eitag, 07. November 2003 04:32
To: kr...@mylist.net
Subject: Re: KR>Fw: Revmaster oil - GPAS engine oil
Did you break your engine in with conventional 30 w oil? If not that's the
problem you never broke it in. Mobil ones for me i was going to try the
wal
mart brand but after think about
659
> Email - sub @ for "at" jfaughn "at" socket.net
> Web Site http://jfaughn.com
>
> -Original Message-
> From: krnet-boun...@mylist.net
> [mailto:krnet-boun...@mylist.net] On
> Behalf Of Dan Heath
> Sent: Thursday, November 06, 2003 5:29 PM
> To: kr.
- Original Message -
From: Mac McConnell-Wood
To: kr...@mailinglists.org
Sent: Thursday, November 06, 2003 10:51 AM
Subject: Revmaster oil
Has anyone out there used synthetic oil in a Revmaster? I know Willie swears by
it, but I get the impression that the engine tightens up when it
lesson.
Cheers
Christian
OE-VPD
http://www.members.aon.at/oevpd
-Original Message-
From: Mac McConnell-Wood [mailto:macw...@tinyworld.co.uk]
Sent: Donnerstag, 06. November 2003 16:29
To: KR builders and pilots
Subject: KR>Fw: Revmaster oil
- Original Message -
From:
Amsoil is slicker and will keep down temps better than petrolem
oils. Keeps engine from getting so hot
that parts close up clearances., Virg
On Thu, 6 Nov 2003 15:29:19 - "Mac McConnell-Wood"
writes:
>
> - Original Message -
> From: Mac McConnell-Wood
> To: kr...@mailingli
riginal Message-
> From: Mac McConnell-Wood [mailto:macw...@tinyworld.co.uk]
> Sent: Donnerstag, 06. November 2003 16:29
> To: KR builders and pilots
> Subject: KR>Fw: Revmaster oil
>
>
>
> - Original Message -
> From: Mac McConnell-Wood
> To: kr...@mailin
; OE-VPD
> http://www.members.aon.at/oevpd
>
>
>
>
> -Original Message-
> From: Mac McConnell-Wood [mailto:macw...@tinyworld.co.uk]
> Sent: Donnerstag, 06. November 2003 16:29
> To: KR builders and pilots
> Subject: KR>Fw: Revmaster oil
>
>
>
> - O
-Builder.org - Click on the pic
See our EAA Chapter 242 at http://EAA242.org
---Original Message---
From: KR builders and pilots
List-Post: krnet@list.krnet.org
Date: Thursday, November 06, 2003 2:29:18 PM
To: macw...@tinyworld.co.uk; kr...@mylist.net
Subject: Re: KR>Fw: Revmaster
2003 5:29 PM
To: kr...@mylist.net
Subject: Re: KR>Fw: Revmaster oil
Is Amsoil a synthetic? I understand that synthetics do not do well in
air and oil cooled engines because they do not transfer as much heat as
regular oil.
N64KR
Daniel R. Heath - Columbia, SC
da...@kr-builder.org
on 11/6/03 4:38 PM, Jim Faughn at jfau...@socket.net wrote:
> I use Valvoline (sp?) Durablend. It is a partial Synthetic and when I
> started using it, I found my oil temp dropped 10 degrees. I went to it
> because it provided a higher breakdown temp than typical oil and was
> reasonably priced al
10W 30
Jim
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On
Behalf Of Jim Morehead
Sent: Thursday, November 06, 2003 7:23 PM
To: KR builders and pilots
Subject: Re: KR>Fw: Revmaster oil
on 11/6/03 4:38 PM, Jim Faughn at jfau...@socket.net wr
I used Mobile 1 for a short time but developed more oil leaks. the oil
temps did drop 10 deg though.
On Thu, 6 Nov 2003 15:29:19 - "Mac McConnell-Wood"
writes:
>
> - Original Message -
> From: Mac McConnell-Wood
> To: kr...@mailinglists.org
> Sent: Thursday, November 06, 2003 10
gt; ---Original Message---
>
> From: KR builders and pilots
> Date: Thursday, November 06, 2003 2:29:18 PM
> To: macw...@tinyworld.co.uk; kr...@mylist.net
> Subject: Re: KR>Fw: Revmaster oil
>
> Amsoil is slicker and will keep down temps better than
Did you break your engine in with conventional 30 w oil? If not that's the
problem you never broke it in. Mobil ones for me i was going to try the wal
mart brand but after think about it all stick with a winner although house
brand
is Pennzoil at $2.38 qt it is attractive
Vs $5.00
m
I too use that oil Jim, both in my Sonerai and the KR, no problems.
Tim
- Original Message -
From: "Jim Faughn"
To: "'KR builders and pilots'"
Sent: Thursday, November 06, 2003 7:38 PM
Subject: RE: KR>Fw: Revmaster oil
> I use Valvoline (sp?) Dura
about 85°C (182°F) oil temp at the end of a
5 min 85 kts climb out at 3bar (45psi).
Christian
OE-VPD
http://www.members.aon.at/oevpd
-Original Message-
From: flymaca711...@aol.com [mailto:flymaca711...@aol.com]
Sent: Freitag, 07. November 2003 04:32
To: kr...@mylist.net
Subject: Re: KR>
16 matches
Mail list logo
