John
I think I can do this now. But I wouldn't have time to get it until the
middle of July. I'll send you some money next week and we'll arange a get
together for the final exchange and money.
Do me a favor. Run a feeler gauge on all of the skin to any work the it's
glued to. Make a point
Subject: KR> Scott Crossfield
In 1962 as I was just starting to fly gliders in Tehahcapi. I met both
Crossfield & Walker. Boy was I excited to meet them. They came up to
Tehachapi to do some training in gliders. And this was the place to do that
west of the Rockies.
I was hoping to be ab
- Original Message -
From: "D F Lively"
To: "KRnet"
Sent: Monday, March 27, 2006 5:03 PM
Subject: Re: KR> KR on eBay
> Bob & listees:
>
> Where can 1/4 sawn Douglas Or Hem-fir be had?
>
> What about Lodge-Pole Pine? I do not know much about its strength but it
> like
> has a very st
Mark Lankford wrote:
> Here's my question: Has anybody else had water in their fuel, and if so,
> is
> the symptom that the engine cuts in and out rapidly and more or less
> sputters and scares the crap out of you?
Mark
Yes, I had some (small amount) in my Turbo Viking years ago. It was about
Mark.
Have you already have your inspection, either a DAR or a FISDO to look at
your plane. I'm asking to see if I could paint first or if I have to leave
it in primer?
Greg Martin
o. Just call a DAR and get the licenseing done
an you'd be on your way. Wife doesn't like the looks of the thing. So It
goes.
Greg Martin idrawtobu...@bak.rr.com
661-747-8608
- Original Message -
From:
To:
Sent: Wednesday, December 14, 2005 9:54 PM
Subject: KR> Stretching the KR2S???
>I am starting on a KR2S and im adding a extra 14" bay to the aft end, and
>will be widening the cabin 6" also. I have heard where I would need to add
>extra longerons for t
As listed these are all very important and necessary. Another that should
be added is to make sure that the when the plane is sitting still. Look at
the nose gear leg and make sure that it has an angle of about 3 degrees when
looking at the gear leg from the side, or 90 degrees to the center l
Can you send some pictures and copies of the log books.
Greg Martin
- Original Message -
From:
To:
Sent: Monday, September 05, 2005 9:02 AM
Subject: KR> KR-1 Fuselage and Remaster Eng for Sale
>I have a KR-1 Fuselage with sliding canopy and retracts with a Revmaster
>2100
> for sale
I looked at the krgathering.org and found 'Thursday'. Which Thursday are
you speaking of, August the 18th.? Because I know of 52 per year. Ha Ha.
Greg Martin
- Original Message -
From: "Mark Jones"
To: "KRnet"
Sent: Wednesday, August 17, 2005 8:00 AM
Subject: RE: KR> kr gathering
Does anyone know of a source for a wood crush plate? This engine came with
a prop hub extension but not crush plate.
Greg Martin
I'm sorry, a Metal (alunimum) crush plate for a wood?
- Original Message -
From:
To: "KRnet"
Sent: Tuesday, August 02, 2005 2:27 PM
Subject: Re: KR> Wood Prop Crush for 0-200
> Does anyone know of a source for a wood crush plate? This engine came
> with
> a prop hub extension but not
12 matches
Mail list logo
