Thank-you thank-you. 20v works.
Note to others: The Sipura seems to recognize the PSTN line status when
it feels like it. I lowered to 20v and placed a test call which
immediately worked. I then unplugged the KXT line from the Sipura and
plugged it in again later and it didn't work. Powercycling
Just an "aside", look at the Vega 25
http://www.keison.co.uk/vegastream/vega_25.htm
Look familiar ?
I have one of these, which we have not got around to playing with as a
"point to point " audio link
On the other subject -
I had a problem with a Viking RAD-1 ( line powered) on a local pots
Roland H. Alden wrote:
> I have an old KXT 616 and a brand new Sipura 3000. The 3000 has an FXO
> port and works fine when plugged into Verizon but when it tries to make
> a call out through a station port on the KXT it (I think) tries to seize
> the line and then reports a "AUD:Stop PSTN Tone" eve
( bounced again, one of these days i'll get used to this new email program)
just some ideas to try
a. the 616 ports will not provide cpc (or will any kxt or kxtd as
anyone that every hooked up an answering machine will know ;-)
b. the "battery" of the 616 port is about 30 vdc, the sip might b
ven't checked
lately to see if any of their updated firmware fixed the problem.
Bob
-- Original Message ---
From: "Roland H. Alden" <[EMAIL PROTECTED]>
To:
Sent: Sat, 17 Sep 2005 17:47:06 -0700
Subject: KX-T: sipura 3000 PSTN port -> KXT station port
I have an old KXT 616 and a brand new Sipura 3000. The 3000 has an FXO
port and works fine when plugged into Verizon but when it tries to make
a call out through a station port on the KXT it (I think) tries to seize
the line and then reports a "AUD:Stop PSTN Tone" event.
This event appears to be
6 matches
Mail list logo
