tests.
>
> When you are comfortable with it, go ahead.
I'll do that now that Scott has approved it doesn't break any of our
tests (thanks
On Sun, Oct 06, 2024 at 04:24:50PM GMT, Jürgen Spitzmüller wrote:
> Am Samstag, dem 05.10.2024 um 17:27 +0200 schrieb Jürgen Spitzmüller:
> > It breaks as it lands in
> >
> > \@mkboth{%
> >
> > \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
> >
> > in the book class (\Make
On 10/6/24 10:24 AM, Jürgen Spitzmüller wrote:
Am Samstag, dem 05.10.2024 um 17:27 +0200 schrieb Jürgen Spitzmüller:
It breaks as it lands in
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
in the book class (\MakeUppercase is not to blame here).
(listings
Am Samstag, dem 05.10.2024 um 17:27 +0200 schrieb Jürgen Spitzmüller:
> It breaks as it lands in
>
> \@mkboth{%
>
> \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
>
> in the book class (\MakeUppercase is not to blame here).
>
> (listings locally makes \let\contentsname\ls
Am Samstag, dem 05.10.2024 um 15:49 +0200 schrieb Jürgen Spitzmüller:
> Why this fails only with book classes is beyond me.
It breaks as it lands in
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
in the book class (\MakeUppercase is not to blame here).
(listin
Am Samstag, dem 05.10.2024 um 13:52 +0200 schrieb Léo de Souza:
> Adding the following ERT at the beginnig of the document prevents
> errors :
>
> \renewcommand{\lstlistlistingname}{Listings}
>
> I suspect the errors are happening because LyX automatically add a
> line in the preamble that co
Hello,
I would like to report that inserting a list of listings creates errors with
book document classes.
Environment:
I compiled LyX 2.4.2.1 on Ubuntu 22.04 with Qt6 enabled.
Steps to reproduce:
1. Create a new document: File > New
2. Set the document class to one of the book classes, for e
On Thu, Sep 26, 2024 at 12:17:48AM +, Georger Araujo wrote:
> Hi,
> I would like to report a bug but I forgot my Trac password (username:
> georger.araujo) and it seems the 'Forgot password?' link is not available in
> the Trac login screen. So I report it here. Sorry for the trouble.
Fixed
Hi,
I would like to report a bug but I forgot my Trac password (username:
georger.araujo) and it seems the 'Forgot password?' link is not available in
the Trac login screen. So I report it here. Sorry for the trouble.
Title: LilyPond preview does not work with LilyPond 2.24.1
Lyx version: 2.4.
Am Mittwoch, dem 17.07.2024 um 17:46 +0200 schrieb Léo de Souza:
> I would like to report that LyX hangs when copying an inline formula
> containing a thin space in an mbox.
I think this is
https://www.lyx.org/trac/ticket/13069
--
Jürgen
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://
Hello,
I would like to report that LyX hangs when copying an inline formula containing
a thin space in an mbox.
Environment:
I compiled LyX 2.4.1 on Ubuntu 22.04 with Qt6 enabled.
Steps to reproduce:
1. Create a new document: File > New
2. Create an inline formula: Insert > Math > Inline Form
On 2/12/24 03:23, Léo de Souza wrote:
On 10/02/2024 01:56, Richard Kimberly Heck wrote:
Should be fixed for RC3, at 91bd457a.
Riki
I confirm that this is fixed in RC3. Thanks a lot.
Thanks!
Riki
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-de
On 10/02/2024 01:56, Richard Kimberly Heck wrote:
> Should be fixed for RC3, at 91bd457a.
>
> Riki
I confirm that this is fixed in RC3. Thanks a lot.
Léo
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-devel
On 2/7/24 11:57, Richard Kimberly Heck wrote:
On 2/7/24 04:41, Léo de Souza wrote:
Hello,
I would like to report that LyX doesn't show the correct reference in
the work area for included listings when the option to do so is active.
Environment:
I compiled LyX 2.4.0~RC2 on Ubuntu 22.04 with
On 2/7/24 04:41, Léo de Souza wrote:
Hello,
I would like to report that LyX doesn't show the correct reference in the work
area for included listings when the option to do so is active.
Environment:
I compiled LyX 2.4.0~RC2 on Ubuntu 22.04 with Qt6 enabled.
Steps to reproduce:
1. Create a n
Hello,
I would like to report that LyX doesn't show the correct reference in the work
area for included listings when the option to do so is active.
Environment:
I compiled LyX 2.4.0~RC2 on Ubuntu 22.04 with Qt6 enabled.
Steps to reproduce:
1. Create a new document: File > New
2. Open Documen
Am Freitag, dem 15.09.2023 um 16:23 +0200 schrieb Jürgen Spitzmüller:
> Am Freitag, dem 15.09.2023 um 15:41 +0200 schrieb Thibaut Cuvelier:
> > Your patch looks fine to me.
> >
> > It looks cumbersome, especially if we need to do that several
> > times;
> > maybe we could have a method at the inse
On Mon, 2023-09-18 at 13:28 +0200, Pavel Sanda wrote:
> Actually maybe the python default in lyx's windows release is now v3
> so we don't need to do anything...
My thinking as well. :-)
--
José Abílio
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-de
On Mon, Sep 18, 2023 at 01:25:34PM +0200, Pavel Sanda wrote:
> On Mon, Sep 18, 2023 at 12:06:52PM +0100, José Matos wrote:
> > On Mon, 2023-09-18 at 10:39 +0200, Pavel Sanda wrote:
> > > Jose, does it mean that you propose patching Python source? Can't we
> > > fix this ourselves?
> > > Pavel
> >
On Mon, Sep 18, 2023 at 12:06:52PM +0100, José Matos wrote:
> On Mon, 2023-09-18 at 10:39 +0200, Pavel Sanda wrote:
> > Jose, does it mean that you propose patching Python source? Can't we
> > fix this ourselves?
> > Pavel
>
> This issue is discussed here. And now I understand why the need for
> r
On Mon, 2023-09-18 at 10:39 +0200, Pavel Sanda wrote:
> Jose, does it mean that you propose patching Python source? Can't we
> fix this ourselves?
> Pavel
This issue is discussed here. And now I understand why the need for
reload:
https://stackoverflow.com/questions/3828723/why-should-we-not-use-s
On Sun, Sep 17, 2023 at 04:55:32PM +0100, José Matos wrote:
> On Sun, 2023-09-17 at 11:48 +0800, Dai Longzhi ? wrote:
> > How to fix:
> > I found a way in Zhihu.com. It add this:
> > import sys
> > reload(sys)
> > sys.setdefaultencoding("utf-8")
> > in "C:\Program Files\LyX 2.3\Python\Lib\
On Sun, 2023-09-17 at 11:48 +0800, Dai Longzhi 戴龙至 wrote:
> How to fix:
> I found a way in Zhihu.com. It add this:
> import sys
> reload(sys)
> sys.setdefaultencoding("utf-8")
> in "C:\Program Files\LyX 2.3\Python\Lib\subprocess.py". Then the
> Reconfiguring works.
>
> I am not sure someone will
Bacis Info & Reproduce:
System: Windows 10 22H2 64-bit System Language is Chinese (Simplified)
Lyx: Fresh new installed LyX Version 2.3.7 with Texlive
full-installed
Path to Install: C:\Program Files\LyX
2.3\ # (Non-Chinese Path)
Debug message:
11:09:54.257: (buf
Bacis Info & Reproduce:
System: Windows 10 22H2 64-bit System Language is Chinese (Simplified)
Lyx: Fresh new installed LyX Version 2.3.7 with Texlive
full-installed
Path to Install: C:\Program Files\LyX
2.3\ # (Non-Chinese Path)
Debug message:
11:09:54.257: (buf
Am Mittwoch, dem 13.09.2023 um 14:45 +0200 schrieb Léo de Souza:
> I would like to report that the nomenclature function no longer works
> for me on LyX 2.4.0 beta 5.
Thanks. Confirmed and fixed in master.
--
Jürgen
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://lists.lyx.org/mailman/
Le 15/09/2023 à 16:23, Jürgen Spitzmüller a écrit :
(Wasn't this bug caught at some point by a static analyser? It seems
to be a too common error in C++ for it to slip through.)
Apparently not.
Coverity scan only tags this if in some other places of the code there
is a test for a null pointe
Am Freitag, dem 15.09.2023 um 15:41 +0200 schrieb Thibaut Cuvelier:
> Your patch looks fine to me.
>
> It looks cumbersome, especially if we need to do that several times;
> maybe we could have a method at the inset level, say
> getLocalFontOrDefault(const OutputParams&), to return either
> Output
On Fri, 15 Sept 2023 at 11:36, Jürgen Spitzmüller wrote:
> Am Freitag, dem 15.09.2023 um 10:45 +0200 schrieb Léo de Souza:
> > 1. Create new document: File > New
> > 2. Insert label: Insert > Label...
> > 3. On a new line, switch layout to "Labeling" or "Description"
> > 4. Insert cross-reference
Am 15.09.2023 um 15:26 schrieb Jean-Marc Lasgouttes :
>
> Le 15/09/2023 à 13:18, Stephan Witt a écrit :
>>> To me, this looks like this one:
>>> https://www.lyx.org/trac/ticket/12818
>>>
>>> We have a problem on macOS with the interpretation of the return values of
>>> QMessageBox.
>>>
>>> I se
Le 15/09/2023 à 13:18, Stephan Witt a écrit :
To me, this looks like this one:
https://www.lyx.org/trac/ticket/12818
We have a problem on macOS with the interpretation of the return values of
QMessageBox.
I see the patch there is not backported to 2.3.x. Is this normal?
I think it’s not back
Am 15.09.2023 um 11:44 schrieb Jean-Marc Lasgouttes :
>
> Le 15/09/2023 à 11:40, luxhacker a écrit :
>> Hi Pavel,
>> Please create an account for me. I am very interested in LyX.
>> It's difficult to reproduce or seize a problem without knowing anything
>> about it.
>> When looking at the stack,
On Fri, Sep 15, 2023 at 09:40:08AM +, luxhacker wrote:
> Please create an account for me. I am very interested in LyX.
done. p
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-devel
Le 15/09/2023 à 11:40, luxhacker a écrit :
Hi Pavel,
Please create an account for me. I am very interested in LyX.
It's difficult to reproduce or seize a problem without knowing anything about
it.
When looking at the stack, I get - perhaps wrongly - the impression it's
user-interface related
On Friday, September 15th, 2023 at 11:18 AM, Pavel Sanda wrote:
> On Fri, Sep 15, 2023 at 06:39:22AM +, luxhacker wrote:
>
> > New to LyX and appreciating it ! found no way to register. Is this ok ?
> > therefore mailing bug report
>
>
> It's ok. I can create the acco
Am Freitag, dem 15.09.2023 um 10:45 +0200 schrieb Léo de Souza:
> 1. Create new document: File > New
> 2. Insert label: Insert > Label...
> 3. On a new line, switch layout to "Labeling" or "Description"
> 4. Insert cross-reference: Insert > Cross-Reference...
> 5. Try copying this cross-reference
>
On Fri, Sep 15, 2023 at 06:39:22AM +, luxhacker wrote:
> New to LyX and appreciating it ! found no way to register. Is this ok ?
> therefore mailing bug report
It's ok. I can create the account if you are interested.
> What I do before ;) ?
>
> Immediately when crash
Can repeat on Mac Ventura 13.5.2.
/Anders
> On 15 Sep 2023, at 10:45, Léo de Souza wrote:
>
> Hello,
>
> I would like to report that LyX crashes with SIGSEGV when copying a cross
> reference from a "labeled list" or "description" layout on LyX 2.4.0 beta 5.
>
> Environment:
>
> I compiled L
Hello,
I would like to report that LyX crashes with SIGSEGV when copying a cross
reference from a "labeled list" or "description" layout on LyX 2.4.0 beta 5.
Environment:
I compiled LyX 2.4.0 beta 5 on Ubuntu 22.04 with Qt6 enabled and my Tex Live
install is up to date.
Steps to reproduce:
1
Dear All,
New to LyX and appreciating it ! found no way to register. Is this ok ?
therefore mailing bug report
Please find hereafter a crash of the LyX-system:
( 1) 1 lyx 0x00010bde4ddd
Hi,
I would like to report that the nomenclature function no longer works for me on
LyX 2.4.0 beta 5.
Environment:
I compiled LyX 2.4.0 beta 5 on Ubuntu 22.04 with Qt6 enabled and my Tex Live
install is up to date.
Steps to reproduce:
1. Create new document: File > New
2. Insert nomenclature
On Tue, Jul 18, 2023 at 10:04:03PM +0200, Christoph Schmitz wrote:
> In the meantime, this problem has been fixed. However, due to a compiler
> error, I can currently no longer compile LyX on macOS.
Fixed where?
We did not commit the fix yet. (But perhaps you don't use Qt 6.3.1 on platform
cocoa
In the meantime, this problem has been fixed. However, due to a compiler error,
I can currently no longer compile LyX on macOS.
> Am 18.07.2023 um 16:25 schrieb LyX Ticket Tracker :
>
> #12576: [Bug report] "Insert graphics" does not work an
Hello skostysh,
Sorry, I did not know that.
Best wishes,
Chris
> Am 28.10.2022 um 17:50 schrieb LyX Ticket Tracker :
>
> #12576: [Bug report] "Insert graphics" does not work anymore [LyX 2.4.0dev]
> -+-
> Reporter
Yes, I am.
Von meinem iPhone gesendet
> Am 27.10.2022 um 21:40 schrieb LyX Ticket Tracker :
>
> #12576: [Bug report] "Insert graphics" does not work anymore [LyX 2.4.0dev]
> -+-
> Reporter: docc | Owner: lasgo
On Mon, Oct 10, 2022 at 05:06:20PM +0200, Christoph Schmitz wrote:
> For some time now, "Insert graphics" no longer works in my self-compiled
> version of LyX 2.4. The window opens and I can search for a file. When I
> click on "Open", the window disappears, but the graphic file is not inserted.
For some time now, "Insert graphics" no longer works in my self-compiled
version of LyX 2.4. The window opens and I can search for a file. When I click
on "Open", the window disappears, but the graphic file is not inserted. It
seems to be a problem with the "file picker". If I enter the Unix fil
On Tue, Aug 07, 2018 at 11:36:56AM -0400, Scott Kostyshak wrote:
> On Tue, Aug 07, 2018 at 08:32:39AM +, Valmikanathan S wrote:
> > Hi,
> >
> >
> >
> > Please update the details on how to install with sequence and packages to
> > install for engineering mathematics and mathematical drawing.
On Tue, Aug 07, 2018 at 08:32:39AM +, Valmikanathan S wrote:
> Hi,
>
>
>
> Please update the details on how to install with sequence and packages to
> install for engineering mathematics and mathematical drawing.
>
>
>
> I am attaching the bug
Hi Valmikanathan, can you please send a m
Hi,
Please update the details on how to install with sequence and packages to
install for engineering mathematics and mathematical drawing.
I am attaching the bug
When I try to export to pdf from LYX after
typing the mathematics 12th grade exam papers.
; Please read the bug-reporting instructions in 'Help->Introduction' and send
> us a bug report, if necessary. Thanks!
> Bye.
> Error: LyX crashed!
>
> SIGSEGV signal caught!
> Sorry, you have found a bug in LyX, hope you hav
Linux Mint 18.1, compiled from the official sources 2.2.2.
/home/jb/newfile1.lyx.emergency
lyx: SIGSEGV signal caught!
Sorry, you have found a bug in LyX, hope you have not lost any data.
Please read the bug-reporting instructions in 'Help->Introduction' and send us
a bug report,
g. So please keep trying if you think you have found a bug.
Also, in *any* bug report, please always give details on your operating
system and the version of software that you're using. In this case, what
is your OS and what version of LyX do you use?
> Also, when I first open LyX and recal
Hello,
First of all, thank you guys for the wonderful program.
I guess I found a bug regarding the advanced search. After I tried to search
for a math expression several times, when I clicked the advanced search button,
it pops up an empty window.
Also, when I first open LyX and recall the
On 03/09/2014 10:44 PM, Tommaso Cucinotta wrote:
On 10/03/14 02:27, LyX Ticket Tracker wrote:
About update, I have a question: would it reset my preference setting?
Cause I spent a lot of time to set LyX, like fonts, output form, etc.
The most annoying side effect, if you update, is that th
On 10/03/14 02:27, LyX Ticket Tracker wrote:
> About update, I have a question: would it reset my preference setting?
> Cause I spent a lot of time to set LyX, like fonts, output form, etc.
The most annoying side effect, if you update, is that the new version of
LyX saves files with an updated L
\alpha_{k\right\}
> _{k=1:K}}\hfill
>
> Now, I want to replace the code "\hfill" to "a", but when I use the
> "find/repace" feature, LyX will stop working suddenly.
Hi Yu Fei,
Thanks for the report. This is the documentation list. I'm forwarding
your bug report to the developer list.
Best,
Scott
Am 20.01.2014 um 17:26 schrieb Richard Heck :
> On 01/20/2014 09:01 AM, Jean-Marc Lasgouttes wrote:
>> 16/01/2014 15:29, Stephan Witt:
Affecting more code is not a problem IMO. Does the createView() flash a
window on the screen?
>>>
>>> Yes, but it doesn't flash, it remains open. After
On 01/20/2014 09:01 AM, Jean-Marc Lasgouttes wrote:
16/01/2014 15:29, Stephan Witt:
Affecting more code is not a problem IMO. Does the createView()
flash a window on the screen?
Yes, but it doesn't flash, it remains open. After all, it's a work
around. :(
The proper solution requires the hand
16/01/2014 15:29, Stephan Witt:
Affecting more code is not a problem IMO. Does the createView() flash a window
on the screen?
Yes, but it doesn't flash, it remains open. After all, it's a work around. :(
The proper solution requires the handling of e.g. Preferences in GuiApplication.
Agreed
Am 16.01.2014 um 14:37 schrieb Jean-Marc Lasgouttes :
> 16/01/2014 13:23, Stephan Witt:
>> The dispatch and getstatus calls are made for application first and the for
>> the view.
>> The platform doesn't matter here.
>> It's different for a Mac to have a menu bar without any view.
>> But you're r
16/01/2014 13:23, Stephan Witt:
The dispatch and getstatus calls are made for application first and the for the
view.
The platform doesn't matter here.
It's different for a Mac to have a menu bar without any view.
But you're right if you meant to say it works on any platform.
I thought that th
Am 16.01.2014 um 10:49 schrieb Jean-Marc Lasgouttes :
> 16/01/2014 07:32, Stephan Witt:
>> Attached is a patch to work around a bug with crash on view close on Mac OSX.
>> See also https://bugreports.qt-project.org/browse/QTBUG-25399
>>
>> Is anyone able to verify or comment it?
>
> I am unfortu
16/01/2014 07:32, Stephan Witt:
Attached is a patch to work around a bug with crash on view close on Mac OSX.
See also https://bugreports.qt-project.org/browse/QTBUG-25399
Is anyone able to verify or comment it?
I am unfortunately no in a position to test it out. My only comment is
that the w
Attached is a patch to work around a bug with crash on view close on Mac OSX.
See also https://bugreports.qt-project.org/browse/QTBUG-25399
Is anyone able to verify or comment it?
Stephan
Am 15.01.2014 um 18:22 schrieb Richard Heck :
> On 01/15/2014 10:14 AM, Stephan Witt wrote:
>> Am 15.01.201
On 01/15/2014 10:14 AM, Stephan Witt wrote:
Am 15.01.2014 um 16:04 schrieb Richard Heck :
Where do we stand now with 2.0.7 on Mac?
I'd appreciate some feedback for by patch. Without this patch LyX (Cocoa-build)
crashes while closing the 2nd GuiView instance.
LyX 2.0.6 was Cocoa based and I do
Am 15.01.2014 um 16:04 schrieb Richard Heck :
> Where do we stand now with 2.0.7 on Mac?
I'd appreciate some feedback for by patch. Without this patch LyX (Cocoa-build)
crashes while closing the 2nd GuiView instance.
LyX 2.0.6 was Cocoa based and I don't want to change that.
Stephan
> On 01/
Where do we stand now with 2.0.7 on Mac?
Richard
On 01/07/2014 03:30 AM, Stephan Witt wrote:
Am 06.01.2014 um 16:58 schrieb Richard Heck :
On 01/06/2014 02:37 AM, Stephan Witt wrote:
Am 05.01.2014 um 22:28 schrieb Jean-Marc Lasgouttes :
Le 05/01/2014 21:35, Stephan Witt a écrit :
This l
Am 07.01.2014 um 09:30 schrieb Stephan Witt :
> Am 06.01.2014 um 16:58 schrieb Richard Heck :
>
>> On 01/06/2014 02:37 AM, Stephan Witt wrote:
>>> Am 05.01.2014 um 22:28 schrieb Jean-Marc Lasgouttes :
>>>
Le 05/01/2014 21:35, Stephan Witt a écrit :
> This looks interesting - from the Qt
Am 06.01.2014 um 16:58 schrieb Richard Heck :
> On 01/06/2014 02:37 AM, Stephan Witt wrote:
>> Am 05.01.2014 um 22:28 schrieb Jean-Marc Lasgouttes :
>>
>>> Le 05/01/2014 21:35, Stephan Witt a écrit :
This looks interesting - from the Qt docs:
"If you want all windows in a Mac appl
On 01/06/2014 02:37 AM, Stephan Witt wrote:
Am 05.01.2014 um 22:28 schrieb Jean-Marc Lasgouttes :
Le 05/01/2014 21:35, Stephan Witt a écrit :
This looks interesting - from the Qt docs:
"If you want all windows in a Mac application to share one menu bar, you must
create a menu bar that does n
Am 05.01.2014 um 22:28 schrieb Jean-Marc Lasgouttes :
> Le 05/01/2014 21:35, Stephan Witt a écrit :
>> This looks interesting - from the Qt docs:
>>
>> "If you want all windows in a Mac application to share one menu bar, you
>> must create a menu bar that does not have a parent.
>> Create a pare
Le 05/01/2014 21:35, Stephan Witt a écrit :
This looks interesting - from the Qt docs:
"If you want all windows in a Mac application to share one menu bar, you must
create a menu bar that does not have a parent.
Create a parent-less menu bar this way:
QMenuBar *menuBar = new QMenuBar(0);
Note
Am 05.01.2014 um 20:36 schrieb Jean-Marc Lasgouttes :
> Le 04/01/2014 22:32, Stephan Witt a écrit :
>> But sorry, now I have another unrelated problem, unfortunately.
>> It's a really old one: when repeatedly open and close the main window
>> LyX crashes in Qt-menu-code. There are references to th
Le 04/01/2014 22:32, Stephan Witt a écrit :
But sorry, now I have another unrelated problem, unfortunately.
It's a really old one: when repeatedly open and close the main window
LyX crashes in Qt-menu-code. There are references to this problem here:
* http://www.lyx.org/trac/ticket/7959
* https:
On 01/04/2014 04:32 PM, Stephan Witt wrote:
Am 04.01.2014 um 17:35 schrieb Richard Heck :
On 01/04/2014 07:14 AM, Jürgen Spitzmüller wrote:
Stephan Witt wrote:
Did you possibly try the patch on Linux?
Yes. I cannot see a problem with the patch.
Agreed. Go ahead and apply, and send me the co
On Sun, Jan 5, 2014 at 6:42 AM, Stephan Witt wrote:
> Am 05.01.2014 um 00:18 schrieb Scott Kostyshak :
>
>> On Thu, Jan 2, 2014 at 10:49 AM, Stephan Witt wrote:
>>
>>> There are no messages. LyX 2.0.7 is affected too on my system.
>>> It looks like the problem is a run-time effect and QFontMetric
Am 05.01.2014 um 00:18 schrieb Scott Kostyshak :
> On Thu, Jan 2, 2014 at 10:49 AM, Stephan Witt wrote:
>
>> There are no messages. LyX 2.0.7 is affected too on my system.
>> It looks like the problem is a run-time effect and QFontMetrics::maxWidth()
>> is the culprit. The attached patch helps.
On Thu, Jan 2, 2014 at 10:49 AM, Stephan Witt wrote:
> There are no messages. LyX 2.0.7 is affected too on my system.
> It looks like the problem is a run-time effect and QFontMetrics::maxWidth()
> is the culprit. The attached patch helps. But I don't know if there is another
> solution.
Why doe
Am 04.01.2014 um 17:35 schrieb Richard Heck :
> On 01/04/2014 07:14 AM, Jürgen Spitzmüller wrote:
>> Stephan Witt wrote:
>>> Did you possibly try the patch on Linux?
>> Yes. I cannot see a problem with the patch.
>
> Agreed. Go ahead and apply, and send me the corrected binary when it is
> ready
On 01/04/2014 07:14 AM, Jürgen Spitzmüller wrote:
Stephan Witt wrote:
Did you possibly try the patch on Linux?
Yes. I cannot see a problem with the patch.
Agreed. Go ahead and apply, and send me the corrected binary when it is
ready. I'll rebuild the source packages.
rh
Stephan Witt wrote:
> Did you possibly try the patch on Linux?
Yes. I cannot see a problem with the patch.
Regards,
Jürgen
1 - 100 of 718 matches
Mail list logo
