Louis Staalberg
Payson, Arizona
N9FL"a...@npgcable.com
Robin, I know of three KR-2 builders in the Netherlands.
1.Marcel Driessen (driess...@tiscali.nl Flying PHKRS
2.Aart Weerts As far as I know finished building,PHOMI
3.Hermman Myling PHMIJ
Jim Sellars wrote:"...Have you got a tail wheel assembly? "
Jim,
I sent a messaqge to you off line stating I have one.
Have not received a reply.
Please contact me on Net or Off Line.
You can also call me if you wish:
928 474 0594
Dene Collett wrote:
> My question was whether the SWR meter that I have used on CB freq was
>able to do airband freq as I was always under the impression that it
>didn't care
> what freq passed through it.
SWR meters *do* care about the freq. The Bird Watt meter has many
inserts
for different
Mark L. wrote:
To Don Chisholm.
I have sent a msg to the below chizmsupholst...@rogers.com
and it bounced twice with statement
"has no account at rogers.com'
Please send me address for off-line contact.
Sorry Net!
Louis Staalberg
Payson, Arizona
N9FL"at"cbiwireless.com
- Original
ople with the failures but went broke.Could also be the
law suite.
Thanks Randy
Well, I will just have to bold on the engine and not worry
what type it really is as long as it pulls the KR-2 through the air!
Thanks every body.
Louis Staalberg
Payson, Arizona
N9FL"at"cbiwireless.com
.
Here are the specifications
V.W. based
Name: 75-DEH Magnum
Rated at 75 HP at 3400 rpm
Dual Electronic Ignition
Hydraulic Valve Lifters
Displacement 1915cc.
Question: Which type, 1,2,3 or 4 is the closest to this engine?
Or, is it a unique engine all by itself?
Louis Staalberg
Payson, Arizona
N9FL
Mark wrote:
>... I then disconnected the transceiver antenna at the radio
> and the symptom went away.
Something else could be the trouble and I have not seen that
possibility mentioned by others with their excellent replies.
The coaxial cable that goes from your transce
Mark wrote:
> Make that NEWARK ELECTRONICS, at http://www.newark.com/ ...
>
>
Also: MOUSER ELECTRONICS
Mouser.com
1-800-346-6873
Free catalog, 1701 pages!
Louis Staalberg
N9FL"at"cbiwireless.com
Serge Vidal wrote:
> Last time I mixed some Epoxy, I noticed that there were
> plenty tiny bubbles in it.
I don't know what epoxy you use but I usualy have the
same "problem" while mixing Rand A and B epoxy.
If I pour the resin too fast or stir the mixture too vigorously
I get air bubbles in th
D F Levely wrote:
Paul in Derry, NH wrote:
Eduardo wrote:
"Eduardo Navarrete"
David Swanson wrote:
two pages down you
will find: "Figure 2: AN Aircraft Bolt Dimensions"
Click on that one and you get a whole table of dimensions.
Perhaps that helps. Otherwise, there are beaucoup more
hits on Google.
Regards,
Louis Staalberg
Payson Arizona
N9FL "at" cbiwireless.com
Mark Jones wrote:
<<...the front cylinders were blocked from any direct cooling air as you
<
short answer is that pin 15 is a no connection and pin 1 is
Power Ground.
Hopefully that helps.
Regards,
Louis Staalberg
n...@cbiwireless.com
Payson, Arizona.
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsub
painting of the WAF's there is tons of
information in the archives.In my case I am thinking about
zinc chromate but there are as many answers to your
question as there are KR-2's.
Regards,
Louis Staalberg
Payson, Arizona
n...@cbiwireless.com
anding and sanding and sanding.!
When finished, the ribs (B), (C), (D) and (E) will have just the right
shape.
Hope this helps, good luck. If you have more questions, feel free to
contact me off line.
Louis Staalberg
Payson, Arizona
n...@cbiwireless.com
FYI
www.Ellison-Fluid-Systems.com
states the following:
"model discontinued and no longer in production"
Regards,
Louis Staalberg
Payson, Arizona
n...@cbiwireless.com
the N
Step 6: Scoll down to "Registered owner"
(You will find name and address)
Note: By law, every registered owner is required to update his
address.
Good Luck
Louis Staalberg
Payson, Arizona
n...@cbiwireless.com
Patricia and others.
My stainless sheet is 0.007 inches thick.
It is or was on the parts catalog from RR.
Now my question to the list:
My stainless sheet is already attached to the 1/4 inch
firewall.
I need to drill holes.
Is there a drill bit that cuts thru the stainless?
So far no joy.
Louis
45 Amps.
Note: DEH obviously stands for Dual, Electronic, Hydraulic.
Hope this helps. Sorry for late reply but vacation came
between then and now.
Regards,
Louis
Louis Staalberg
Payson, AZ
n...@cbiwireless.com
<
< radio noise fixed!
<< required liquid flux to get it to flow it all,
Please allow me to make a remark to the guru of all
guru's.
Nowhere in the electronics world is there ever a need to
use a liquid flux. Perhaps you used the wrong solder.
For the benifit of all readers:
Use *only* 60/40
Putting two batteries in parallell is a *bad* idee. Supppose one cell of
one battery
shorts internally. This happens frequently with automotive batteries.
The one battery then becomes a 10 Volt battery and the other one will
send
an extremely high current to that battery which can actually cause
Lee Van Dyke wrote:
<..am now to the point that I need to buy some paint for
Aviation News has very good and timely information.
It is free. To sign up go to:
http://www.avweb.com/profile
Louis
Payson, Arizona
n...@cbiwireless.com
KR-Netters
I have changed my e-mail address as follows:
Old: n...@cybertrails.com
New: n...@cbiwireless.com
Regards,
Louis
Payson, Arizona
n...@cbiwireless.com
Congratulations!!
Do you have it already for sure for sure
Louis
Payson, Arizona
n...@cybertrails.com
Sorry Net, did not really mean to send it to
450 subscribers.
Louis
Payson, Arizona
n...@cybertrails.com
ank (which I will also make removable)
and (in my case) access the the retractable nose wheel.
Right now the epoxy is drying but later on , I could make some pictures.
Probably too late for you but...it is nice to have access to that whole
area.
Merry Christmas to all.
Louis Staalberg
n...@cybertrails.com
Payson, Arizona.
Rick, I have an old refrigarerator in the basement to
keep pop etc cool.
One of the posts that supports a shelve broke off and I
glued it back with the Rand Robinson A & B
epoxy ( Epon resin 813 and Versamid 125).
I never shut off the refrigerator which is kept at
about 40 to 45 degrees. A week la
From: "William Clapp"
To: "KR builders and pilots"
Sent: Tuesday, August 19, 2003 07:58 PM
Subject: KR>Turtledeck heigth
< What I wanted to see was a response from someone in the way of a measured
Here is what I did! Get some kids Play Dough, put a piece of wax paper
where the gusset is going to be, squeez the Play Dough in that spot and
remove carefully and, voila, you wil have a perfect three dimensions model.
Regards,
Louis Staalberg
n...@cybertrails.com
Payson, Arizona,USA
34-11.729 N
, much,
Louis Staalberg
n...@cybertrails.com
Payson, Arizona,USA
34-11.729 N
111-19.383W
36 matches
Mail list logo
