attached fittings for the gear legs but I don't have any usable gear leg
> blanks.
>
> On Sat, Oct 14, 2023, 4:17 PM Jim Litchfield via KRnet <
> krnet@list.krnet.org> wrote:
>
>> Subject: Fixed gear attach brackets:, composite gear leg blanks:, axle
>> attach bra
Subject: Fixed gear attach brackets:, composite gear leg blanks:, axle
attach brackets
I am looking for subject pieces or drawings or potential sources.
Any leads ?
Seems like someone posted about e machine shop for the gear brackets just
recently, but it doesn't come up on archive searches.
Arc
Subject: Props & performance
Does anyone have any new performance data with a Corvair powered KR ?
I have looked at Marks performance spreadsheet. Does anyone have any newer
data ?
Also I am looking for a prop for my project. I'm using a 2700cc Corvair.
I have an Ed Sterba prop for sale or trade. I
I'll try the simpler set up as
suggested by Craig.(Thanks Craig)
Hopefully this will work out and move this project closer to completion.
Regards to all and keep building !
Jim Litchfield
East coast.
On Thu, Feb 23, 2023 at 12:48 PM Jim Litchfield via KRnet <
krnet@list.krnet.org> wrote:
Hi Mark,
Thanks for the rapid response.
I kinda thought the answer was what you said but was wondering if there was
a way to do it sorta like when you use the 14mm sensors under the spark
plugs to eliminate drilling into the exhaust pipes themselves. I was hoping
to clamp the sensors to the pipes r
Subject: EGT Sensors
To install EGT sensors on a Corvair do the exhaust manifolds have to be
drilled ?
Thanks
Jim Litchfield
East Coast
On Thu, Feb 23, 2023 at 8:49 AM Flesner via KRnet
wrote:
>
> On 2/22/2023 9:31 PM, Mark Langford wrote:
>
> Fiberglass and carbon fiber are so light that any im
Great video Craig-
Yes it could have been much worse ! this could have happened on any one
of your previous flights. Someone is watching out for you.
I am assembling my engine now (Corvair also)and this scenario begs the
question-
Are there any preventive measures that I can take at this point (hea
Sent from my iPhone
> On Sep 13, 2022, at 11:12 AM, Terry Williams via KRnet
> wrote:
>
> I did get an email response from Steve G. I really appreciate that he did
> that. He said that there is no way to order from website any longer. So,
> there's my answer. I will wait for Freebird plans
Should the voltage regulator be placed on the cabin side of the firewall to
avoid the heat of the engine compartment ?
Jim Litchfield
Virginia
Sent from my iPhone
> On Aug 29, 2022, at 7:59 AM, Gerald Campbell via KRnet
> wrote:
>
>
> Hello
> I am not good with technology but I would like
What should be used to install opera windows in the aft deck ?
Epoxy with flox ?
epoxy with micro ?
silicone based caulk ?
Please --- no speculation - I would like to hear from builders who have
done this or seen it done successfully and are happy with the results.
Should I be concerned with differ
and then go to a number 2. If you
> can let the paint cure a few weeks before buffing, you will get a much
> higher gloss finish. Basically, the longer you let it cure and the harder
> it gets before cutting and buffing, the better the results.
>
> Ok, I wrote a lot and there is
OK --
The net seems pretty sleepy now so I'll post a question.
I am ready to prime the bottom of my project and have been out of the loop
regarding primers/paints for about 20 years.
Can anyone recommend a primer/topcoat combo.
I have friends who swear by Poly Fiber for the pinhole solution but t
Hi fellow builders/ fliers
I am trying to find firewall material - preferably .005 stainless steel big
enough to cover the firewall without seams and am not having much luck.
I have checked the archives for a source with no luck.
Neither Wicks nor ACS have it. Neither does Mcmaster Carr.
I have spe
What thickness of fiberfrax should be used for firewall insulation.
While ACS sells 1/16" and 1/8" I have found that it is available in 1/4"
and thicker from other sites.
Is thicker necessary ? Cost effective ?
Also I found a product called Isofrax paper. Anybody used this ? It is made
by the same
Which model servo is being used:
T2-7A or
T3-12A
The T3 has longer travel (1.2") but is the extra travel needed ???
Jim Litchfield
S.E. VA.
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRne
Does anyone have contact info for Dave Goodman?
He built a Kr that he called Goliath. It had a blue/gray camo paint scheme.
The link in the KRNET seems to be broken.
Thanks,
Jim Litchfield
S.E. Virginia
___
Search the KRnet Archives at https://www.mail
16 matches
Mail list logo
