At 09:03 PM 5/23/2017, you wrote:
Larry, did you put sealant on the case halves at the bosses around the crankshaft where your main bearings are? Brian Kraut
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you are referring to the area that the "through bolts" got through the case and act as a cylinder base stud for two of the cylinders, the answer is yes. I used light amount of sealant and a double silk thread. It would seem if that was the leak it would appear on both sides of the case, not just #4 cylinder. I did my best to insure the square "O" ring was seated good on the cylinder base. It's not a bad leak but I see evidence of oil half way around the cylinder base with maybe a half drop on the lower bolt. I'll be zeroing in on that and other leaks as the flights continue.
Larry Flesner
_______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
