That is the area I was referring to. For some reason my oil only showed coming from one side. if you had your case overhauled and used sealant you are probably fine there. If you didn't have your case machined it is still likely the cylinder base seal. Just in case it is not I didn't want you to go through all the head scratching and cursing I did.
Brian Kraut 904-536-1780 br...@eamanuacturing.com -------- Original Message -------- Subject: Re: KR> major success!! From: Larry Flesner via KRnet <krnet@list.krnet.org> Date: Tue, May 23, 2017 7:25 pm To: KRnet <krnet@list.krnet.org> Cc: Larry Flesner <fles...@frontier.com> A If you are referring to the area that the "through bolts" got through the case and act as a cylinder base stud for two of the cylinders, the answer is yes. I used light amount of sealant and a double silk thread. It would seem if that was the leak it would appear on both sides of the case, not just #4 cylinder. I did my best to insure the square "O" ring was seated good on the cylinder base. It's not a bad leak but I see evidence of oil half way around the cylinder base with maybe a half drop on the lower bolt. I'll be zeroing in on that and other leaks as the flights continue. Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
