Re: KR> major success!!

2017-05-25 Thread brian.kraut--- via KRnet
t want you to go through all the head scratching and cursing I did. Brian Kraut 904-536-1780 br...@eamanuacturing.com Original Message Subject: Re: KR> major success!! From: Larry Flesner via KRnet Date: Tue, May 23, 2017 7:25 pm To: KRnet Cc: Larry Flesner A If you are

Re: KR> major success!!

2017-05-24 Thread Tommy Waymack via KRnet
Good job Larry.Tommy W. Virus-free. www.avg.com <#DAB4FAD8-2DD7-40BB-A1

Re: KR> major success!!

2017-05-23 Thread Larry Flesner via KRnet
At 09:03 PM 5/23/2017, you wrote: Larry, did you put sealant on the case halves at the bosses around the crankshaft where your main bearings are? Brian Kraut If you are referring to the area that the "through bolts" got through the case

Re: KR> major success!!

2017-05-23 Thread brian.kraut--- via KRnet
the bosses didn't make good contact. Brian Kraut 904-536-1780 br...@eamanuacturing.com Original Message -------- Subject: KR> major success!! From: Larry Flesner via KRnet Date: Tue, May 23, 2017 4:04 pm To: krnet@list.krnet.org Cc: Larry Flesner Other minor concerns are: #4 cyli

KR> major success!!

2017-05-23 Thread Larry Flesner via KRnet
After some trouble shooting and repair I seemed to have fixed my major oil leak. With Jeff Scott's knowledge and insight, I was able to locate and repair a bad seal on the #1 cylinder intake valve push rod tube boot seal. Another short flight showed no major leaks. I did have one strip of