Mankens cq
http://www.mankens.com";>http://www.mankens.com/images/banner.jpg"; BORDER=0 WIDTH=468 HEIGHT=60>
Türk ve yabanci mankenlerin resim ve videolari
Ünlülerin gizli çekilmis kaçamaklari
Tamami sansürsüz filmler
Genç kizlarin çiplak
Tis strange that ALL of them exhibit the exact same problem.
Try swapping the top half of a good phone to the bottom half of a bad
phone to determine what part of the phone is bad.
On Sun, 11 Aug 2002 00:20:20 -0500 Timothy P Scharf <[EMAIL PROTECTED]>
writes:
> Hello All,
>
> I have about two
what is a KX-T 300?
Never heard of that number.
ed foust, BUSINESS TELEPHONE SYSTEMS, INC
- Original Message -
From: "Timothy P Scharf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 11, 2002 12:20 AM
Subject: KX-T: Series 7000 Hybrid Phones
> Hello All,
>
> I have
I have been using the Dupi disk I and now version II. The trouble we
have is that it can't recover it self with out the dupi disk using its
own formatting type. Other than that it work on any OS using IDE hard
drives.
We have 400+ OS2 based voice mail systems using this hardware :)
-Origin
What the heck is a kxt300?
You're not from round here are ya?
Are you domestic or abroad?
- Original Message -
From: "Timothy P Scharf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 11, 2002 1:20 AM
Subject: KX-T: Series 7000 Hybrid Phones
> Hello All,
>
> I have a
Sorry,
I meant a KX-T336, not a T300. Long weekend...
Tim
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
___
At 08:11 PM 8/11/2002 -0500, Timothy P Scharf wrote:
>Sorry,
>
>I meant a KX-T336, not a T300. Long weekend...
A 336 has to have lines assigned in order for the buttons to work or it
will, indeed, look like an intercom only phone.
Do ANY phones work on the ports?
Carl
__
Tim;
Make sure that you have a DN number assigned to the port, that the port
is installed and that the port is in service. Also, see if your port goes
from "(F)ail" to "(I)n service" on the "port status monitor" screen when you
plug the phone into the port. You will need to refresh the scr
Yes, we have these same series phones connected to PLC and HLC ports that
work. In fact we have about 50 in service that work fine. When I plug
in one of these bad phones (into a known good port of a working phone)
they act like I mentioned before. We have a "graveyard" of two dozen of
these ba
At 08:44 PM 8/11/2002 -0500, you wrote:
>Yes, we have these same series phones connected to PLC and HLC ports that
>work. In fact we have about 50 in service that work fine. When I plug
>in one of these bad phones (into a known good port of a working phone)
>they act like I mentioned before. We
Always check the RJ14, they often break the solder away from the jack,
causing problems. There is a voltage regulator near the RJ14 that has
similar problems occasionally, especially on the 7030. If you are as old
as I am, you will need a magnifying glass to see the cold solder joints
clearly.
Thanks to everyone for the suggestions on the bad phones.
Tim
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
_
12 matches
Mail list logo
