KR> New plane

Hi Brian, Bob Carroll here . I have a real interest in the 2S project, lets talk. 1-614-254-7964. bobcarroll5...@yahoo.com. Thanks. Bob Sent from my iPad On Dec 17, 2012, at 10:14 PM, wrote: > Happy to report that I am now the new owner of a Mustang 2!!! > > In KR related news that means

KR> aileron pushrod +ends

Dean Choitz wrote: >I need to get aileron pushrods and rod ends. Does any place sell a kit or >do you order everything separately? Most KRs use cables, but my next plane will also have aileron pushrods. It may be a little heavier, but if one falls off, at least the other side still works! I

KR> aileron pushrod +ends

>I need to get aileron pushrods and rod ends,does any place sell a kit or do >you order elerything separtly. what >are most kr2s using thanks Dean Choitz >7858108319 Dean, There are no kits that I know of however here is a link to what you need for the rod end bearings used in place of hinge

KR> Fixing a mistake

That will be fine. You will actually wind up with a stronger spar that way. Original Message Subject: KR> Fixing a mistake From: "Gary Robison" List-Post: krnet@list.krnet.org Date: Mon, December 17, 2012 9:22 am To: "KRnet" I made a wrong cut on my rear main spar (AS airfoi

KR> aileron pushrod +ends

I need to get aileron pushrods and rod ends,does any place sell a kit or do you order elerything separtly. what are most kr2s using thanks Dean Choitz 7858108319

KR> New plane

Happy to report that I am now the new owner of a Mustang 2!!! In KR related news that means the bad news is that I might not finish my 2S project. The good news is that I might sell a very nice project. The even better news is that I might start using my free time to start working on my 4 pl

KR> Dynon AP in a KR and other homebuilts

As I posted, I did not know why the setting of the Turn Rate Limit to 0 would help. Here is the reply from Dynon. As I said, they are very supportive. There is an alternate set of control algorithms which may improve roll performance in some aircraft. To try this mode simply set TRN RT LMT to

KR> New Lighter Batteries

The prices will come down as more Elec cars are produced and the tech gets better. I'm crossing my fingers for when they are light enough and small enough that we can go for a few hours of flight and have a quick recharge. The age of Elec flight would be so much better, in that it's actually simple

KR> Fixing a mistake

Gary, Yes. Glue a cap on the spar with T-88 and re-cut it. Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com - Original Message - From: "Gary Robison" To: "KRnet" Sent: Monday, December 17, 2012 10:22 AM Subject: KR> Fixing a mistake I made a

KR> Fixing a mistake

I made a wrong cut on my rear main spar (AS airfoil) The spar was to be cut 4.77" with a 12 deg cut on top and a 9 deg on the bottom. I made the 9 degree cut the wrong direction this /---/instead of /---\ I had read some place that if you had cut your spar

KR> New Lighter Batteries

I borrowed this discussion from the SuperCub forum.  One of the guys put in a link to these new Lithium Iron batteries.   .  While they are a bit pricy, what really grabbed me was the weight.  When I looked up the battery that would replace the 10+ lb